Job ID = 2641013 sra ファイルのダウンロード中... Read layout: PAIRED fastq に変換中... spots read : 2,011,405 reads read : 4,022,810 reads written : 4,022,810 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:01:23 2011405 reads; of these: 2011405 (100.00%) were paired; of these: 64325 (3.20%) aligned concordantly 0 times 1722808 (85.65%) aligned concordantly exactly 1 time 224272 (11.15%) aligned concordantly >1 times ---- 64325 pairs aligned concordantly 0 times; of these: 616 (0.96%) aligned discordantly 1 time ---- 63709 pairs aligned 0 times concordantly or discordantly; of these: 127418 mates make up the pairs; of these: 114037 (89.50%) aligned 0 times 8801 (6.91%) aligned exactly 1 time 4580 (3.59%) aligned >1 times 97.17% overall alignment rate Time searching: 00:01:23 Overall time: 00:01:23 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 152259 / 1947565 = 0.0782 in library ' ' BAM に変換しました。 Bed ファイルを作成中... INFO @ Sat, 24 Aug 2019 20:25:26: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 24 Aug 2019 20:25:26: #1 read tag files... INFO @ Sat, 24 Aug 2019 20:25:26: #1 read treatment tags... INFO @ Sat, 24 Aug 2019 20:25:34: 1000000 INFO @ Sat, 24 Aug 2019 20:25:41: 2000000 INFO @ Sat, 24 Aug 2019 20:25:48: 3000000 INFO @ Sat, 24 Aug 2019 20:25:52: #1 tag size is determined as 32 bps INFO @ Sat, 24 Aug 2019 20:25:52: #1 tag size = 32 INFO @ Sat, 24 Aug 2019 20:25:52: #1 total tags in treatment: 1794847 INFO @ Sat, 24 Aug 2019 20:25:52: #1 user defined the maximum tags... INFO @ Sat, 24 Aug 2019 20:25:52: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 24 Aug 2019 20:25:52: #1 tags after filtering in treatment: 1381576 INFO @ Sat, 24 Aug 2019 20:25:52: #1 Redundant rate of treatment: 0.23 INFO @ Sat, 24 Aug 2019 20:25:52: #1 finished! INFO @ Sat, 24 Aug 2019 20:25:52: #2 Build Peak Model... INFO @ Sat, 24 Aug 2019 20:25:52: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 24 Aug 2019 20:25:52: #2 number of paired peaks: 76 WARNING @ Sat, 24 Aug 2019 20:25:52: Too few paired peaks (76) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 24 Aug 2019 20:25:52: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 2 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling INFO @ Sat, 24 Aug 2019 20:25:56: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 24 Aug 2019 20:25:56: #1 read tag files... INFO @ Sat, 24 Aug 2019 20:25:56: #1 read treatment tags... INFO @ Sat, 24 Aug 2019 20:26:03: 1000000 INFO @ Sat, 24 Aug 2019 20:26:09: 2000000 INFO @ Sat, 24 Aug 2019 20:26:17: 3000000 INFO @ Sat, 24 Aug 2019 20:26:21: #1 tag size is determined as 32 bps INFO @ Sat, 24 Aug 2019 20:26:21: #1 tag size = 32 INFO @ Sat, 24 Aug 2019 20:26:21: #1 total tags in treatment: 1794847 INFO @ Sat, 24 Aug 2019 20:26:21: #1 user defined the maximum tags... INFO @ Sat, 24 Aug 2019 20:26:21: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 24 Aug 2019 20:26:21: #1 tags after filtering in treatment: 1381576 INFO @ Sat, 24 Aug 2019 20:26:21: #1 Redundant rate of treatment: 0.23 INFO @ Sat, 24 Aug 2019 20:26:21: #1 finished! INFO @ Sat, 24 Aug 2019 20:26:21: #2 Build Peak Model... INFO @ Sat, 24 Aug 2019 20:26:21: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 24 Aug 2019 20:26:21: #2 number of paired peaks: 76 WARNING @ Sat, 24 Aug 2019 20:26:21: Too few paired peaks (76) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 24 Aug 2019 20:26:21: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 2 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換中... INFO @ Sat, 24 Aug 2019 20:26:26: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 24 Aug 2019 20:26:26: #1 read tag files... INFO @ Sat, 24 Aug 2019 20:26:26: #1 read treatment tags... INFO @ Sat, 24 Aug 2019 20:26:33: 1000000 INFO @ Sat, 24 Aug 2019 20:26:39: 2000000 INFO @ Sat, 24 Aug 2019 20:26:46: 3000000 INFO @ Sat, 24 Aug 2019 20:26:50: #1 tag size is determined as 32 bps INFO @ Sat, 24 Aug 2019 20:26:50: #1 tag size = 32 INFO @ Sat, 24 Aug 2019 20:26:50: #1 total tags in treatment: 1794847 INFO @ Sat, 24 Aug 2019 20:26:50: #1 user defined the maximum tags... INFO @ Sat, 24 Aug 2019 20:26:50: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 24 Aug 2019 20:26:50: #1 tags after filtering in treatment: 1381576 INFO @ Sat, 24 Aug 2019 20:26:50: #1 Redundant rate of treatment: 0.23 INFO @ Sat, 24 Aug 2019 20:26:50: #1 finished! INFO @ Sat, 24 Aug 2019 20:26:50: #2 Build Peak Model... INFO @ Sat, 24 Aug 2019 20:26:50: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 24 Aug 2019 20:26:50: #2 number of paired peaks: 76 WARNING @ Sat, 24 Aug 2019 20:26:50: Too few paired peaks (76) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 24 Aug 2019 20:26:50: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX493933/SRX493933.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。