Job ID = 9162844 sra ファイルのダウンロード中... Completed: 151747K bytes transferred in 4 seconds (286963K bits/sec), in 1 file, 2 directories. sra ファイルのダウンロードが完了しました。 Read layout: SINGLE fastq に変換中... Written 6110876 spots for /home/okishinya/chipatlas/results/sacCer3/SRX385605/SRR1041214.sra Written 6110876 spots total rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:01:14 6110876 reads; of these: 6110876 (100.00%) were unpaired; of these: 571364 (9.35%) aligned 0 times 5017250 (82.10%) aligned exactly 1 time 522262 (8.55%) aligned >1 times 90.65% overall alignment rate Time searching: 00:01:14 Overall time: 00:01:14 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdupse_core] 1939330 / 5539512 = 0.3501 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Wed, 28 Jun 2017 09:00:46: # Command line: callpeak -t SRX385605.bam -f BAM -g 12100000 -n SRX385605.20 -q 1e-20 # ARGUMENTS LIST: # name = SRX385605.20 # format = BAM # ChIP-seq file = ['SRX385605.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 09:00:46: #1 read tag files... INFO @ Wed, 28 Jun 2017 09:00:46: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 09:00:46: # Command line: callpeak -t SRX385605.bam -f BAM -g 12100000 -n SRX385605.10 -q 1e-10 # ARGUMENTS LIST: # name = SRX385605.10 # format = BAM # ChIP-seq file = ['SRX385605.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 09:00:46: #1 read tag files... INFO @ Wed, 28 Jun 2017 09:00:46: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 09:00:46: # Command line: callpeak -t SRX385605.bam -f BAM -g 12100000 -n SRX385605.05 -q 1e-05 # ARGUMENTS LIST: # name = SRX385605.05 # format = BAM # ChIP-seq file = ['SRX385605.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 09:00:46: #1 read tag files... INFO @ Wed, 28 Jun 2017 09:00:46: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 09:00:55: 1000000 INFO @ Wed, 28 Jun 2017 09:00:55: 1000000 INFO @ Wed, 28 Jun 2017 09:00:55: 1000000 INFO @ Wed, 28 Jun 2017 09:01:04: 2000000 INFO @ Wed, 28 Jun 2017 09:01:04: 2000000 INFO @ Wed, 28 Jun 2017 09:01:04: 2000000 INFO @ Wed, 28 Jun 2017 09:01:13: 3000000 INFO @ Wed, 28 Jun 2017 09:01:13: 3000000 INFO @ Wed, 28 Jun 2017 09:01:13: 3000000 INFO @ Wed, 28 Jun 2017 09:01:18: #1 tag size is determined as 50 bps INFO @ Wed, 28 Jun 2017 09:01:18: #1 tag size is determined as 50 bps INFO @ Wed, 28 Jun 2017 09:01:18: #1 tag size = 50 INFO @ Wed, 28 Jun 2017 09:01:18: #1 tag size = 50 INFO @ Wed, 28 Jun 2017 09:01:18: #1 total tags in treatment: 3600182 INFO @ Wed, 28 Jun 2017 09:01:18: #1 total tags in treatment: 3600182 INFO @ Wed, 28 Jun 2017 09:01:18: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 09:01:18: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 09:01:18: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 09:01:18: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 09:01:18: #1 tag size is determined as 50 bps INFO @ Wed, 28 Jun 2017 09:01:18: #1 tag size = 50 INFO @ Wed, 28 Jun 2017 09:01:18: #1 total tags in treatment: 3600182 INFO @ Wed, 28 Jun 2017 09:01:18: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 09:01:18: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 09:01:18: #1 tags after filtering in treatment: 3600182 INFO @ Wed, 28 Jun 2017 09:01:18: #1 tags after filtering in treatment: 3600182 INFO @ Wed, 28 Jun 2017 09:01:18: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 09:01:18: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 09:01:18: #1 finished! INFO @ Wed, 28 Jun 2017 09:01:18: #1 finished! INFO @ Wed, 28 Jun 2017 09:01:18: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 09:01:18: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 09:01:18: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 09:01:18: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 09:01:18: #1 tags after filtering in treatment: 3600182 INFO @ Wed, 28 Jun 2017 09:01:18: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 09:01:18: #1 finished! INFO @ Wed, 28 Jun 2017 09:01:18: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 09:01:18: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 09:01:18: #2 number of paired peaks: 97 WARNING @ Wed, 28 Jun 2017 09:01:18: Too few paired peaks (97) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 09:01:18: Process for pairing-model is terminated! INFO @ Wed, 28 Jun 2017 09:01:18: #2 number of paired peaks: 97 WARNING @ Wed, 28 Jun 2017 09:01:18: Too few paired peaks (97) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 09:01:18: Process for pairing-model is terminated! INFO @ Wed, 28 Jun 2017 09:01:18: #2 number of paired peaks: 97 WARNING @ Wed, 28 Jun 2017 09:01:18: Too few paired peaks (97) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 09:01:18: Process for pairing-model is terminated! cat: SRX385605.10_peaks.narrowPeak: そのようなファイルやディレクトリはありません cat: SRX385605.05_peaks.narrowPeak: そのようなファイルやディレクトリはありません cat: SRX385605.20_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) needLargeMem: trying to allocate 0 bytes (limit: 17179869184) pass1 - making usageList (0 chroms): 1 millis rm: cannot remove `SRX385605.10_model.r'needLargeMem: trying to allocate 0 bytes (limit: 17179869184) : そのようなファイルやディレクトリはありません rm: cannot remove `SRX385605.05_model.r'rm: cannot remove `SRX385605.10_*.xls': そのようなファイルやディレクトリはありません: そのようなファイルやディレクトリはありません rm: cannot remove `SRX385605.05_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX385605.10_peaks.narrowPeak': そのようなファイルやディレクトリはありません rm: cannot remove `SRX385605.05_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling CompletedMACS2peakCalling rm: cannot remove `SRX385605.20_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX385605.20_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX385605.20_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。