Job ID = 11193066 sra ファイルのダウンロード中... Completed: 291800K bytes transferred in 6 seconds (365464K bits/sec), in 1 file. sra ファイルのダウンロードが完了しました。 Read layout: SINGLE fastq に変換中... Read 14533896 spots for /home/okishinya/chipatlas/results/sacCer3/SRX4233915/SRR7361186.sra Written 14533896 spots for /home/okishinya/chipatlas/results/sacCer3/SRX4233915/SRR7361186.sra rm: cannot remove `[DSE]RX*': そのようなファイルやディレクトリはありません rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:03:05 14533896 reads; of these: 14533896 (100.00%) were unpaired; of these: 736289 (5.07%) aligned 0 times 12792713 (88.02%) aligned exactly 1 time 1004894 (6.91%) aligned >1 times 94.93% overall alignment rate Time searching: 00:03:05 Overall time: 00:03:05 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_sort_core] merging from 8 files... [bam_rmdupse_core] 4373471 / 13797607 = 0.3170 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Sat, 15 Sep 2018 10:59:26: # Command line: callpeak -t SRX4233915.bam -f BAM -g 12100000 -n SRX4233915.05 -q 1e-05 # ARGUMENTS LIST: # name = SRX4233915.05 # format = BAM # ChIP-seq file = ['SRX4233915.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Sep 2018 10:59:26: #1 read tag files... INFO @ Sat, 15 Sep 2018 10:59:26: #1 read treatment tags... INFO @ Sat, 15 Sep 2018 10:59:26: # Command line: callpeak -t SRX4233915.bam -f BAM -g 12100000 -n SRX4233915.10 -q 1e-10 # ARGUMENTS LIST: # name = SRX4233915.10 # format = BAM # ChIP-seq file = ['SRX4233915.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Sep 2018 10:59:26: #1 read tag files... INFO @ Sat, 15 Sep 2018 10:59:26: # Command line: callpeak -t SRX4233915.bam -f BAM -g 12100000 -n SRX4233915.20 -q 1e-20 # ARGUMENTS LIST: # name = SRX4233915.20 # format = BAM # ChIP-seq file = ['SRX4233915.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Sep 2018 10:59:26: #1 read treatment tags... INFO @ Sat, 15 Sep 2018 10:59:26: #1 read tag files... INFO @ Sat, 15 Sep 2018 10:59:26: #1 read treatment tags... INFO @ Sat, 15 Sep 2018 10:59:33: 1000000 INFO @ Sat, 15 Sep 2018 10:59:33: 1000000 INFO @ Sat, 15 Sep 2018 10:59:33: 1000000 INFO @ Sat, 15 Sep 2018 10:59:39: 2000000 INFO @ Sat, 15 Sep 2018 10:59:40: 2000000 INFO @ Sat, 15 Sep 2018 10:59:40: 2000000 INFO @ Sat, 15 Sep 2018 10:59:46: 3000000 INFO @ Sat, 15 Sep 2018 10:59:47: 3000000 INFO @ Sat, 15 Sep 2018 10:59:47: 3000000 INFO @ Sat, 15 Sep 2018 10:59:52: 4000000 INFO @ Sat, 15 Sep 2018 10:59:54: 4000000 INFO @ Sat, 15 Sep 2018 10:59:54: 4000000 INFO @ Sat, 15 Sep 2018 10:59:58: 5000000 INFO @ Sat, 15 Sep 2018 11:00:01: 5000000 INFO @ Sat, 15 Sep 2018 11:00:01: 5000000 INFO @ Sat, 15 Sep 2018 11:00:04: 6000000 INFO @ Sat, 15 Sep 2018 11:00:08: 6000000 INFO @ Sat, 15 Sep 2018 11:00:08: 6000000 INFO @ Sat, 15 Sep 2018 11:00:11: 7000000 INFO @ Sat, 15 Sep 2018 11:00:15: 7000000 INFO @ Sat, 15 Sep 2018 11:00:16: 7000000 INFO @ Sat, 15 Sep 2018 11:00:18: 8000000 INFO @ Sat, 15 Sep 2018 11:00:22: 8000000 INFO @ Sat, 15 Sep 2018 11:00:23: 8000000 INFO @ Sat, 15 Sep 2018 11:00:24: 9000000 INFO @ Sat, 15 Sep 2018 11:00:27: #1 tag size is determined as 47 bps INFO @ Sat, 15 Sep 2018 11:00:27: #1 tag size = 47 INFO @ Sat, 15 Sep 2018 11:00:27: #1 total tags in treatment: 9424136 INFO @ Sat, 15 Sep 2018 11:00:27: #1 user defined the maximum tags... INFO @ Sat, 15 Sep 2018 11:00:27: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Sep 2018 11:00:27: #1 tags after filtering in treatment: 9424136 INFO @ Sat, 15 Sep 2018 11:00:27: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 15 Sep 2018 11:00:27: #1 finished! INFO @ Sat, 15 Sep 2018 11:00:27: #2 Build Peak Model... INFO @ Sat, 15 Sep 2018 11:00:27: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Sep 2018 11:00:28: #2 number of paired peaks: 0 WARNING @ Sat, 15 Sep 2018 11:00:28: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Sep 2018 11:00:28: Process for pairing-model is terminated! cat: SRX4233915.05_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX4233915.05_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX4233915.05_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX4233915.05_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Sat, 15 Sep 2018 11:00:29: 9000000 INFO @ Sat, 15 Sep 2018 11:00:30: 9000000 INFO @ Sat, 15 Sep 2018 11:00:33: #1 tag size is determined as 47 bps INFO @ Sat, 15 Sep 2018 11:00:33: #1 tag size = 47 INFO @ Sat, 15 Sep 2018 11:00:33: #1 total tags in treatment: 9424136 INFO @ Sat, 15 Sep 2018 11:00:33: #1 user defined the maximum tags... INFO @ Sat, 15 Sep 2018 11:00:33: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Sep 2018 11:00:33: #1 tags after filtering in treatment: 9424136 INFO @ Sat, 15 Sep 2018 11:00:33: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 15 Sep 2018 11:00:33: #1 finished! INFO @ Sat, 15 Sep 2018 11:00:33: #2 Build Peak Model... INFO @ Sat, 15 Sep 2018 11:00:33: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Sep 2018 11:00:33: #1 tag size is determined as 47 bps INFO @ Sat, 15 Sep 2018 11:00:33: #1 tag size = 47 INFO @ Sat, 15 Sep 2018 11:00:33: #1 total tags in treatment: 9424136 INFO @ Sat, 15 Sep 2018 11:00:33: #1 user defined the maximum tags... INFO @ Sat, 15 Sep 2018 11:00:33: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Sep 2018 11:00:33: #1 tags after filtering in treatment: 9424136 INFO @ Sat, 15 Sep 2018 11:00:33: #1 Redundant rate of treatment: 0.00 INFO @ Sat, 15 Sep 2018 11:00:33: #1 finished! INFO @ Sat, 15 Sep 2018 11:00:33: #2 Build Peak Model... INFO @ Sat, 15 Sep 2018 11:00:33: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Sep 2018 11:00:33: #2 number of paired peaks: 0 WARNING @ Sat, 15 Sep 2018 11:00:33: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Sep 2018 11:00:33: Process for pairing-model is terminated! cat: SRX4233915.20_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX4233915.20_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX4233915.20_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX4233915.20_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Sat, 15 Sep 2018 11:00:34: #2 number of paired peaks: 0 WARNING @ Sat, 15 Sep 2018 11:00:34: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Sep 2018 11:00:34: Process for pairing-model is terminated! cat: SRX4233915.10_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX4233915.10_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX4233915.10_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX4233915.10_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。