Job ID = 9162250 sra ファイルのダウンロード中... Completed: 640123K bytes transferred in 8 seconds (605650K bits/sec), in 1 file, 2 directories. sra ファイルのダウンロードが完了しました。 Read layout: SINGLE fastq に変換中... Written 18346593 spots for /home/okishinya/chipatlas/results/sacCer3/SRX1791114/SRR3567989.sra Written 18346593 spots total rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:06:06 18346593 reads; of these: 18346593 (100.00%) were unpaired; of these: 797423 (4.35%) aligned 0 times 15133325 (82.49%) aligned exactly 1 time 2415845 (13.17%) aligned >1 times 95.65% overall alignment rate Time searching: 00:06:06 Overall time: 00:06:06 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_sort_core] merging from 8 files... [bam_rmdupse_core] 6047752 / 17549170 = 0.3446 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Wed, 28 Jun 2017 07:13:13: # Command line: callpeak -t SRX1791114.bam -f BAM -g 12100000 -n SRX1791114.05 -q 1e-05 # ARGUMENTS LIST: # name = SRX1791114.05 # format = BAM # ChIP-seq file = ['SRX1791114.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 07:13:13: #1 read tag files... INFO @ Wed, 28 Jun 2017 07:13:13: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 07:13:13: # Command line: callpeak -t SRX1791114.bam -f BAM -g 12100000 -n SRX1791114.10 -q 1e-10 # ARGUMENTS LIST: # name = SRX1791114.10 # format = BAM # ChIP-seq file = ['SRX1791114.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 07:13:13: #1 read tag files... INFO @ Wed, 28 Jun 2017 07:13:13: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 07:13:13: # Command line: callpeak -t SRX1791114.bam -f BAM -g 12100000 -n SRX1791114.20 -q 1e-20 # ARGUMENTS LIST: # name = SRX1791114.20 # format = BAM # ChIP-seq file = ['SRX1791114.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 07:13:13: #1 read tag files... INFO @ Wed, 28 Jun 2017 07:13:13: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 07:13:23: 1000000 INFO @ Wed, 28 Jun 2017 07:13:23: 1000000 INFO @ Wed, 28 Jun 2017 07:13:23: 1000000 INFO @ Wed, 28 Jun 2017 07:13:33: 2000000 INFO @ Wed, 28 Jun 2017 07:13:33: 2000000 INFO @ Wed, 28 Jun 2017 07:13:33: 2000000 INFO @ Wed, 28 Jun 2017 07:13:42: 3000000 INFO @ Wed, 28 Jun 2017 07:13:42: 3000000 INFO @ Wed, 28 Jun 2017 07:13:43: 3000000 INFO @ Wed, 28 Jun 2017 07:13:52: 4000000 INFO @ Wed, 28 Jun 2017 07:13:52: 4000000 INFO @ Wed, 28 Jun 2017 07:13:54: 4000000 INFO @ Wed, 28 Jun 2017 07:14:02: 5000000 INFO @ Wed, 28 Jun 2017 07:14:02: 5000000 INFO @ Wed, 28 Jun 2017 07:14:05: 5000000 INFO @ Wed, 28 Jun 2017 07:14:11: 6000000 INFO @ Wed, 28 Jun 2017 07:14:11: 6000000 INFO @ Wed, 28 Jun 2017 07:14:15: 6000000 INFO @ Wed, 28 Jun 2017 07:14:21: 7000000 INFO @ Wed, 28 Jun 2017 07:14:21: 7000000 INFO @ Wed, 28 Jun 2017 07:14:25: 7000000 INFO @ Wed, 28 Jun 2017 07:14:30: 8000000 INFO @ Wed, 28 Jun 2017 07:14:30: 8000000 INFO @ Wed, 28 Jun 2017 07:14:36: 8000000 INFO @ Wed, 28 Jun 2017 07:14:40: 9000000 INFO @ Wed, 28 Jun 2017 07:14:40: 9000000 INFO @ Wed, 28 Jun 2017 07:14:46: 9000000 INFO @ Wed, 28 Jun 2017 07:14:50: 10000000 INFO @ Wed, 28 Jun 2017 07:14:50: 10000000 INFO @ Wed, 28 Jun 2017 07:14:57: 10000000 INFO @ Wed, 28 Jun 2017 07:14:59: 11000000 INFO @ Wed, 28 Jun 2017 07:14:59: 11000000 INFO @ Wed, 28 Jun 2017 07:15:04: #1 tag size is determined as 51 bps INFO @ Wed, 28 Jun 2017 07:15:04: #1 tag size = 51 INFO @ Wed, 28 Jun 2017 07:15:04: #1 total tags in treatment: 11501418 INFO @ Wed, 28 Jun 2017 07:15:04: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 07:15:04: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 07:15:04: #1 tag size is determined as 51 bps INFO @ Wed, 28 Jun 2017 07:15:04: #1 tag size = 51 INFO @ Wed, 28 Jun 2017 07:15:04: #1 total tags in treatment: 11501418 INFO @ Wed, 28 Jun 2017 07:15:04: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 07:15:04: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 07:15:04: #1 tags after filtering in treatment: 11501418 INFO @ Wed, 28 Jun 2017 07:15:04: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 07:15:04: #1 finished! INFO @ Wed, 28 Jun 2017 07:15:04: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 07:15:04: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 07:15:04: #1 tags after filtering in treatment: 11501418 INFO @ Wed, 28 Jun 2017 07:15:04: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 07:15:04: #1 finished! INFO @ Wed, 28 Jun 2017 07:15:04: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 07:15:04: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 07:15:05: #2 number of paired peaks: 0 WARNING @ Wed, 28 Jun 2017 07:15:05: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 07:15:05: Process for pairing-model is terminated! cat: SRX1791114.10_peaks.narrowPeak: そのようなファイルやディレクトリはありません INFO @ Wed, 28 Jun 2017 07:15:05: #2 number of paired peaks: 0 WARNING @ Wed, 28 Jun 2017 07:15:05: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 07:15:05: Process for pairing-model is terminated! cat: SRX1791114.20_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 0 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) pass1 - making usageList (0 chroms): 1 millis rm: cannot remove `SRX1791114.20_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1791114.20_*.xls': そのようなファイルやディレクトリはありません needLargeMem: trying to allocate 0 bytes (limit: 17179869184)rm: cannot remove `SRX1791114.20_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling rm: cannot remove `SRX1791114.10_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1791114.10_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1791114.10_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Wed, 28 Jun 2017 07:15:07: 11000000 INFO @ Wed, 28 Jun 2017 07:15:13: #1 tag size is determined as 51 bps INFO @ Wed, 28 Jun 2017 07:15:13: #1 tag size = 51 INFO @ Wed, 28 Jun 2017 07:15:13: #1 total tags in treatment: 11501418 INFO @ Wed, 28 Jun 2017 07:15:13: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 07:15:13: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 07:15:13: #1 tags after filtering in treatment: 11501418 INFO @ Wed, 28 Jun 2017 07:15:13: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 07:15:13: #1 finished! INFO @ Wed, 28 Jun 2017 07:15:13: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 07:15:13: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 07:15:13: #2 number of paired peaks: 0 WARNING @ Wed, 28 Jun 2017 07:15:13: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 07:15:13: Process for pairing-model is terminated! cat: SRX1791114.05_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX1791114.05_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1791114.05_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1791114.05_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。