Job ID = 14521328 SRX = SRX9278494 Genome = sacCer3 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... Read 1878730 spots for SRR12809892/SRR12809892.sra Written 1878730 spots for SRR12809892/SRR12809892.sra fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:00:47 1878730 reads; of these: 1878730 (100.00%) were unpaired; of these: 52831 (2.81%) aligned 0 times 1609465 (85.67%) aligned exactly 1 time 216434 (11.52%) aligned >1 times 97.19% overall alignment rate Time searching: 00:00:47 Overall time: 00:00:47 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdupse_core] 185261 / 1825899 = 0.1015 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 15 Jan 2022 20:52:16: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Jan 2022 20:52:16: #1 read tag files... INFO @ Sat, 15 Jan 2022 20:52:16: #1 read treatment tags... INFO @ Sat, 15 Jan 2022 20:52:26: 1000000 INFO @ Sat, 15 Jan 2022 20:52:32: #1 tag size is determined as 148 bps INFO @ Sat, 15 Jan 2022 20:52:32: #1 tag size = 148 INFO @ Sat, 15 Jan 2022 20:52:32: #1 total tags in treatment: 1640638 INFO @ Sat, 15 Jan 2022 20:52:32: #1 user defined the maximum tags... INFO @ Sat, 15 Jan 2022 20:52:32: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Jan 2022 20:52:32: #1 tags after filtering in treatment: 1640638 INFO @ Sat, 15 Jan 2022 20:52:32: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 15 Jan 2022 20:52:32: #1 finished! INFO @ Sat, 15 Jan 2022 20:52:32: #2 Build Peak Model... INFO @ Sat, 15 Jan 2022 20:52:32: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Jan 2022 20:52:32: #2 number of paired peaks: 57 WARNING @ Sat, 15 Jan 2022 20:52:32: Too few paired peaks (57) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Jan 2022 20:52:32: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 15 Jan 2022 20:52:46: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Jan 2022 20:52:46: #1 read tag files... INFO @ Sat, 15 Jan 2022 20:52:46: #1 read treatment tags... INFO @ Sat, 15 Jan 2022 20:52:54: 1000000 INFO @ Sat, 15 Jan 2022 20:53:00: #1 tag size is determined as 148 bps INFO @ Sat, 15 Jan 2022 20:53:00: #1 tag size = 148 INFO @ Sat, 15 Jan 2022 20:53:00: #1 total tags in treatment: 1640638 INFO @ Sat, 15 Jan 2022 20:53:00: #1 user defined the maximum tags... INFO @ Sat, 15 Jan 2022 20:53:00: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Jan 2022 20:53:00: #1 tags after filtering in treatment: 1640638 INFO @ Sat, 15 Jan 2022 20:53:00: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 15 Jan 2022 20:53:00: #1 finished! INFO @ Sat, 15 Jan 2022 20:53:00: #2 Build Peak Model... INFO @ Sat, 15 Jan 2022 20:53:00: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Jan 2022 20:53:00: #2 number of paired peaks: 57 WARNING @ Sat, 15 Jan 2022 20:53:00: Too few paired peaks (57) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Jan 2022 20:53:00: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 15 Jan 2022 20:53:16: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Jan 2022 20:53:16: #1 read tag files... INFO @ Sat, 15 Jan 2022 20:53:16: #1 read treatment tags... INFO @ Sat, 15 Jan 2022 20:53:24: 1000000 BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。 INFO @ Sat, 15 Jan 2022 20:53:30: #1 tag size is determined as 148 bps INFO @ Sat, 15 Jan 2022 20:53:30: #1 tag size = 148 INFO @ Sat, 15 Jan 2022 20:53:30: #1 total tags in treatment: 1640638 INFO @ Sat, 15 Jan 2022 20:53:30: #1 user defined the maximum tags... INFO @ Sat, 15 Jan 2022 20:53:30: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Jan 2022 20:53:30: #1 tags after filtering in treatment: 1640638 INFO @ Sat, 15 Jan 2022 20:53:30: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 15 Jan 2022 20:53:30: #1 finished! INFO @ Sat, 15 Jan 2022 20:53:30: #2 Build Peak Model... INFO @ Sat, 15 Jan 2022 20:53:30: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Jan 2022 20:53:30: #2 number of paired peaks: 57 WARNING @ Sat, 15 Jan 2022 20:53:30: Too few paired peaks (57) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Jan 2022 20:53:30: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX9278494/SRX9278494.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling