Job ID = 9384125 sra ファイルのダウンロード中... Completed: 693519K bytes transferred in 17 seconds (329371K bits/sec), in 1 file, 2 directories. sra ファイルのダウンロードが完了しました。 Read layout: PAIRED fastq に変換中... Written 5058741 spots for /home/okishinya/chipatlas/results/sacCer3/SRX2963109/SRR5763440.sra Written 5058741 spots total rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:06:39 5058741 reads; of these: 5058741 (100.00%) were paired; of these: 749049 (14.81%) aligned concordantly 0 times 3936848 (77.82%) aligned concordantly exactly 1 time 372844 (7.37%) aligned concordantly >1 times ---- 749049 pairs aligned concordantly 0 times; of these: 166174 (22.18%) aligned discordantly 1 time ---- 582875 pairs aligned 0 times concordantly or discordantly; of these: 1165750 mates make up the pairs; of these: 965416 (82.82%) aligned 0 times 151598 (13.00%) aligned exactly 1 time 48736 (4.18%) aligned >1 times 90.46% overall alignment rate Time searching: 00:06:39 Overall time: 00:06:39 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 59144 / 4455928 = 0.0133 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Sun, 06 Aug 2017 00:53:41: # Command line: callpeak -t SRX2963109.bam -f BAM -g 12100000 -n SRX2963109.10 -q 1e-10 # ARGUMENTS LIST: # name = SRX2963109.10 # format = BAM # ChIP-seq file = ['SRX2963109.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sun, 06 Aug 2017 00:53:41: #1 read tag files... INFO @ Sun, 06 Aug 2017 00:53:41: #1 read treatment tags... INFO @ Sun, 06 Aug 2017 00:53:41: # Command line: callpeak -t SRX2963109.bam -f BAM -g 12100000 -n SRX2963109.05 -q 1e-05 # ARGUMENTS LIST: # name = SRX2963109.05 # format = BAM # ChIP-seq file = ['SRX2963109.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sun, 06 Aug 2017 00:53:41: #1 read tag files... INFO @ Sun, 06 Aug 2017 00:53:41: #1 read treatment tags... INFO @ Sun, 06 Aug 2017 00:53:41: # Command line: callpeak -t SRX2963109.bam -f BAM -g 12100000 -n SRX2963109.20 -q 1e-20 # ARGUMENTS LIST: # name = SRX2963109.20 # format = BAM # ChIP-seq file = ['SRX2963109.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sun, 06 Aug 2017 00:53:41: #1 read tag files... INFO @ Sun, 06 Aug 2017 00:53:41: #1 read treatment tags... INFO @ Sun, 06 Aug 2017 00:53:49: 1000000 INFO @ Sun, 06 Aug 2017 00:53:49: 1000000 INFO @ Sun, 06 Aug 2017 00:53:49: 1000000 INFO @ Sun, 06 Aug 2017 00:53:56: 2000000 INFO @ Sun, 06 Aug 2017 00:53:57: 2000000 INFO @ Sun, 06 Aug 2017 00:53:57: 2000000 INFO @ Sun, 06 Aug 2017 00:54:03: 3000000 INFO @ Sun, 06 Aug 2017 00:54:05: 3000000 INFO @ Sun, 06 Aug 2017 00:54:05: 3000000 INFO @ Sun, 06 Aug 2017 00:54:10: 4000000 INFO @ Sun, 06 Aug 2017 00:54:13: 4000000 INFO @ Sun, 06 Aug 2017 00:54:13: 4000000 INFO @ Sun, 06 Aug 2017 00:54:17: 5000000 INFO @ Sun, 06 Aug 2017 00:54:21: 5000000 INFO @ Sun, 06 Aug 2017 00:54:21: 5000000 INFO @ Sun, 06 Aug 2017 00:54:24: 6000000 INFO @ Sun, 06 Aug 2017 00:54:28: 6000000 INFO @ Sun, 06 Aug 2017 00:54:28: 6000000 INFO @ Sun, 06 Aug 2017 00:54:31: 7000000 INFO @ Sun, 06 Aug 2017 00:54:36: 7000000 INFO @ Sun, 06 Aug 2017 00:54:36: 7000000 INFO @ Sun, 06 Aug 2017 00:54:38: 8000000 INFO @ Sun, 06 Aug 2017 00:54:44: 8000000 INFO @ Sun, 06 Aug 2017 00:54:44: 8000000 INFO @ Sun, 06 Aug 2017 00:54:45: 9000000 INFO @ Sun, 06 Aug 2017 00:54:45: #1 tag size is determined as 101 bps INFO @ Sun, 06 Aug 2017 00:54:45: #1 tag size = 101 INFO @ Sun, 06 Aug 2017 00:54:45: #1 total tags in treatment: 4251746 INFO @ Sun, 06 Aug 2017 00:54:45: #1 user defined the maximum tags... INFO @ Sun, 06 Aug 2017 00:54:45: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sun, 06 Aug 2017 00:54:45: #1 tags after filtering in treatment: 3693252 INFO @ Sun, 06 Aug 2017 00:54:45: #1 Redundant rate of treatment: 0.13 INFO @ Sun, 06 Aug 2017 00:54:45: #1 finished! INFO @ Sun, 06 Aug 2017 00:54:45: #2 Build Peak Model... INFO @ Sun, 06 Aug 2017 00:54:45: #2 looking for paired plus/minus strand peaks... INFO @ Sun, 06 Aug 2017 00:54:45: #2 number of paired peaks: 8 WARNING @ Sun, 06 Aug 2017 00:54:45: Too few paired peaks (8) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sun, 06 Aug 2017 00:54:45: Process for pairing-model is terminated! cat: SRX2963109.10_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX2963109.10_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX2963109.10_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX2963109.10_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Sun, 06 Aug 2017 00:54:52: 9000000 INFO @ Sun, 06 Aug 2017 00:54:52: 9000000 INFO @ Sun, 06 Aug 2017 00:54:52: #1 tag size is determined as 101 bps INFO @ Sun, 06 Aug 2017 00:54:52: #1 tag size = 101 INFO @ Sun, 06 Aug 2017 00:54:52: #1 total tags in treatment: 4251746 INFO @ Sun, 06 Aug 2017 00:54:52: #1 user defined the maximum tags... INFO @ Sun, 06 Aug 2017 00:54:52: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sun, 06 Aug 2017 00:54:52: #1 tag size is determined as 101 bps INFO @ Sun, 06 Aug 2017 00:54:52: #1 tag size = 101 INFO @ Sun, 06 Aug 2017 00:54:52: #1 total tags in treatment: 4251746 INFO @ Sun, 06 Aug 2017 00:54:52: #1 user defined the maximum tags... INFO @ Sun, 06 Aug 2017 00:54:52: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sun, 06 Aug 2017 00:54:52: #1 tags after filtering in treatment: 3693252 INFO @ Sun, 06 Aug 2017 00:54:52: #1 Redundant rate of treatment: 0.13 INFO @ Sun, 06 Aug 2017 00:54:52: #1 finished! INFO @ Sun, 06 Aug 2017 00:54:52: #2 Build Peak Model... INFO @ Sun, 06 Aug 2017 00:54:52: #2 looking for paired plus/minus strand peaks... INFO @ Sun, 06 Aug 2017 00:54:52: #1 tags after filtering in treatment: 3693252 INFO @ Sun, 06 Aug 2017 00:54:52: #1 Redundant rate of treatment: 0.13 INFO @ Sun, 06 Aug 2017 00:54:52: #1 finished! INFO @ Sun, 06 Aug 2017 00:54:52: #2 Build Peak Model... INFO @ Sun, 06 Aug 2017 00:54:52: #2 looking for paired plus/minus strand peaks... INFO @ Sun, 06 Aug 2017 00:54:52: #2 number of paired peaks: 8 WARNING @ Sun, 06 Aug 2017 00:54:52: Too few paired peaks (8) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sun, 06 Aug 2017 00:54:52: Process for pairing-model is terminated! INFO @ Sun, 06 Aug 2017 00:54:52: #2 number of paired peaks: 8 WARNING @ Sun, 06 Aug 2017 00:54:52: Too few paired peaks (8) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sun, 06 Aug 2017 00:54:52: Process for pairing-model is terminated! cat: SRX2963109.20_peaks.narrowPeak: そのようなファイルやディレクトリはありません cat: SRX2963109.05_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX2963109.20_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX2963109.20_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX2963109.20_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling rm: cannot remove `SRX2963109.05_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX2963109.05_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX2963109.05_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。