Job ID = 7099327 SRX = SRX6911502 Genome = sacCer3 sra ファイルのダウンロード中... Read layout: PAIRED fastq に変換中... Read 4563647 spots for SRR10191129/SRR10191129.sra Written 4563647 spots for SRR10191129/SRR10191129.sra fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:02:54 4563647 reads; of these: 4563647 (100.00%) were paired; of these: 3656800 (80.13%) aligned concordantly 0 times 551933 (12.09%) aligned concordantly exactly 1 time 354914 (7.78%) aligned concordantly >1 times ---- 3656800 pairs aligned concordantly 0 times; of these: 205574 (5.62%) aligned discordantly 1 time ---- 3451226 pairs aligned 0 times concordantly or discordantly; of these: 6902452 mates make up the pairs; of these: 6274794 (90.91%) aligned 0 times 139253 (2.02%) aligned exactly 1 time 488405 (7.08%) aligned >1 times 31.25% overall alignment rate Time searching: 00:02:54 Overall time: 00:02:54 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 609078 / 1111648 = 0.5479 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Wed, 22 Jul 2020 12:07:03: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 22 Jul 2020 12:07:03: #1 read tag files... INFO @ Wed, 22 Jul 2020 12:07:03: #1 read treatment tags... INFO @ Wed, 22 Jul 2020 12:07:08: 1000000 INFO @ Wed, 22 Jul 2020 12:07:12: #1 tag size is determined as 101 bps INFO @ Wed, 22 Jul 2020 12:07:12: #1 tag size = 101 INFO @ Wed, 22 Jul 2020 12:07:12: #1 total tags in treatment: 406889 INFO @ Wed, 22 Jul 2020 12:07:12: #1 user defined the maximum tags... INFO @ Wed, 22 Jul 2020 12:07:12: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 22 Jul 2020 12:07:12: #1 tags after filtering in treatment: 220108 INFO @ Wed, 22 Jul 2020 12:07:12: #1 Redundant rate of treatment: 0.46 INFO @ Wed, 22 Jul 2020 12:07:12: #1 finished! INFO @ Wed, 22 Jul 2020 12:07:12: #2 Build Peak Model... INFO @ Wed, 22 Jul 2020 12:07:12: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 22 Jul 2020 12:07:12: #2 number of paired peaks: 445 WARNING @ Wed, 22 Jul 2020 12:07:12: Fewer paired peaks (445) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 445 pairs to build model! INFO @ Wed, 22 Jul 2020 12:07:12: start model_add_line... INFO @ Wed, 22 Jul 2020 12:07:12: start X-correlation... INFO @ Wed, 22 Jul 2020 12:07:12: end of X-cor INFO @ Wed, 22 Jul 2020 12:07:12: #2 finished! INFO @ Wed, 22 Jul 2020 12:07:12: #2 predicted fragment length is 166 bps INFO @ Wed, 22 Jul 2020 12:07:12: #2 alternative fragment length(s) may be 1,35,58,75,91,128,166,191,220,585 bps INFO @ Wed, 22 Jul 2020 12:07:12: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.05_model.r WARNING @ Wed, 22 Jul 2020 12:07:12: #2 Since the d (166) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Wed, 22 Jul 2020 12:07:12: #2 You may need to consider one of the other alternative d(s): 1,35,58,75,91,128,166,191,220,585 WARNING @ Wed, 22 Jul 2020 12:07:12: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Wed, 22 Jul 2020 12:07:12: #3 Call peaks... INFO @ Wed, 22 Jul 2020 12:07:12: #3 Pre-compute pvalue-qvalue table... INFO @ Wed, 22 Jul 2020 12:07:13: #3 Call peaks for each chromosome... INFO @ Wed, 22 Jul 2020 12:07:13: #4 Write output xls file... /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.05_peaks.xls INFO @ Wed, 22 Jul 2020 12:07:13: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.05_peaks.narrowPeak INFO @ Wed, 22 Jul 2020 12:07:13: #4 Write summits bed file... /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.05_summits.bed INFO @ Wed, 22 Jul 2020 12:07:13: Done! pass1 - making usageList (17 chroms): 0 millis pass2 - checking and writing primary data (300 records, 4 fields): 3 millis CompletedMACS2peakCalling WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Wed, 22 Jul 2020 12:07:32: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 22 Jul 2020 12:07:32: #1 read tag files... INFO @ Wed, 22 Jul 2020 12:07:32: #1 read treatment tags... INFO @ Wed, 22 Jul 2020 12:07:38: 1000000 INFO @ Wed, 22 Jul 2020 12:07:41: #1 tag size is determined as 101 bps INFO @ Wed, 22 Jul 2020 12:07:41: #1 tag size = 101 INFO @ Wed, 22 Jul 2020 12:07:41: #1 total tags in treatment: 406889 INFO @ Wed, 22 Jul 2020 12:07:41: #1 user defined the maximum tags... INFO @ Wed, 22 Jul 2020 12:07:41: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 22 Jul 2020 12:07:41: #1 tags after filtering in treatment: 220108 INFO @ Wed, 22 Jul 2020 12:07:41: #1 Redundant rate of treatment: 0.46 INFO @ Wed, 22 Jul 2020 12:07:41: #1 finished! INFO @ Wed, 22 Jul 2020 12:07:41: #2 Build Peak Model... INFO @ Wed, 22 Jul 2020 