Job ID = 5791031 sra ファイルのダウンロード中... Read layout: PAIRED fastq に変換中... spots read : 3,385,079 reads read : 6,770,158 reads written : 6,770,158 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:01:23 3385079 reads; of these: 3385079 (100.00%) were paired; of these: 2171040 (64.14%) aligned concordantly 0 times 1082439 (31.98%) aligned concordantly exactly 1 time 131600 (3.89%) aligned concordantly >1 times ---- 2171040 pairs aligned concordantly 0 times; of these: 422 (0.02%) aligned discordantly 1 time ---- 2170618 pairs aligned 0 times concordantly or discordantly; of these: 4341236 mates make up the pairs; of these: 2266492 (52.21%) aligned 0 times 1827524 (42.10%) aligned exactly 1 time 247220 (5.69%) aligned >1 times 66.52% overall alignment rate Time searching: 00:01:23 Overall time: 00:01:23 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 6310 / 1209514 = 0.0052 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Wed, 22 Apr 2020 08:24:18: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 22 Apr 2020 08:24:18: #1 read tag files... INFO @ Wed, 22 Apr 2020 08:24:18: #1 read treatment tags... INFO @ Wed, 22 Apr 2020 08:24:24: 1000000 INFO @ Wed, 22 Apr 2020 08:24:30: 2000000 INFO @ Wed, 22 Apr 2020 08:24:35: 3000000 INFO @ Wed, 22 Apr 2020 08:24:41: 4000000 INFO @ Wed, 22 Apr 2020 08:24:44: #1 tag size is determined as 72 bps INFO @ Wed, 22 Apr 2020 08:24:44: #1 tag size = 72 INFO @ Wed, 22 Apr 2020 08:24:44: #1 total tags in treatment: 1207731 INFO @ Wed, 22 Apr 2020 08:24:44: #1 user defined the maximum tags... INFO @ Wed, 22 Apr 2020 08:24:44: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 22 Apr 2020 08:24:44: #1 tags after filtering in treatment: 1157416 INFO @ Wed, 22 Apr 2020 08:24:44: #1 Redundant rate of treatment: 0.04 INFO @ Wed, 22 Apr 2020 08:24:44: #1 finished! INFO @ Wed, 22 Apr 2020 08:24:44: #2 Build Peak Model... INFO @ Wed, 22 Apr 2020 08:24:44: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 22 Apr 2020 08:24:44: #2 number of paired peaks: 37 WARNING @ Wed, 22 Apr 2020 08:24:44: Too few paired peaks (37) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 22 Apr 2020 08:24:44: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Wed, 22 Apr 2020 08:24:48: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 22 Apr 2020 08:24:48: #1 read tag files... INFO @ Wed, 22 Apr 2020 08:24:48: #1 read treatment tags... INFO @ Wed, 22 Apr 2020 08:24:54: 1000000 INFO @ Wed, 22 Apr 2020 08:24:59: 2000000 INFO @ Wed, 22 Apr 2020 08:25:05: 3000000 INFO @ Wed, 22 Apr 2020 08:25:10: 4000000 INFO @ Wed, 22 Apr 2020 08:25:13: #1 tag size is determined as 72 bps INFO @ Wed, 22 Apr 2020 08:25:13: #1 tag size = 72 INFO @ Wed, 22 Apr 2020 08:25:13: #1 total tags in treatment: 1207731 INFO @ Wed, 22 Apr 2020 08:25:13: #1 user defined the maximum tags... INFO @ Wed, 22 Apr 2020 08:25:13: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 22 Apr 2020 08:25:13: #1 tags after filtering in treatment: 1157416 INFO @ Wed, 22 Apr 2020 08:25:13: #1 Redundant rate of treatment: 0.04 INFO @ Wed, 22 Apr 2020 08:25:13: #1 finished! INFO @ Wed, 22 Apr 2020 08:25:13: #2 Build Peak Model... INFO @ Wed, 22 Apr 2020 08:25:13: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 22 Apr 2020 08:25:13: #2 number of paired peaks: 37 WARNING @ Wed, 22 Apr 2020 08:25:13: Too few paired peaks (37) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 22 Apr 2020 08:25:13: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Wed, 22 Apr 2020 08:25:18: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 22 Apr 2020 08:25:18: #1 read tag files... INFO @ Wed, 22 Apr 2020 08:25:18: #1 read treatment tags... INFO @ Wed, 22 Apr 2020 08:25:24: 1000000 INFO @ Wed, 22 Apr 2020 08:25:29: 2000000 INFO @ Wed, 22 Apr 2020 08:25:35: 3000000 INFO @ Wed, 22 Apr 2020 08:25:41: 4000000 INFO @ Wed, 22 Apr 2020 08:25:43: #1 tag size is determined as 72 bps INFO @ Wed, 22 Apr 2020 08:25:43: #1 tag size = 72 INFO @ Wed, 22 Apr 2020 08:25:43: #1 total tags in treatment: 1207731 INFO @ Wed, 22 Apr 2020 08:25:43: #1 user defined the maximum tags... INFO @ Wed, 22 Apr 2020 08:25:43: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 22 Apr 2020 08:25:43: #1 tags after filtering in treatment: 1157416 INFO @ Wed, 22 Apr 2020 08:25:43: #1 Redundant rate of treatment: 0.04 INFO @ Wed, 22 Apr 2020 08:25:43: #1 finished! INFO @ Wed, 22 Apr 2020 08:25:43: #2 Build Peak Model... INFO @ Wed, 22 Apr 2020 08:25:43: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 22 Apr 2020 08:25:43: #2 number of paired peaks: 37 WARNING @ Wed, 22 Apr 2020 08:25:43: Too few paired peaks (37) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 22 Apr 2020 08:25:43: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 0 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5874527/SRX5874527.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。