Job ID = 9163612 sra ファイルのダウンロード中... Completed: 720362K bytes transferred in 9 seconds (617130K bits/sec), in 1 file, 2 directories. sra ファイルのダウンロードが完了しました。 Read layout: SINGLE fastq に変換中... Written 21589717 spots for /home/okishinya/chipatlas/results/sacCer3/SRX964234/SRR1924341.sra Written 21589717 spots total rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:03:52 21589717 reads; of these: 21589717 (100.00%) were unpaired; of these: 1066101 (4.94%) aligned 0 times 16306373 (75.53%) aligned exactly 1 time 4217243 (19.53%) aligned >1 times 95.06% overall alignment rate Time searching: 00:03:52 Overall time: 00:03:52 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_sort_core] merging from 12 files... [bam_rmdupse_core] 8692893 / 20523616 = 0.4236 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Wed, 28 Jun 2017 11:14:32: # Command line: callpeak -t SRX964234.bam -f BAM -g 12100000 -n SRX964234.20 -q 1e-20 # ARGUMENTS LIST: # name = SRX964234.20 # format = BAM # ChIP-seq file = ['SRX964234.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 11:14:32: #1 read tag files... INFO @ Wed, 28 Jun 2017 11:14:32: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 11:14:32: # Command line: callpeak -t SRX964234.bam -f BAM -g 12100000 -n SRX964234.05 -q 1e-05 # ARGUMENTS LIST: # name = SRX964234.05 # format = BAM # ChIP-seq file = ['SRX964234.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 11:14:32: #1 read tag files... INFO @ Wed, 28 Jun 2017 11:14:32: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 11:14:32: # Command line: callpeak -t SRX964234.bam -f BAM -g 12100000 -n SRX964234.10 -q 1e-10 # ARGUMENTS LIST: # name = SRX964234.10 # format = BAM # ChIP-seq file = ['SRX964234.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 11:14:32: #1 read tag files... INFO @ Wed, 28 Jun 2017 11:14:32: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 11:14:40: 1000000 INFO @ Wed, 28 Jun 2017 11:14:40: 1000000 INFO @ Wed, 28 Jun 2017 11:14:40: 1000000 INFO @ Wed, 28 Jun 2017 11:14:48: 2000000 INFO @ Wed, 28 Jun 2017 11:14:48: 2000000 INFO @ Wed, 28 Jun 2017 11:14:48: 2000000 INFO @ Wed, 28 Jun 2017 11:14:56: 3000000 INFO @ Wed, 28 Jun 2017 11:14:56: 3000000 INFO @ Wed, 28 Jun 2017 11:14:56: 3000000 INFO @ Wed, 28 Jun 2017 11:15:03: 4000000 INFO @ Wed, 28 Jun 2017 11:15:03: 4000000 INFO @ Wed, 28 Jun 2017 11:15:03: 4000000 INFO @ Wed, 28 Jun 2017 11:15:10: 5000000 INFO @ Wed, 28 Jun 2017 11:15:10: 5000000 INFO @ Wed, 28 Jun 2017 11:15:10: 5000000 INFO @ Wed, 28 Jun 2017 11:15:18: 6000000 INFO @ Wed, 28 Jun 2017 11:15:18: 6000000 INFO @ Wed, 28 Jun 2017 11:15:18: 6000000 INFO @ Wed, 28 Jun 2017 11:15:26: 7000000 INFO @ Wed, 28 Jun 2017 11:15:26: 7000000 INFO @ Wed, 28 Jun 2017 11:15:27: 7000000 INFO @ Wed, 28 Jun 2017 11:15:34: 8000000 INFO @ Wed, 28 Jun 2017 11:15:34: 8000000 INFO @ Wed, 28 Jun 2017 11:15:36: 8000000 INFO @ Wed, 28 Jun 2017 11:15:42: 9000000 INFO @ Wed, 28 Jun 2017 11:15:42: 9000000 INFO @ Wed, 28 Jun 2017 11:15:45: 9000000 INFO @ Wed, 28 Jun 2017 11:15:51: 10000000 INFO @ Wed, 28 Jun 2017 11:15:51: 10000000 INFO @ Wed, 28 Jun 2017 11:15:53: 10000000 INFO @ Wed, 28 Jun 2017 11:15:59: 11000000 INFO @ Wed, 28 Jun 2017 11:15:59: 11000000 INFO @ Wed, 28 Jun 2017 11:16:02: 11000000 INFO @ Wed, 28 Jun 2017 11:16:05: #1 tag size is determined as 50 bps INFO @ Wed, 28 Jun 2017 11:16:05: #1 tag size = 50 INFO @ Wed, 28 Jun 2017 11:16:05: #1 total tags in treatment: 11830723 INFO @ Wed, 28 Jun 2017 11:16:05: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 11:16:05: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 11:16:05: #1 tag size is determined as 50 bps INFO @ Wed, 28 Jun 2017 11:16:05: #1 tag size = 50 INFO @ Wed, 28 Jun 2017 11:16:05: #1 total tags in treatment: 11830723 INFO @ Wed, 28 Jun 2017 11:16:05: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 11:16:05: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 11:16:06: #1 tags after filtering in treatment: 11830723 INFO @ Wed, 28 Jun 2017 11:16:06: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 11:16:06: #1 finished! INFO @ Wed, 28 Jun 2017 11:16:06: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 11:16:06: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 11:16:06: #1 tags after filtering in treatment: 11830723 INFO @ Wed, 28 Jun 2017 11:16:06: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 11:16:06: #1 finished! INFO @ Wed, 28 Jun 2017 11:16:06: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 11:16:06: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 11:16:06: #2 number of paired peaks: 0 WARNING @ Wed, 28 Jun 2017 11:16:06: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 11:16:06: Process for pairing-model is terminated! cat: SRX964234.10_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX964234.10_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX964234.10_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX964234.10_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Wed, 28 Jun 2017 11:16:07: #2 number of paired peaks: 0 WARNING @ Wed, 28 Jun 2017 11:16:07: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 11:16:07: Process for pairing-model is terminated! cat: SRX964234.20_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX964234.20_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX964234.20_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX964234.20_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Wed, 28 Jun 2017 11:16:09: #1 tag size is determined as 50 bps INFO @ Wed, 28 Jun 2017 11:16:09: #1 tag size = 50 INFO @ Wed, 28 Jun 2017 11:16:09: #1 total tags in treatment: 11830723 INFO @ Wed, 28 Jun 2017 11:16:09: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 11:16:09: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 11:16:09: #1 tags after filtering in treatment: 11830723 INFO @ Wed, 28 Jun 2017 11:16:09: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 11:16:09: #1 finished! INFO @ Wed, 28 Jun 2017 11:16:09: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 11:16:09: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 11:16:10: #2 number of paired peaks: 0 WARNING @ Wed, 28 Jun 2017 11:16:10: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 11:16:10: Process for pairing-model is terminated! cat: SRX964234.05_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX964234.05_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX964234.05_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX964234.05_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。