Job ID = 4289535 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... spots read : 7,682,046 reads read : 7,682,046 reads written : 7,682,046 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:01:21 7682046 reads; of these: 7682046 (100.00%) were unpaired; of these: 563064 (7.33%) aligned 0 times 6682123 (86.98%) aligned exactly 1 time 436859 (5.69%) aligned >1 times 92.67% overall alignment rate Time searching: 00:01:21 Overall time: 00:01:21 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdupse_core] 4807051 / 7118982 = 0.6752 in library ' ' BAM に変換しました。 Bed ファイルを作成中... INFO @ Tue, 10 Dec 2019 14:46:19: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 10 Dec 2019 14:46:19: #1 read tag files... INFO @ Tue, 10 Dec 2019 14:46:19: #1 read treatment tags... INFO @ Tue, 10 Dec 2019 14:46:27: 1000000 INFO @ Tue, 10 Dec 2019 14:46:34: 2000000 INFO @ Tue, 10 Dec 2019 14:46:36: #1 tag size is determined as 41 bps INFO @ Tue, 10 Dec 2019 14:46:36: #1 tag size = 41 INFO @ Tue, 10 Dec 2019 14:46:36: #1 total tags in treatment: 2311931 INFO @ Tue, 10 Dec 2019 14:46:36: #1 user defined the maximum tags... INFO @ Tue, 10 Dec 2019 14:46:36: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 10 Dec 2019 14:46:36: #1 tags after filtering in treatment: 2311931 INFO @ Tue, 10 Dec 2019 14:46:36: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 10 Dec 2019 14:46:36: #1 finished! INFO @ Tue, 10 Dec 2019 14:46:36: #2 Build Peak Model... INFO @ Tue, 10 Dec 2019 14:46:36: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 10 Dec 2019 14:46:36: #2 number of paired peaks: 34 WARNING @ Tue, 10 Dec 2019 14:46:36: Too few paired peaks (34) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Tue, 10 Dec 2019 14:46:36: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling INFO @ Tue, 10 Dec 2019 14:46:49: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 10 Dec 2019 14:46:49: #1 read tag files... INFO @ Tue, 10 Dec 2019 14:46:49: #1 read treatment tags... INFO @ Tue, 10 Dec 2019 14:46:59: 1000000 INFO @ Tue, 10 Dec 2019 14:47:08: 2000000 INFO @ Tue, 10 Dec 2019 14:47:11: #1 tag size is determined as 41 bps INFO @ Tue, 10 Dec 2019 14:47:11: #1 tag size = 41 INFO @ Tue, 10 Dec 2019 14:47:11: #1 total tags in treatment: 2311931 INFO @ Tue, 10 Dec 2019 14:47:11: #1 user defined the maximum tags... INFO @ Tue, 10 Dec 2019 14:47:11: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 10 Dec 2019 14:47:11: #1 tags after filtering in treatment: 2311931 INFO @ Tue, 10 Dec 2019 14:47:11: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 10 Dec 2019 14:47:11: #1 finished! INFO @ Tue, 10 Dec 2019 14:47:11: #2 Build Peak Model... INFO @ Tue, 10 Dec 2019 14:47:11: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 10 Dec 2019 14:47:11: #2 number of paired peaks: 34 WARNING @ Tue, 10 Dec 2019 14:47:11: Too few paired peaks (34) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Tue, 10 Dec 2019 14:47:11: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換中... INFO @ Tue, 10 Dec 2019 14:47:19: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 10 Dec 2019 14:47:19: #1 read tag files... INFO @ Tue, 10 Dec 2019 14:47:19: #1 read treatment tags... INFO @ Tue, 10 Dec 2019 14:47:27: 1000000 INFO @ Tue, 10 Dec 2019 14:47:34: 2000000 INFO @ Tue, 10 Dec 2019 14:47:37: #1 tag size is determined as 41 bps INFO @ Tue, 10 Dec 2019 14:47:37: #1 tag size = 41 INFO @ Tue, 10 Dec 2019 14:47:37: #1 total tags in treatment: 2311931 INFO @ Tue, 10 Dec 2019 14:47:37: #1 user defined the maximum tags... INFO @ Tue, 10 Dec 2019 14:47:37: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 10 Dec 2019 14:47:37: #1 tags after filtering in treatment: 2311931 INFO @ Tue, 10 Dec 2019 14:47:37: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 10 Dec 2019 14:47:37: #1 finished! INFO @ Tue, 10 Dec 2019 14:47:37: #2 Build Peak Model... INFO @ Tue, 10 Dec 2019 14:47:37: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 10 Dec 2019 14:47:37: #2 number of paired peaks: 34 WARNING @ Tue, 10 Dec 2019 14:47:37: Too few paired peaks (34) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Tue, 10 Dec 2019 14:47:37: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX6932534/SRX6932534.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。