Job ID = 9162161 sra ファイルのダウンロード中... Completed: 1140427K bytes transferred in 12 seconds (771733K bits/sec), in 1 file, 2 directories. sra ファイルのダウンロードが完了しました。 Read layout: SINGLE fastq に変換中... Written 46358465 spots for /home/okishinya/chipatlas/results/sacCer3/SRX1720148/SRR3418379.sra Written 46358465 spots total rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:07:09 46358465 reads; of these: 46358465 (100.00%) were unpaired; of these: 7671075 (16.55%) aligned 0 times 36022987 (77.71%) aligned exactly 1 time 2664403 (5.75%) aligned >1 times 83.45% overall alignment rate Time searching: 00:07:09 Overall time: 00:07:09 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_sort_core] merging from 12 files... [bam_rmdupse_core] 35298802 / 38687390 = 0.9124 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Wed, 28 Jun 2017 06:48:35: # Command line: callpeak -t SRX1720148.bam -f BAM -g 12100000 -n SRX1720148.10 -q 1e-10 # ARGUMENTS LIST: # name = SRX1720148.10 # format = BAM # ChIP-seq file = ['SRX1720148.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 06:48:35: #1 read tag files... INFO @ Wed, 28 Jun 2017 06:48:35: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 06:48:35: # Command line: callpeak -t SRX1720148.bam -f BAM -g 12100000 -n SRX1720148.20 -q 1e-20 # ARGUMENTS LIST: # name = SRX1720148.20 # format = BAM # ChIP-seq file = ['SRX1720148.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 06:48:35: #1 read tag files... INFO @ Wed, 28 Jun 2017 06:48:35: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 06:48:35: # Command line: callpeak -t SRX1720148.bam -f BAM -g 12100000 -n SRX1720148.05 -q 1e-05 # ARGUMENTS LIST: # name = SRX1720148.05 # format = BAM # ChIP-seq file = ['SRX1720148.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 28 Jun 2017 06:48:35: #1 read tag files... INFO @ Wed, 28 Jun 2017 06:48:35: #1 read treatment tags... INFO @ Wed, 28 Jun 2017 06:48:42: 1000000 INFO @ Wed, 28 Jun 2017 06:48:42: 1000000 INFO @ Wed, 28 Jun 2017 06:48:43: 1000000 INFO @ Wed, 28 Jun 2017 06:48:49: 2000000 INFO @ Wed, 28 Jun 2017 06:48:49: 2000000 INFO @ Wed, 28 Jun 2017 06:48:51: 2000000 INFO @ Wed, 28 Jun 2017 06:48:57: 3000000 INFO @ Wed, 28 Jun 2017 06:48:57: 3000000 INFO @ Wed, 28 Jun 2017 06:48:59: 3000000 INFO @ Wed, 28 Jun 2017 06:48:59: #1 tag size is determined as 37 bps INFO @ Wed, 28 Jun 2017 06:48:59: #1 tag size is determined as 37 bps INFO @ Wed, 28 Jun 2017 06:48:59: #1 tag size = 37 INFO @ Wed, 28 Jun 2017 06:48:59: #1 tag size = 37 INFO @ Wed, 28 Jun 2017 06:48:59: #1 total tags in treatment: 3388588 INFO @ Wed, 28 Jun 2017 06:48:59: #1 total tags in treatment: 3388588 INFO @ Wed, 28 Jun 2017 06:48:59: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 06:48:59: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 06:48:59: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 06:48:59: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 06:48:59: #1 tags after filtering in treatment: 3388588 INFO @ Wed, 28 Jun 2017 06:48:59: #1 tags after filtering in treatment: 3388588 INFO @ Wed, 28 Jun 2017 06:48:59: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 06:48:59: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 06:48:59: #1 finished! INFO @ Wed, 28 Jun 2017 06:48:59: #1 finished! INFO @ Wed, 28 Jun 2017 06:48:59: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 06:48:59: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 06:48:59: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 06:48:59: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 06:49:00: #2 number of paired peaks: 0 WARNING @ Wed, 28 Jun 2017 06:49:00: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 06:49:00: Process for pairing-model is terminated! cat: SRX1720148.05_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX1720148.05_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1720148.05_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1720148.05_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Wed, 28 Jun 2017 06:49:00: #2 number of paired peaks: 0 WARNING @ Wed, 28 Jun 2017 06:49:00: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 06:49:00: Process for pairing-model is terminated! cat: SRX1720148.20_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX1720148.20_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1720148.20_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1720148.20_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Wed, 28 Jun 2017 06:49:02: #1 tag size is determined as 37 bps INFO @ Wed, 28 Jun 2017 06:49:02: #1 tag size = 37 INFO @ Wed, 28 Jun 2017 06:49:02: #1 total tags in treatment: 3388588 INFO @ Wed, 28 Jun 2017 06:49:02: #1 user defined the maximum tags... INFO @ Wed, 28 Jun 2017 06:49:02: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 28 Jun 2017 06:49:02: #1 tags after filtering in treatment: 3388588 INFO @ Wed, 28 Jun 2017 06:49:02: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 28 Jun 2017 06:49:02: #1 finished! INFO @ Wed, 28 Jun 2017 06:49:02: #2 Build Peak Model... INFO @ Wed, 28 Jun 2017 06:49:02: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 28 Jun 2017 06:49:02: #2 number of paired peaks: 0 WARNING @ Wed, 28 Jun 2017 06:49:02: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 28 Jun 2017 06:49:02: Process for pairing-model is terminated! cat: SRX1720148.10_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `SRX1720148.10_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1720148.10_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `SRX1720148.10_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。