Job ID = 2641232 sra ファイルのダウンロード中... Read layout: PAIRED fastq に変換中... spots read : 3,206,529 reads read : 6,413,058 reads written : 6,413,058 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:01:35 3206529 reads; of these: 3206529 (100.00%) were paired; of these: 1625964 (50.71%) aligned concordantly 0 times 1330813 (41.50%) aligned concordantly exactly 1 time 249752 (7.79%) aligned concordantly >1 times ---- 1625964 pairs aligned concordantly 0 times; of these: 144003 (8.86%) aligned discordantly 1 time ---- 1481961 pairs aligned 0 times concordantly or discordantly; of these: 2963922 mates make up the pairs; of these: 2527121 (85.26%) aligned 0 times 336812 (11.36%) aligned exactly 1 time 99989 (3.37%) aligned >1 times 60.59% overall alignment rate Time searching: 00:01:35 Overall time: 00:01:35 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 191702 / 1706266 = 0.1124 in library ' ' BAM に変換しました。 Bed ファイルを作成中... INFO @ Sat, 24 Aug 2019 22:07:15: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 24 Aug 2019 22:07:15: #1 read tag files... INFO @ Sat, 24 Aug 2019 22:07:15: #1 read treatment tags... INFO @ Sat, 24 Aug 2019 22:07:23: 1000000 INFO @ Sat, 24 Aug 2019 22:07:32: 2000000 INFO @ Sat, 24 Aug 2019 22:07:40: 3000000 INFO @ Sat, 24 Aug 2019 22:07:44: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 24 Aug 2019 22:07:44: #1 read tag files... INFO @ Sat, 24 Aug 2019 22:07:44: #1 read treatment tags... INFO @ Sat, 24 Aug 2019 22:07:45: #1 tag size is determined as 44 bps INFO @ Sat, 24 Aug 2019 22:07:45: #1 tag size = 44 INFO @ Sat, 24 Aug 2019 22:07:45: #1 total tags in treatment: 1432405 INFO @ Sat, 24 Aug 2019 22:07:45: #1 user defined the maximum tags... INFO @ Sat, 24 Aug 2019 22:07:45: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 24 Aug 2019 22:07:45: #1 tags after filtering in treatment: 1228662 INFO @ Sat, 24 Aug 2019 22:07:45: #1 Redundant rate of treatment: 0.14 INFO @ Sat, 24 Aug 2019 22:07:45: #1 finished! INFO @ Sat, 24 Aug 2019 22:07:45: #2 Build Peak Model... INFO @ Sat, 24 Aug 2019 22:07:45: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 24 Aug 2019 22:07:45: #2 number of paired peaks: 82 WARNING @ Sat, 24 Aug 2019 22:07:45: Too few paired peaks (82) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 24 Aug 2019 22:07:45: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling INFO @ Sat, 24 Aug 2019 22:07:52: 1000000 INFO @ Sat, 24 Aug 2019 22:08:00: 2000000 INFO @ Sat, 24 Aug 2019 22:08:08: 3000000 INFO @ Sat, 24 Aug 2019 22:08:11: #1 tag size is determined as 44 bps INFO @ Sat, 24 Aug 2019 22:08:11: #1 tag size = 44 INFO @ Sat, 24 Aug 2019 22:08:11: #1 total tags in treatment: 1432405 INFO @ Sat, 24 Aug 2019 22:08:11: #1 user defined the maximum tags... INFO @ Sat, 24 Aug 2019 22:08:11: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 24 Aug 2019 22:08:11: #1 tags after filtering in treatment: 1228662 INFO @ Sat, 24 Aug 2019 22:08:11: #1 Redundant rate of treatment: 0.14 INFO @ Sat, 24 Aug 2019 22:08:11: #1 finished! INFO @ Sat, 24 Aug 2019 22:08:11: #2 Build Peak Model... INFO @ Sat, 24 Aug 2019 22:08:11: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 24 Aug 2019 22:08:11: #2 number of paired peaks: 82 WARNING @ Sat, 24 Aug 2019 22:08:11: Too few paired peaks (82) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 24 Aug 2019 22:08:11: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換中... INFO @ Sat, 24 Aug 2019 22:08:15: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 24 Aug 2019 22:08:15: #1 read tag files... INFO @ Sat, 24 Aug 2019 22:08:15: #1 read treatment tags... INFO @ Sat, 24 Aug 2019 22:08:21: 1000000 INFO @ Sat, 24 Aug 2019 22:08:28: 2000000 INFO @ Sat, 24 Aug 2019 22:08:34: 3000000 INFO @ Sat, 24 Aug 2019 22:08:37: #1 tag size is determined as 44 bps INFO @ Sat, 24 Aug 2019 22:08:37: #1 tag size = 44 INFO @ Sat, 24 Aug 2019 22:08:37: #1 total tags in treatment: 1432405 INFO @ Sat, 24 Aug 2019 22:08:37: #1 user defined the maximum tags... INFO @ Sat, 24 Aug 2019 22:08:37: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 24 Aug 2019 22:08:37: #1 tags after filtering in treatment: 1228662 INFO @ Sat, 24 Aug 2019 22:08:37: #1 Redundant rate of treatment: 0.14 INFO @ Sat, 24 Aug 2019 22:08:37: #1 finished! INFO @ Sat, 24 Aug 2019 22:08:37: #2 Build Peak Model... INFO @ Sat, 24 Aug 2019 22:08:37: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 24 Aug 2019 22:08:37: #2 number of paired peaks: 82 WARNING @ Sat, 24 Aug 2019 22:08:37: Too few paired peaks (82) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 24 Aug 2019 22:08:37: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 2 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820065/SRX5820065.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。