Job ID = 2010429 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... spots read : 8,588,123 reads read : 8,588,123 reads written : 8,588,123 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:02:10 8588123 reads; of these: 8588123 (100.00%) were unpaired; of these: 1743135 (20.30%) aligned 0 times 6036016 (70.28%) aligned exactly 1 time 808972 (9.42%) aligned >1 times 79.70% overall alignment rate Time searching: 00:02:10 Overall time: 00:02:10 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdupse_core] 5724720 / 6844988 = 0.8363 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Fri, 05 Jul 2019 22:41:17: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 22:41:17: #1 read tag files... INFO @ Fri, 05 Jul 2019 22:41:17: #1 read treatment tags... INFO @ Fri, 05 Jul 2019 22:41:18: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 22:41:18: #1 read tag files... INFO @ Fri, 05 Jul 2019 22:41:18: #1 read treatment tags... INFO @ Fri, 05 Jul 2019 22:41:19: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 22:41:19: #1 read tag files... INFO @ Fri, 05 Jul 2019 22:41:19: #1 read treatment tags... INFO @ Fri, 05 Jul 2019 22:41:30: 1000000 INFO @ Fri, 05 Jul 2019 22:41:30: 1000000 INFO @ Fri, 05 Jul 2019 22:41:30: 1000000 INFO @ Fri, 05 Jul 2019 22:41:31: #1 tag size is determined as 51 bps INFO @ Fri, 05 Jul 2019 22:41:31: #1 tag size = 51 INFO @ Fri, 05 Jul 2019 22:41:31: #1 total tags in treatment: 1120268 INFO @ Fri, 05 Jul 2019 22:41:31: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 22:41:31: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 22:41:31: #1 tags after filtering in treatment: 1120268 INFO @ Fri, 05 Jul 2019 22:41:31: #1 Redundant rate of treatment: 0.00 INFO @ Fri, 05 Jul 2019 22:41:31: #1 finished! INFO @ Fri, 05 Jul 2019 22:41:31: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 22:41:31: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 22:41:31: #2 number of paired peaks: 99 WARNING @ Fri, 05 Jul 2019 22:41:31: Too few paired peaks (99) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 05 Jul 2019 22:41:31: Process for pairing-model is terminated! INFO @ Fri, 05 Jul 2019 22:41:31: #1 tag size is determined as 51 bps INFO @ Fri, 05 Jul 2019 22:41:31: #1 tag size = 51 INFO @ Fri, 05 Jul 2019 22:41:31: #1 total tags in treatment: 1120268 INFO @ Fri, 05 Jul 2019 22:41:31: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 22:41:31: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 22:41:31: #1 tags after filtering in treatment: 1120268 INFO @ Fri, 05 Jul 2019 22:41:31: #1 Redundant rate of treatment: 0.00 INFO @ Fri, 05 Jul 2019 22:41:31: #1 finished! INFO @ Fri, 05 Jul 2019 22:41:31: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 22:41:31: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 22:41:31: #2 number of paired peaks: 99 WARNING @ Fri, 05 Jul 2019 22:41:31: Too few paired peaks (99) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 05 Jul 2019 22:41:31: Process for pairing-model is terminated! INFO @ Fri, 05 Jul 2019 22:41:31: #1 tag size is determined as 51 bps INFO @ Fri, 05 Jul 2019 22:41:31: #1 tag size = 51 INFO @ Fri, 05 Jul 2019 22:41:31: #1 total tags in treatment: 1120268 INFO @ Fri, 05 Jul 2019 22:41:31: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 22:41:31: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 22:41:31: #1 tags after filtering in treatment: 1120268 INFO @ Fri, 05 Jul 2019 22:41:31: #1 Redundant rate of treatment: 0.00 INFO @ Fri, 05 Jul 2019 22:41:31: #1 finished! INFO @ Fri, 05 Jul 2019 22:41:31: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 22:41:31: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 22:41:32: #2 number of paired peaks: 99 WARNING @ Fri, 05 Jul 2019 22:41:32: Too few paired peaks (99) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 05 Jul 2019 22:41:32: Process for pairing-model is terminated! BedGraph に変換しました。 cut: /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.10_peaks.narrowPeak: No such file or directory cut: /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.20_peaks.narrowPeakcut: /home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.05_peaks.narrowPeak: No such file or directory : No such file or directory BigWig に変換中... pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX377115/SRX377115.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BigWig に変換しました。