Job ID = 14521781 SRX = ERX4439641 Genome = sacCer3 sra ファイルのダウンロード中... Read layout: PAIRED fastq に変換中... Read 4424033 spots for ERR4501570/ERR4501570.sra Written 4424033 spots for ERR4501570/ERR4501570.sra fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:01:23 4424033 reads; of these: 4424033 (100.00%) were paired; of these: 3492756 (78.95%) aligned concordantly 0 times 840813 (19.01%) aligned concordantly exactly 1 time 90464 (2.04%) aligned concordantly >1 times ---- 3492756 pairs aligned concordantly 0 times; of these: 168147 (4.81%) aligned discordantly 1 time ---- 3324609 pairs aligned 0 times concordantly or discordantly; of these: 6649218 mates make up the pairs; of these: 6571594 (98.83%) aligned 0 times 24128 (0.36%) aligned exactly 1 time 53496 (0.80%) aligned >1 times 25.73% overall alignment rate Time searching: 00:01:23 Overall time: 00:01:23 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 8924 / 1089751 = 0.0082 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 15 Jan 2022 21:41:11: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Jan 2022 21:41:11: #1 read tag files... INFO @ Sat, 15 Jan 2022 21:41:11: #1 read treatment tags... INFO @ Sat, 15 Jan 2022 21:41:19: 1000000 INFO @ Sat, 15 Jan 2022 21:41:28: 2000000 INFO @ Sat, 15 Jan 2022 21:41:30: #1 tag size is determined as 100 bps INFO @ Sat, 15 Jan 2022 21:41:30: #1 tag size = 100 INFO @ Sat, 15 Jan 2022 21:41:30: #1 total tags in treatment: 923811 INFO @ Sat, 15 Jan 2022 21:41:30: #1 user defined the maximum tags... INFO @ Sat, 15 Jan 2022 21:41:30: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Jan 2022 21:41:30: #1 tags after filtering in treatment: 835276 INFO @ Sat, 15 Jan 2022 21:41:30: #1 Redundant rate of treatment: 0.10 INFO @ Sat, 15 Jan 2022 21:41:30: #1 finished! INFO @ Sat, 15 Jan 2022 21:41:30: #2 Build Peak Model... INFO @ Sat, 15 Jan 2022 21:41:30: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Jan 2022 21:41:30: #2 number of paired peaks: 18 WARNING @ Sat, 15 Jan 2022 21:41:30: Too few paired peaks (18) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Jan 2022 21:41:30: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 15 Jan 2022 21:41:41: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Jan 2022 21:41:41: #1 read tag files... INFO @ Sat, 15 Jan 2022 21:41:41: #1 read treatment tags... INFO @ Sat, 15 Jan 2022 21:41:49: 1000000 INFO @ Sat, 15 Jan 2022 21:41:58: 2000000 INFO @ Sat, 15 Jan 2022 21:42:00: #1 tag size is determined as 100 bps INFO @ Sat, 15 Jan 2022 21:42:00: #1 tag size = 100 INFO @ Sat, 15 Jan 2022 21:42:00: #1 total tags in treatment: 923811 INFO @ Sat, 15 Jan 2022 21:42:00: #1 user defined the maximum tags... INFO @ Sat, 15 Jan 2022 21:42:00: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Jan 2022 21:42:00: #1 tags after filtering in treatment: 835276 INFO @ Sat, 15 Jan 2022 21:42:00: #1 Redundant rate of treatment: 0.10 INFO @ Sat, 15 Jan 2022 21:42:00: #1 finished! INFO @ Sat, 15 Jan 2022 21:42:00: #2 Build Peak Model... INFO @ Sat, 15 Jan 2022 21:42:00: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Jan 2022 21:42:00: #2 number of paired peaks: 18 WARNING @ Sat, 15 Jan 2022 21:42:00: Too few paired peaks (18) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Jan 2022 21:42:00: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 0 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 15 Jan 2022 21:42:11: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 15 Jan 2022 21:42:11: #1 read tag files... INFO @ Sat, 15 Jan 2022 21:42:11: #1 read treatment tags... INFO @ Sat, 15 Jan 2022 21:42:19: 1000000 BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。 INFO @ Sat, 15 Jan 2022 21:42:28: 2000000 INFO @ Sat, 15 Jan 2022 21:42:30: #1 tag size is determined as 100 bps INFO @ Sat, 15 Jan 2022 21:42:30: #1 tag size = 100 INFO @ Sat, 15 Jan 2022 21:42:30: #1 total tags in treatment: 923811 INFO @ Sat, 15 Jan 2022 21:42:30: #1 user defined the maximum tags... INFO @ Sat, 15 Jan 2022 21:42:30: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 15 Jan 2022 21:42:30: #1 tags after filtering in treatment: 835276 INFO @ Sat, 15 Jan 2022 21:42:30: #1 Redundant rate of treatment: 0.10 INFO @ Sat, 15 Jan 2022 21:42:30: #1 finished! INFO @ Sat, 15 Jan 2022 21:42:30: #2 Build Peak Model... INFO @ Sat, 15 Jan 2022 21:42:30: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 15 Jan 2022 21:42:30: #2 number of paired peaks: 18 WARNING @ Sat, 15 Jan 2022 21:42:30: Too few paired peaks (18) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 15 Jan 2022 21:42:30: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/ERX4439641/ERX4439641.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling