Job ID = 11192792 sra ファイルのダウンロード中... Completed: 30434K bytes transferred in 3 seconds (74597K bits/sec), in 1 file. sra ファイルのダウンロードが完了しました。 Read layout: PAIRED fastq に変換中... Read 1010993 spots for /home/okishinya/chipatlas/results/sacCer3/SRX1924913/SRR3824944.sra Written 1010993 spots for /home/okishinya/chipatlas/results/sacCer3/SRX1924913/SRR3824944.sra rm: cannot remove `[DSE]RX*': そのようなファイルやディレクトリはありません rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:00:44 1010993 reads; of these: 1010993 (100.00%) were paired; of these: 116234 (11.50%) aligned concordantly 0 times 834781 (82.57%) aligned concordantly exactly 1 time 59978 (5.93%) aligned concordantly >1 times ---- 116234 pairs aligned concordantly 0 times; of these: 20898 (17.98%) aligned discordantly 1 time ---- 95336 pairs aligned 0 times concordantly or discordantly; of these: 190672 mates make up the pairs; of these: 142245 (74.60%) aligned 0 times 41226 (21.62%) aligned exactly 1 time 7201 (3.78%) aligned >1 times 92.97% overall alignment rate Time searching: 00:00:44 Overall time: 00:00:44 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 737175 / 907162 = 0.8126 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Sat, 15 Sep 2018 09:55:41: # Command line: callpeak -t SRX1924913.bam -f BAM -g 12100000 -n SRX1924913.20 -q 1e-20 # ARGUMENTS LIST: # name = SRX1924913.20 # format = BAM # ChIP-seq file = ['SRX1924913.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Sep 2018 09:55:41: #1 read tag files... INFO @ Sat, 15 Sep 2018 09:55:41: # Command line: callpeak -t SRX1924913.bam -f BAM -g 12100000 -n SRX1924913.10 -q 1e-10 # ARGUMENTS LIST: # name = SRX1924913.10 # format = BAM # ChIP-seq file = ['SRX1924913.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Sep 2018 09:55:41: #1 read treatment tags... INFO @ Sat, 15 Sep 2018 09:55:41: #1 read tag files... INFO @ Sat, 15 Sep 2018 09:55:41: #1 read treatment tags... INFO @ Sat, 15 Sep 2018 09:55:41: # Command line: callpeak -t SRX1924913.bam -f BAM -g 12100000 -n SRX1924913.05 -q 1e-05 # ARGUMENTS LIST: # name = SRX1924913.05 # format = BAM # ChIP-seq file = ['SRX1924913.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Sep 2018 09:55:41: #1 read tag files... INFO @ Sat, 15 Sep 2018 09:55:41: #1 read treatment tags... INFO @ Sat, 15 Sep 2018 09:55:44: #1 tag size is determined as 38 bps INFO @ Sat, 15 Sep 2018 09:55:44: #1 tag size is determined as 38 bps INFO @ Sat, 15 Sep 2018 09:55:44: #1 tag size is determined as 38 bps INFO @ Sat, 15 Sep 2018 09:55:44: #1 tag size = 38 INFO @ Sat, 15 Sep 2018 09:55:44: #1 tag size = 38 INFO @ Sat, 15 Sep 2018 09:55:44: #1 tag size = 38 INFO @ Sat, 15 Sep 2018 09:55:44: #1 total tags in treatment: 165717 INFO @ Sat, 15 Sep 2018 09:55:44: #1 total tags in treatment: 165717 INFO @ Sat, 15 Sep 2018 09:55:44: #1 total tags in treatment: 165717 INFO @ Sat, 15 Sep 2018 09:55:44: #1 user defined the maximum tags... INFO @ Sat, 15 Sep 2018 09:55:44: #1 user defined the maximum tags... INFO @ Sat, 15 Sep 2018 09:55:44: #1 user defined the maximum tags... INFO @ Sat, 15 Sep 2018 09:55:44: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Sep 2018 09:55:44: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Sep 2018 09:55:44: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Sep 2018 09:55:44: #1 tags after filtering in treatment: 160162 INFO @ Sat, 15 Sep 2018 09:55:44: #1 Redundant rate of treatment: 0.03 INFO @ Sat, 15 Sep 2018 09:55:44: #1 tags after filtering in treatment: 160162 INFO @ Sat, 15 Sep 2018 09:55:44: #1 finished! INFO @ Sat, 15 Sep 2018 09:55:44: #1 tags after filtering in treatment: 160162 INFO @ Sat, 15 Sep 2018 09:55:44: #2 Build Peak Model... INFO @ Sat, 15 Sep 2018 09:55:44: #1 Redundant rate of treatment: 0.03 INFO @ Sat, 15 Sep 2018 09:55:44: #1 Redundant rate of treatment: 0.03 INFO @ Sat, 15 Sep 2018 09:55:44: #1 finished! INFO @ Sat, 15 Sep 2018 09:55:44: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Sep 2018 09:55:44: #1 finished! INFO @ Sat, 15 Sep 2018 09:55:44: #2 Build Peak Model... INFO @ Sat, 15 Sep 2018 09:55:44: #2 Build Peak Model... INFO @ Sat, 15 Sep 2018 09:55:44: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Sep 