Job ID = 11192868 sra ファイルのダウンロード中... Completed: 688422K bytes transferred in 9 seconds (598324K bits/sec), in 1 file. sra ファイルのダウンロードが完了しました。 Read layout: PAIRED fastq に変換中... Read 12084326 spots for /home/okishinya/chipatlas/results/sacCer3/SRX2252392/SRR4432883.sra Written 12084326 spots for /home/okishinya/chipatlas/results/sacCer3/SRX2252392/SRR4432883.sra rm: cannot remove `[DSE]RX*': そのようなファイルやディレクトリはありません rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:11:35 12084326 reads; of these: 12084326 (100.00%) were paired; of these: 681609 (5.64%) aligned concordantly 0 times 9479195 (78.44%) aligned concordantly exactly 1 time 1923522 (15.92%) aligned concordantly >1 times ---- 681609 pairs aligned concordantly 0 times; of these: 68941 (10.11%) aligned discordantly 1 time ---- 612668 pairs aligned 0 times concordantly or discordantly; of these: 1225336 mates make up the pairs; of these: 856887 (69.93%) aligned 0 times 260251 (21.24%) aligned exactly 1 time 108198 (8.83%) aligned >1 times 96.45% overall alignment rate Time searching: 00:11:35 Overall time: 00:11:35 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_sort_core] merging from 12 files... [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 11149813 / 11468148 = 0.9722 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Sat, 15 Sep 2018 10:21:12: # Command line: callpeak -t SRX2252392.bam -f BAM -g 12100000 -n SRX2252392.10 -q 1e-10 # ARGUMENTS LIST: # name = SRX2252392.10 # format = BAM # ChIP-seq file = ['SRX2252392.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Sep 2018 10:21:12: #1 read tag files... INFO @ Sat, 15 Sep 2018 10:21:12: #1 read treatment tags... INFO @ Sat, 15 Sep 2018 10:21:12: # Command line: callpeak -t SRX2252392.bam -f BAM -g 12100000 -n SRX2252392.20 -q 1e-20 # ARGUMENTS LIST: # name = SRX2252392.20 # format = BAM # ChIP-seq file = ['SRX2252392.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Sep 2018 10:21:12: #1 read tag files... INFO @ Sat, 15 Sep 2018 10:21:12: #1 read treatment tags... INFO @ Sat, 15 Sep 2018 10:21:12: # Command line: callpeak -t SRX2252392.bam -f BAM -g 12100000 -n SRX2252392.05 -q 1e-05 # ARGUMENTS LIST: # name = SRX2252392.05 # format = BAM # ChIP-seq file = ['SRX2252392.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Sep 2018 10:21:12: #1 read tag files... INFO @ Sat, 15 Sep 2018 10:21:12: #1 read treatment tags... INFO @ Sat, 15 Sep 2018 10:21:18: 1000000 INFO @ Sat, 15 Sep 2018 10:21:18: #1 tag size is determined as 76 bps INFO @ Sat, 15 Sep 2018 10:21:18: #1 tag size = 76 INFO @ Sat, 15 Sep 2018 10:21:18: #1 total tags in treatment: 311821 INFO @ Sat, 15 Sep 2018 10:21:18: #1 user defined the maximum tags... INFO @ Sat, 15 Sep 2018 10:21:18: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Sep 2018 10:21:18: #1 tags after filtering in treatment: 268081 INFO @ Sat, 15 Sep 2018 10:21:18: #1 Redundant rate of treatment: 0.14 INFO @ Sat, 15 Sep 2018 10:21:18: #1 finished! INFO @ Sat, 15 Sep 2018 10:21:18: #2 Build Peak Model... INFO @ Sat, 15 Sep 2018 10:21:18: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Sep 2018 10:21:18: 1000000 INFO @ Sat, 15 Sep 2018 10:21:18: #2 number of paired peaks: 321 WARNING @ Sat, 15 Sep 2018 10:21:18: Fewer paired peaks (321) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 321 pairs to build model! INFO @ Sat, 15 Sep 2018 10:21:18: start model_add_line... INFO @ Sat, 15 Sep 2018 10:21:18: start X-correlation... INFO @ Sat, 15 Sep 2018 10:21:18: end of X-cor INFO @ Sat, 15 Sep 2018 10:21:18: #2 finished! INFO @ Sat, 15 Sep 2018 10:21:18: #2 predicted fragment length is 193 bps INFO @ Sat, 15 Sep 2018 10:21:18: #2 alternative fragment length(s) may be 166,193,203,591 bps INFO @ Sat, 15 Sep 2018 10:21:18: #2.2 Generate R script for model : SRX2252392.10_model.r INFO @ Sat, 15 Sep 2018 10:21:18: #3 Call peaks... INFO @ Sat, 15 Sep 2018 10:21:18: #1 tag size is determined as 76 bps INFO @ Sat, 15 Sep 2018 10:21:18: #1 tag size = 76 INFO @ Sat, 15 Sep 2018 10:21:18: #1 total tags in treatment: 311821 INFO @ Sat, 15 Sep 2018 10:21:18: #1 user defined the maximum tags... INFO @ Sat, 15 Sep 2018 10:21:18: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Sep 2018 10:21:18: #3 Pre-compute pvalue-qvalue table... INFO @ Sat, 15 Sep 2018 10:21:18: #1 tags after filtering in treatment: 268081 INFO @ Sat, 15 Sep 2018 10:21:18: #1 Redundant rate of treatment: 0.14 INFO @ Sat, 15 Sep 2018 10:21:18: #1 finished! INFO @ Sat, 15 Sep 2018 10:21:18: #2 Build Peak Model... INFO @ Sat, 15 Sep 2018 10:21:18: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Sep 2018 10:21:18: #2 number of paired peaks: 321 WARNING @ Sat, 15 Sep 2018 10:21:18: Fewer paired peaks (321) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 321 pairs to build model! INFO @ Sat, 15 Sep 2018 10:21:18: start model_add_line... INFO @ Sat, 15 Sep 2018 10:21:18: start X-correlation... INFO @ Sat, 15 Sep 2018 10:21:18: end of X-cor INFO @ Sat, 15 Sep 2018 10:21:18: #2 finished! INFO @ Sat, 15 Sep 2018 10:21:18: #2 predicted fragment length is 193 bps INFO @ Sat, 15 Sep 2018 10:21:18: #2 alternative fragment length(s) may be 166,193,203,591 bps INFO @ Sat, 15 Sep 2018 10:21:18: #2.2 Generate R script for model : SRX2252392.05_model.r INFO @ Sat, 15 Sep 2018 10:21:18: #3 Call peaks... INFO @ Sat, 15 Sep 2018 10:21:18: #3 Pre-compute pvalue-qvalue table... INFO @ Sat, 15 Sep 2018 10:21:18: 1000000 INFO @ Sat, 15 Sep 2018 10:21:18: #1 tag size is determined as 76 bps INFO @ Sat, 15 Sep 2018 10:21:18: #1 tag size = 76 INFO @ Sat, 15 Sep 2018 10:21:18: #1 total tags in treatment: 311821 INFO @ Sat, 15 Sep 2018 10:21:18: #1 user defined the maximum tags... INFO @ Sat, 15 Sep 2018 10:21:18: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Sep 2018 10:21:18: #1 tags after filtering in treatment: 268081 INFO @ Sat, 15 Sep 2018 10:21:18: #1 Redundant rate of treatment: 0.14 INFO @ Sat, 15 Sep 2018 10:21:18: #1 finished! INFO @ Sat, 15 Sep 2018 10:21:18: #2 Build Peak Model... INFO @ Sat, 15 Sep 2018 10:21:18: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Sep 2018 10:21:18: #2 number of paired peaks: 321 WARNING @ Sat, 15 Sep 2018 10:21:18: Fewer paired peaks (321) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 321 pairs to build model! INFO @ Sat, 15 Sep 2018 10:21:18: start model_add_line... INFO @ Sat, 15 Sep 2018 10:21:18: start X-correlation... INFO @ Sat, 15 Sep 2018 10:21:18: end of X-cor INFO @ Sat, 15 Sep 2018 10:21:18: #2 finished! INFO @ Sat, 15 Sep 2018 10:21:18: #2 predicted fragment length is 193 bps INFO @ Sat, 15 Sep 2018 10:21:18: #2 alternative fragment length(s) may be 166,193,203,591 bps INFO @ Sat, 15 Sep 2018 10:21:18: #2.2 Generate R script for model : SRX2252392.20_model.r INFO @ Sat, 15 Sep 2018 10:21:18: #3 Call peaks... INFO @ Sat, 15 Sep 2018 10:21:18: #3 Pre-compute pvalue-qvalue table... INFO @ Sat, 15 Sep 2018 10:21:19: #3 Call peaks for each chromosome... INFO @ Sat, 15 Sep 2018 10:21:19: #3 Call peaks for each chromosome... INFO @ Sat, 15 Sep 2018 10:21:19: #3 Call peaks for each chromosome... INFO @ Sat, 15 Sep 2018 10:21:19: #4 Write output xls file... SRX2252392.10_peaks.xls INFO @ Sat, 15 Sep 2018 10:21:19: #4 Write peak in narrowPeak format file... SRX2252392.10_peaks.narrowPeak INFO @ Sat, 15 Sep 2018 10:21:19: #4 Write summits bed file... SRX2252392.10_summits.bed INFO @ Sat, 15 Sep 2018 10:21:19: Done! pass1 - making usageList (15 chroms): 1 millis pass2 - checking and writing primary data (73 records, 4 fields): 2 millis CompletedMACS2peakCalling INFO @ Sat, 15 Sep 2018 10:21:19: #4 Write output xls file... SRX2252392.05_peaks.xls INFO @ Sat, 15 Sep 2018 10:21:19: #4 Write peak in narrowPeak format file... SRX2252392.05_peaks.narrowPeak INFO @ Sat, 15 Sep 2018 10:21:19: #4 Write summits bed file... SRX2252392.05_summits.bed INFO @ Sat, 15 Sep 2018 10:21:19: Done! pass1 - making usageList (16 chroms): 0 millis pass2 - checking and writing primary data (159 records, 4 fields): 3 millis CompletedMACS2peakCalling INFO @ Sat, 15 Sep 2018 10:21:20: #4 Write output xls file... SRX2252392.20_peaks.xls INFO @ Sat, 15 Sep 2018 10:21:20: #4 Write peak in narrowPeak format file... SRX2252392.20_peaks.narrowPeak INFO @ Sat, 15 Sep 2018 10:21:20: #4 Write summits bed file... SRX2252392.20_summits.bed INFO @ Sat, 15 Sep 2018 10:21:20: Done! pass1 - making usageList (11 chroms): 0 millis pass2 - checking and writing primary data (26 records, 4 fields): 2 millis CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。