12:07:41: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 22 Jul 2020 12:07:41: #2 number of paired peaks: 445 WARNING @ Wed, 22 Jul 2020 12:07:41: Fewer paired peaks (445) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 445 pairs to build model! INFO @ Wed, 22 Jul 2020 12:07:41: start model_add_line... INFO @ Wed, 22 Jul 2020 12:07:41: start X-correlation... INFO @ Wed, 22 Jul 2020 12:07:41: end of X-cor INFO @ Wed, 22 Jul 2020 12:07:41: #2 finished! INFO @ Wed, 22 Jul 2020 12:07:41: #2 predicted fragment length is 166 bps INFO @ Wed, 22 Jul 2020 12:07:41: #2 alternative fragment length(s) may be 1,35,58,75,91,128,166,191,220,585 bps INFO @ Wed, 22 Jul 2020 12:07:41: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.10_model.r WARNING @ Wed, 22 Jul 2020 12:07:41: #2 Since the d (166) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Wed, 22 Jul 2020 12:07:41: #2 You may need to consider one of the other alternative d(s): 1,35,58,75,91,128,166,191,220,585 WARNING @ Wed, 22 Jul 2020 12:07:41: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Wed, 22 Jul 2020 12:07:41: #3 Call peaks... INFO @ Wed, 22 Jul 2020 12:07:41: #3 Pre-compute pvalue-qvalue table... INFO @ Wed, 22 Jul 2020 12:07:42: #3 Call peaks for each chromosome... INFO @ Wed, 22 Jul 2020 12:07:42: #4 Write output xls file... /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.10_peaks.xls INFO @ Wed, 22 Jul 2020 12:07:42: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.10_peaks.narrowPeak INFO @ Wed, 22 Jul 2020 12:07:42: #4 Write summits bed file... /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.10_summits.bed INFO @ Wed, 22 Jul 2020 12:07:42: Done! pass1 - making usageList (17 chroms): 0 millis pass2 - checking and writing primary data (223 records, 4 fields): 2 millis CompletedMACS2peakCalling BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Wed, 22 Jul 2020 12:08:02: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 22 Jul 2020 12:08:02: #1 read tag files... INFO @ Wed, 22 Jul 2020 12:08:02: #1 read treatment tags... BedGraph に変換しました。 BigWig に変換中... INFO @ Wed, 22 Jul 2020 12:08:08: 1000000 BigWig に変換しました。 INFO @ Wed, 22 Jul 2020 12:08:12: #1 tag size is determined as 101 bps INFO @ Wed, 22 Jul 2020 12:08:12: #1 tag size = 101 INFO @ Wed, 22 Jul 2020 12:08:12: #1 total tags in treatment: 406889 INFO @ Wed, 22 Jul 2020 12:08:12: #1 user defined the maximum tags... INFO @ Wed, 22 Jul 2020 12:08:12: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 22 Jul 2020 12:08:12: #1 tags after filtering in treatment: 220108 INFO @ Wed, 22 Jul 2020 12:08:12: #1 Redundant rate of treatment: 0.46 INFO @ Wed, 22 Jul 2020 12:08:12: #1 finished! INFO @ Wed, 22 Jul 2020 12:08:12: #2 Build Peak Model... INFO @ Wed, 22 Jul 2020 12:08:12: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 22 Jul 2020 12:08:12: #2 number of paired peaks: 445 WARNING @ Wed, 22 Jul 2020 12:08:12: Fewer paired peaks (445) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 445 pairs to build model! INFO @ Wed, 22 Jul 2020 12:08:12: start model_add_line... INFO @ Wed, 22 Jul 2020 12:08:12: start X-correlation... INFO @ Wed, 22 Jul 2020 12:08:12: end of X-cor INFO @ Wed, 22 Jul 2020 12:08:12: #2 finished! INFO @ Wed, 22 Jul 2020 12:08:12: #2 predicted fragment length is 166 bps INFO @ Wed, 22 Jul 2020 12:08:12: #2 alternative fragment length(s) may be 1,35,58,75,91,128,166,191,220,585 bps INFO @ Wed, 22 Jul 2020 12:08:12: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.20_model.r WARNING @ Wed, 22 Jul 2020 12:08:12: #2 Since the d (166) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Wed, 22 Jul 2020 12:08:12: #2 You may need to consider one of the other alternative d(s): 1,35,58,75,91,128,166,191,220,585 WARNING @ Wed, 22 Jul 2020 12:08:12: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Wed, 22 Jul 2020 12:08:12: #3 Call peaks... INFO @ Wed, 22 Jul 2020 12:08:12: #3 Pre-compute pvalue-qvalue table... INFO @ Wed, 22 Jul 2020 12:08:13: #3 Call peaks for each chromosome... INFO @ Wed, 22 Jul 2020 12:08:13: #4 Write output xls file... /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.20_peaks.xls INFO @ Wed, 22 Jul 2020 12:08:13: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.20_peaks.narrowPeak INFO @ Wed, 22 Jul 2020 12:08:13: #4 Write summits bed file... /home/okishinya/chipatlas/results/sacCer3/SRX6911502/SRX6911502.20_summits.bed INFO @ Wed, 22 Jul 2020 12:08:13: Done! pass1 - making usageList (17 chroms): 0 millis pass2 - checking and writing primary data (145 records, 4 fields): 2 millis CompletedMACS2peakCalling