2018 09:55:44: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Sep 2018 09:55:44: #2 number of paired peaks: 155 WARNING @ Sat, 15 Sep 2018 09:55:44: Fewer paired peaks (155) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 155 pairs to build model! INFO @ Sat, 15 Sep 2018 09:55:44: start model_add_line... INFO @ Sat, 15 Sep 2018 09:55:44: #2 number of paired peaks: 155 WARNING @ Sat, 15 Sep 2018 09:55:44: Fewer paired peaks (155) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 155 pairs to build model! INFO @ Sat, 15 Sep 2018 09:55:44: start model_add_line... INFO @ Sat, 15 Sep 2018 09:55:44: start X-correlation... INFO @ Sat, 15 Sep 2018 09:55:44: start X-correlation... INFO @ Sat, 15 Sep 2018 09:55:44: #2 number of paired peaks: 155 WARNING @ Sat, 15 Sep 2018 09:55:44: Fewer paired peaks (155) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 155 pairs to build model! INFO @ Sat, 15 Sep 2018 09:55:44: start model_add_line... INFO @ Sat, 15 Sep 2018 09:55:44: start X-correlation... INFO @ Sat, 15 Sep 2018 09:55:44: end of X-cor INFO @ Sat, 15 Sep 2018 09:55:44: end of X-cor INFO @ Sat, 15 Sep 2018 09:55:44: #2 finished! INFO @ Sat, 15 Sep 2018 09:55:44: #2 finished! INFO @ Sat, 15 Sep 2018 09:55:44: #2 predicted fragment length is 322 bps INFO @ Sat, 15 Sep 2018 09:55:44: #2 predicted fragment length is 322 bps INFO @ Sat, 15 Sep 2018 09:55:44: #2 alternative fragment length(s) may be 15,41,71,96,123,153,176,209,236,263,291,322,343,375,404,427,456,489,509,538,569,591 bps INFO @ Sat, 15 Sep 2018 09:55:44: #2 alternative fragment length(s) may be 15,41,71,96,123,153,176,209,236,263,291,322,343,375,404,427,456,489,509,538,569,591 bps INFO @ Sat, 15 Sep 2018 09:55:44: #2.2 Generate R script for model : SRX1924913.20_model.r INFO @ Sat, 15 Sep 2018 09:55:44: #2.2 Generate R script for model : SRX1924913.10_model.r INFO @ Sat, 15 Sep 2018 09:55:44: end of X-cor INFO @ Sat, 15 Sep 2018 09:55:44: #2 finished! INFO @ Sat, 15 Sep 2018 09:55:44: #2 predicted fragment length is 322 bps INFO @ Sat, 15 Sep 2018 09:55:44: #2 alternative fragment length(s) may be 15,41,71,96,123,153,176,209,236,263,291,322,343,375,404,427,456,489,509,538,569,591 bps INFO @ Sat, 15 Sep 2018 09:55:44: #2.2 Generate R script for model : SRX1924913.05_model.r INFO @ Sat, 15 Sep 2018 09:55:44: #3 Call peaks... INFO @ Sat, 15 Sep 2018 09:55:44: #3 Call peaks... INFO @ Sat, 15 Sep 2018 09:55:44: #3 Pre-compute pvalue-qvalue table... INFO @ Sat, 15 Sep 2018 09:55:44: #3 Pre-compute pvalue-qvalue table... INFO @ Sat, 15 Sep 2018 09:55:44: #3 Call peaks... INFO @ Sat, 15 Sep 2018 09:55:44: #3 Pre-compute pvalue-qvalue table... INFO @ Sat, 15 Sep 2018 09:55:45: #3 Call peaks for each chromosome... INFO @ Sat, 15 Sep 2018 09:55:45: #3 Call peaks for each chromosome... INFO @ Sat, 15 Sep 2018 09:55:45: #3 Call peaks for each chromosome... INFO @ Sat, 15 Sep 2018 09:55:45: #4 Write output xls file... SRX1924913.10_peaks.xls INFO @ Sat, 15 Sep 2018 09:55:45: #4 Write peak in narrowPeak format file... SRX1924913.10_peaks.narrowPeak INFO @ Sat, 15 Sep 2018 09:55:45: #4 Write summits bed file... SRX1924913.10_summits.bed INFO @ Sat, 15 Sep 2018 09:55:45: Done! pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) INFO @ Sat, 15 Sep 2018 09:55:45: #4 Write output xls file... SRX1924913.20_peaks.xls CompletedMACS2peakCalling INFO @ Sat, 15 Sep 2018 09:55:45: #4 Write peak in narrowPeak format file... SRX1924913.20_peaks.narrowPeak INFO @ Sat, 15 Sep 2018 09:55:45: #4 Write summits bed file... SRX1924913.20_summits.bed INFO @ Sat, 15 Sep 2018 09:55:45: Done! INFO @ Sat, 15 Sep 2018 09:55:45: #4 Write output xls file... SRX1924913.05_peaks.xls INFO @ Sat, 15 Sep 2018 09:55:45: #4 Write peak in narrowPeak format file... SRX1924913.05_peaks.narrowPeak INFO @ Sat, 15 Sep 2018 09:55:45: #4 Write summits bed file... SRX1924913.05_summits.bed INFO @ Sat, 15 Sep 2018 09:55:45: Done! pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) CompletedMACS2peakCalling pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (10 records, 4 fields): 1 millis CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。