Job ID = 14521331 SRX = SRX9278497 Genome = sacCer3 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... Read 1883623 spots for SRR12809895/SRR12809895.sra Written 1883623 spots for SRR12809895/SRR12809895.sra fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:00:57 1883623 reads; of these: 1883623 (100.00%) were unpaired; of these: 43615 (2.32%) aligned 0 times 1626994 (86.38%) aligned exactly 1 time 213014 (11.31%) aligned >1 times 97.68% overall alignment rate Time searching: 00:00:57 Overall time: 00:00:57 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdupse_core] 220518 / 1840008 = 0.1198 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 15 Jan 2022 20:52:50: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Jan 2022 20:52:50: #1 read tag files... INFO @ Sat, 15 Jan 2022 20:52:50: #1 read treatment tags... INFO @ Sat, 15 Jan 2022 20:53:01: 1000000 INFO @ Sat, 15 Jan 2022 20:53:08: #1 tag size is determined as 140 bps INFO @ Sat, 15 Jan 2022 20:53:08: #1 tag size = 140 INFO @ Sat, 15 Jan 2022 20:53:08: #1 total tags in treatment: 1619490 INFO @ Sat, 15 Jan 2022 20:53:08: #1 user defined the maximum tags... INFO @ Sat, 15 Jan 2022 20:53:08: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Jan 2022 20:53:08: #1 tags after filtering in treatment: 1619490 INFO @ Sat, 15 Jan 2022 20:53:08: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 15 Jan 2022 20:53:08: #1 finished! INFO @ Sat, 15 Jan 2022 20:53:08: #2 Build Peak Model... INFO @ Sat, 15 Jan 2022 20:53:08: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Jan 2022 20:53:08: #2 number of paired peaks: 69 WARNING @ Sat, 15 Jan 2022 20:53:08: Too few paired peaks (69) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Jan 2022 20:53:08: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 15 Jan 2022 20:53:21: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Jan 2022 20:53:21: #1 read tag files... INFO @ Sat, 15 Jan 2022 20:53:21: #1 read treatment tags... INFO @ Sat, 15 Jan 2022 20:53:29: 1000000 INFO @ Sat, 15 Jan 2022 20:53:33: #1 tag size is determined as 140 bps INFO @ Sat, 15 Jan 2022 20:53:33: #1 tag size = 140 INFO @ Sat, 15 Jan 2022 20:53:33: #1 total tags in treatment: 1619490 INFO @ Sat, 15 Jan 2022 20:53:33: #1 user defined the maximum tags... INFO @ Sat, 15 Jan 2022 20:53:33: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Jan 2022 20:53:34: #1 tags after filtering in treatment: 1619490 INFO @ Sat, 15 Jan 2022 20:53:34: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 15 Jan 2022 20:53:34: #1 finished! INFO @ Sat, 15 Jan 2022 20:53:34: #2 Build Peak Model... INFO @ Sat, 15 Jan 2022 20:53:34: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Jan 2022 20:53:34: #2 number of paired peaks: 69 WARNING @ Sat, 15 Jan 2022 20:53:34: Too few paired peaks (69) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Jan 2022 20:53:34: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 15 Jan 2022 20:53:51: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Jan 2022 20:53:51: #1 read tag files... INFO @ Sat, 15 Jan 2022 20:53:51: #1 read treatment tags... BedGraph に変換しました。 BigWig に変換中... INFO @ Sat, 15 Jan 2022 20:54:01: 1000000 BigWig に変換しました。 INFO @ Sat, 15 Jan 2022 20:54:08: #1 tag size is determined as 140 bps INFO @ Sat, 15 Jan 2022 20:54:08: #1 tag size = 140 INFO @ Sat, 15 Jan 2022 20:54:08: #1 total tags in treatment: 1619490 INFO @ Sat, 15 Jan 2022 20:54:08: #1 user defined the maximum tags... INFO @ Sat, 15 Jan 2022 20:54:08: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Jan 2022 20:54:08: #1 tags after filtering in treatment: 1619490 INFO @ Sat, 15 Jan 2022 20:54:08: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 15 Jan 2022 20:54:08: #1 finished! INFO @ Sat, 15 Jan 2022 20:54:08: #2 Build Peak Model... INFO @ Sat, 15 Jan 2022 20:54:08: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Jan 2022 20:54:08: #2 number of paired peaks: 69 WARNING @ Sat, 15 Jan 2022 20:54:08: Too few paired peaks (69) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Jan 2022 20:54:08: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278497/SRX9278497.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling