Job ID = 4289088 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... spots read : 13,491,783 reads read : 26,983,566 reads written : 13,491,783 reads 0-length : 13,491,783 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:02:23 13491783 reads; of these: 13491783 (100.00%) were unpaired; of these: 9050203 (67.08%) aligned 0 times 2691429 (19.95%) aligned exactly 1 time 1750151 (12.97%) aligned >1 times 32.92% overall alignment rate Time searching: 00:02:23 Overall time: 00:02:23 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdupse_core] 2896267 / 4441580 = 0.6521 in library ' ' BAM に変換しました。 Bed ファイルを作成中... INFO @ Tue, 10 Dec 2019 13:36:58: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 10 Dec 2019 13:36:58: #1 read tag files... INFO @ Tue, 10 Dec 2019 13:36:58: #1 read treatment tags... INFO @ Tue, 10 Dec 2019 13:37:06: 1000000 INFO @ Tue, 10 Dec 2019 13:37:10: #1 tag size is determined as 101 bps INFO @ Tue, 10 Dec 2019 13:37:10: #1 tag size = 101 INFO @ Tue, 10 Dec 2019 13:37:10: #1 total tags in treatment: 1545313 INFO @ Tue, 10 Dec 2019 13:37:10: #1 user defined the maximum tags... INFO @ Tue, 10 Dec 2019 13:37:10: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 10 Dec 2019 13:37:10: #1 tags after filtering in treatment: 1545313 INFO @ Tue, 10 Dec 2019 13:37:10: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 10 Dec 2019 13:37:10: #1 finished! INFO @ Tue, 10 Dec 2019 13:37:10: #2 Build Peak Model... INFO @ Tue, 10 Dec 2019 13:37:10: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 10 Dec 2019 13:37:10: #2 number of paired peaks: 91 WARNING @ Tue, 10 Dec 2019 13:37:10: Too few paired peaks (91) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Tue, 10 Dec 2019 13:37:10: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling INFO @ Tue, 10 Dec 2019 13:37:28: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 10 Dec 2019 13:37:28: #1 read tag files... INFO @ Tue, 10 Dec 2019 13:37:28: #1 read treatment tags... INFO @ Tue, 10 Dec 2019 13:37:39: 1000000 INFO @ Tue, 10 Dec 2019 13:37:45: #1 tag size is determined as 101 bps INFO @ Tue, 10 Dec 2019 13:37:45: #1 tag size = 101 INFO @ Tue, 10 Dec 2019 13:37:45: #1 total tags in treatment: 1545313 INFO @ Tue, 10 Dec 2019 13:37:45: #1 user defined the maximum tags... INFO @ Tue, 10 Dec 2019 13:37:45: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 10 Dec 2019 13:37:45: #1 tags after filtering in treatment: 1545313 INFO @ Tue, 10 Dec 2019 13:37:45: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 10 Dec 2019 13:37:45: #1 finished! INFO @ Tue, 10 Dec 2019 13:37:45: #2 Build Peak Model... INFO @ Tue, 10 Dec 2019 13:37:45: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 10 Dec 2019 13:37:45: #2 number of paired peaks: 91 WARNING @ Tue, 10 Dec 2019 13:37:45: Too few paired peaks (91) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Tue, 10 Dec 2019 13:37:45: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 2 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換中... INFO @ Tue, 10 Dec 2019 13:37:59: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 10 Dec 2019 13:37:59: #1 read tag files... INFO @ Tue, 10 Dec 2019 13:37:59: #1 read treatment tags... INFO @ Tue, 10 Dec 2019 13:38:10: 1000000 INFO @ Tue, 10 Dec 2019 13:38:16: #1 tag size is determined as 101 bps INFO @ Tue, 10 Dec 2019 13:38:16: #1 tag size = 101 INFO @ Tue, 10 Dec 2019 13:38:16: #1 total tags in treatment: 1545313 INFO @ Tue, 10 Dec 2019 13:38:16: #1 user defined the maximum tags... INFO @ Tue, 10 Dec 2019 13:38:16: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 10 Dec 2019 13:38:16: #1 tags after filtering in treatment: 1545313 INFO @ Tue, 10 Dec 2019 13:38:16: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 10 Dec 2019 13:38:16: #1 finished! INFO @ Tue, 10 Dec 2019 13:38:16: #2 Build Peak Model... INFO @ Tue, 10 Dec 2019 13:38:16: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 10 Dec 2019 13:38:16: #2 number of paired peaks: 91 WARNING @ Tue, 10 Dec 2019 13:38:16: Too few paired peaks (91) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Tue, 10 Dec 2019 13:38:16: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 2 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX5086839/SRX5086839.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。