Job ID = 2008065 sra ファイルのダウンロード中... Read layout: PAIRED fastq に変換中... 2019-07-05T08:20:55 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) spots read : 2,012,683 reads read : 4,025,366 reads written : 4,025,366 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:02:23 2012683 reads; of these: 2012683 (100.00%) were paired; of these: 306868 (15.25%) aligned concordantly 0 times 1567923 (77.90%) aligned concordantly exactly 1 time 137892 (6.85%) aligned concordantly >1 times ---- 306868 pairs aligned concordantly 0 times; of these: 178541 (58.18%) aligned discordantly 1 time ---- 128327 pairs aligned 0 times concordantly or discordantly; of these: 256654 mates make up the pairs; of these: 178308 (69.47%) aligned 0 times 41892 (16.32%) aligned exactly 1 time 36454 (14.20%) aligned >1 times 95.57% overall alignment rate Time searching: 00:02:23 Overall time: 00:02:23 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 11462 / 1870515 = 0.0061 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Fri, 05 Jul 2019 17:33:03: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 17:33:03: #1 read tag files... INFO @ Fri, 05 Jul 2019 17:33:03: #1 read treatment tags... INFO @ Fri, 05 Jul 2019 17:33:04: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 17:33:04: #1 read tag files... INFO @ Fri, 05 Jul 2019 17:33:04: #1 read treatment tags... INFO @ Fri, 05 Jul 2019 17:33:05: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 17:33:05: #1 read tag files... INFO @ Fri, 05 Jul 2019 17:33:05: #1 read treatment tags... INFO @ Fri, 05 Jul 2019 17:33:11: 1000000 INFO @ Fri, 05 Jul 2019 17:33:12: 1000000 INFO @ Fri, 05 Jul 2019 17:33:13: 1000000 INFO @ Fri, 05 Jul 2019 17:33:18: 2000000 INFO @ Fri, 05 Jul 2019 17:33:19: 2000000 INFO @ Fri, 05 Jul 2019 17:33:22: 2000000 INFO @ Fri, 05 Jul 2019 17:33:26: 3000000 INFO @ Fri, 05 Jul 2019 17:33:27: 3000000 INFO @ Fri, 05 Jul 2019 17:33:31: 3000000 INFO @ Fri, 05 Jul 2019 17:33:33: #1 tag size is determined as 100 bps INFO @ Fri, 05 Jul 2019 17:33:33: #1 tag size = 100 INFO @ Fri, 05 Jul 2019 17:33:33: #1 total tags in treatment: 1694840 INFO @ Fri, 05 Jul 2019 17:33:33: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 17:33:33: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 17:33:33: #1 tags after filtering in treatment: 1625542 INFO @ Fri, 05 Jul 2019 17:33:33: #1 Redundant rate of treatment: 0.04 INFO @ Fri, 05 Jul 2019 17:33:33: #1 finished! INFO @ Fri, 05 Jul 2019 17:33:33: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 17:33:33: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 17:33:33: #2 number of paired peaks: 3 WARNING @ Fri, 05 Jul 2019 17:33:33: Too few paired peaks (3) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 05 Jul 2019 17:33:33: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 2 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling INFO @ Fri, 05 Jul 2019 17:33:33: #1 tag size is determined as 100 bps INFO @ Fri, 05 Jul 2019 17:33:33: #1 tag size = 100 INFO @ Fri, 05 Jul 2019 17:33:33: #1 total tags in treatment: 1694840 INFO @ Fri, 05 Jul 2019 17:33:33: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 17:33:33: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 17:33:33: #1 tags after filtering in treatment: 1625542 INFO @ Fri, 05 Jul 2019 17:33:33: #1 Redundant rate of treatment: 0.04 INFO @ Fri, 05 Jul 2019 17:33:33: #1 finished! INFO @ Fri, 05 Jul 2019 17:33:33: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 17:33:33: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 17:33:34: #2 number of paired peaks: 3 WARNING @ Fri, 05 Jul 2019 17:33:34: Too few paired peaks (3) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 05 Jul 2019 17:33:34: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling INFO @ Fri, 05 Jul 2019 17:33:38: #1 tag size is determined as 100 bps INFO @ Fri, 05 Jul 2019 17:33:40: #1 tag size = 100 INFO @ Fri, 05 Jul 2019 17:33:40: #1 total tags in treatment: 1694840 INFO @ Fri, 05 Jul 2019 17:33:40: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 17:33:40: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 17:33:40: #1 tags after filtering in treatment: 1625542 INFO @ Fri, 05 Jul 2019 17:33:40: #1 Redundant rate of treatment: 0.04 INFO @ Fri, 05 Jul 2019 17:33:40: #1 finished! INFO @ Fri, 05 Jul 2019 17:33:40: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 17:33:40: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 17:33:40: #2 number of paired peaks: 3 WARNING @ Fri, 05 Jul 2019 17:33:40: Too few paired peaks (3) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 05 Jul 2019 17:33:40: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX471848/ERX471848.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。