Job ID = 2641218 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... spots read : 16,621,120 reads read : 16,621,120 reads written : 16,621,120 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:03:16 16621120 reads; of these: 16621120 (100.00%) were unpaired; of these: 3185471 (19.17%) aligned 0 times 11995730 (72.17%) aligned exactly 1 time 1439919 (8.66%) aligned >1 times 80.83% overall alignment rate Time searching: 00:03:16 Overall time: 00:03:16 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_sort_core] merging from 8 files... [bam_rmdupse_core] 10414156 / 13435649 = 0.7751 in library ' ' BAM に変換しました。 Bed ファイルを作成中... INFO @ Sat, 24 Aug 2019 22:00:14: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 24 Aug 2019 22:00:14: #1 read tag files... INFO @ Sat, 24 Aug 2019 22:00:14: #1 read treatment tags... INFO @ Sat, 24 Aug 2019 22:00:24: 1000000 INFO @ Sat, 24 Aug 2019 22:00:34: 2000000 INFO @ Sat, 24 Aug 2019 22:00:43: 3000000 INFO @ Sat, 24 Aug 2019 22:00:43: #1 tag size is determined as 51 bps INFO @ Sat, 24 Aug 2019 22:00:43: #1 tag size = 51 INFO @ Sat, 24 Aug 2019 22:00:43: #1 total tags in treatment: 3021493 INFO @ Sat, 24 Aug 2019 22:00:43: #1 user defined the maximum tags... INFO @ Sat, 24 Aug 2019 22:00:43: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 24 Aug 2019 22:00:43: #1 tags after filtering in treatment: 3021493 INFO @ Sat, 24 Aug 2019 22:00:43: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 24 Aug 2019 22:00:43: #1 finished! INFO @ Sat, 24 Aug 2019 22:00:43: #2 Build Peak Model... INFO @ Sat, 24 Aug 2019 22:00:43: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 24 Aug 2019 22:00:43: #2 number of paired peaks: 39 WARNING @ Sat, 24 Aug 2019 22:00:43: Too few paired peaks (39) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 24 Aug 2019 22:00:43: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling INFO @ Sat, 24 Aug 2019 22:00:44: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 24 Aug 2019 22:00:44: #1 read tag files... INFO @ Sat, 24 Aug 2019 22:00:44: #1 read treatment tags... INFO @ Sat, 24 Aug 2019 22:00:53: 1000000 INFO @ Sat, 24 Aug 2019 22:01:01: 2000000 INFO @ Sat, 24 Aug 2019 22:01:09: 3000000 INFO @ Sat, 24 Aug 2019 22:01:09: #1 tag size is determined as 51 bps INFO @ Sat, 24 Aug 2019 22:01:09: #1 tag size = 51 INFO @ Sat, 24 Aug 2019 22:01:09: #1 total tags in treatment: 3021493 INFO @ Sat, 24 Aug 2019 22:01:09: #1 user defined the maximum tags... INFO @ Sat, 24 Aug 2019 22:01:09: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 24 Aug 2019 22:01:10: #1 tags after filtering in treatment: 3021493 INFO @ Sat, 24 Aug 2019 22:01:10: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 24 Aug 2019 22:01:10: #1 finished! INFO @ Sat, 24 Aug 2019 22:01:10: #2 Build Peak Model... INFO @ Sat, 24 Aug 2019 22:01:10: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 24 Aug 2019 22:01:10: #2 number of paired peaks: 39 WARNING @ Sat, 24 Aug 2019 22:01:10: Too few paired peaks (39) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 24 Aug 2019 22:01:10: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 2 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換中... INFO @ Sat, 24 Aug 2019 22:01:14: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 24 Aug 2019 22:01:14: #1 read tag files... INFO @ Sat, 24 Aug 2019 22:01:14: #1 read treatment tags... INFO @ Sat, 24 Aug 2019 22:01:24: 1000000 INFO @ Sat, 24 Aug 2019 22:01:33: 2000000 INFO @ Sat, 24 Aug 2019 22:01:42: 3000000 INFO @ Sat, 24 Aug 2019 22:01:42: #1 tag size is determined as 51 bps INFO @ Sat, 24 Aug 2019 22:01:42: #1 tag size = 51 INFO @ Sat, 24 Aug 2019 22:01:42: #1 total tags in treatment: 3021493 INFO @ Sat, 24 Aug 2019 22:01:42: #1 user defined the maximum tags... INFO @ Sat, 24 Aug 2019 22:01:42: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 24 Aug 2019 22:01:42: #1 tags after filtering in treatment: 3021493 INFO @ Sat, 24 Aug 2019 22:01:42: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 24 Aug 2019 22:01:42: #1 finished! INFO @ Sat, 24 Aug 2019 22:01:42: #2 Build Peak Model... INFO @ Sat, 24 Aug 2019 22:01:42: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 24 Aug 2019 22:01:42: #2 number of paired peaks: 39 WARNING @ Sat, 24 Aug 2019 22:01:42: Too few paired peaks (39) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 24 Aug 2019 22:01:42: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5820052/SRX5820052.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。