Job ID = 2007673 sra ファイルのダウンロード中... Read layout: PAIRED fastq に変換中... 2019-07-05T07:17:16 fasterq-dump.2.9.6 err: index.c get_nearest_offset() -> too many rounds pos = 24 of 40 2019-07-05T07:17:16 fasterq-dump.2.9.6 err: index.c get_nearest_offset() -> too many rounds pos = 24 of 40 spots read : 17,719 reads read : 35,438 reads written : 35,438 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:00:00 17719 reads; of these: 17719 (100.00%) were paired; of these: 2434 (13.74%) aligned concordantly 0 times 14215 (80.22%) aligned concordantly exactly 1 time 1070 (6.04%) aligned concordantly >1 times ---- 2434 pairs aligned concordantly 0 times; of these: 1158 (47.58%) aligned discordantly 1 time ---- 1276 pairs aligned 0 times concordantly or discordantly; of these: 2552 mates make up the pairs; of these: 2050 (80.33%) aligned 0 times 300 (11.76%) aligned exactly 1 time 202 (7.92%) aligned >1 times 94.22% overall alignment rate Time searching: 00:00:00 Overall time: 00:00:00 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 27 / 16305 = 0.0017 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Fri, 05 Jul 2019 16:17:33: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 16:17:33: #1 read tag files... INFO @ Fri, 05 Jul 2019 16:17:33: #1 read treatment tags... BedGraph に変換しました。 BigWig に変換中... INFO @ Fri, 05 Jul 2019 16:17:33: #1 tag size is determined as 25 bps INFO @ Fri, 05 Jul 2019 16:17:33: #1 tag size = 25 INFO @ Fri, 05 Jul 2019 16:17:33: #1 total tags in treatment: 15259 INFO @ Fri, 05 Jul 2019 16:17:33: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 16:17:33: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 16:17:33: #1 tags after filtering in treatment: 15249 INFO @ Fri, 05 Jul 2019 16:17:33: #1 Redundant rate of treatment: 0.00 INFO @ Fri, 05 Jul 2019 16:17:33: #1 finished! INFO @ Fri, 05 Jul 2019 16:17:33: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 16:17:33: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 16:17:33: #2 number of paired peaks: 362 WARNING @ Fri, 05 Jul 2019 16:17:33: Fewer paired peaks (362) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 362 pairs to build model! INFO @ Fri, 05 Jul 2019 16:17:33: start model_add_line... INFO @ Fri, 05 Jul 2019 16:17:33: start X-correlation... INFO @ Fri, 05 Jul 2019 16:17:33: end of X-cor INFO @ Fri, 05 Jul 2019 16:17:33: #2 finished! INFO @ Fri, 05 Jul 2019 16:17:33: #2 predicted fragment length is 302 bps INFO @ Fri, 05 Jul 2019 16:17:33: #2 alternative fragment length(s) may be 61,225,254,270,302 bps INFO @ Fri, 05 Jul 2019 16:17:33: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.05_model.r INFO @ Fri, 05 Jul 2019 16:17:33: #3 Call peaks... INFO @ Fri, 05 Jul 2019 16:17:33: #3 Pre-compute pvalue-qvalue table... INFO @ Fri, 05 Jul 2019 16:17:33: #3 Call peaks for each chromosome... BigWig に変換しました。 INFO @ Fri, 05 Jul 2019 16:17:33: #4 Write output xls file... /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.05_peaks.xls INFO @ Fri, 05 Jul 2019 16:17:33: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.05_peaks.narrowPeak INFO @ Fri, 05 Jul 2019 16:17:33: #4 Write summits bed file... /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.05_summits.bed INFO @ Fri, 05 Jul 2019 16:17:33: Done! pass1 - making usageList (0 chroms): 411 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) INFO @ Fri, 05 Jul 2019 16:17:34: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 16:17:34: #1 read tag files... INFO @ Fri, 05 Jul 2019 16:17:34: #1 read treatment tags... INFO @ Fri, 05 Jul 2019 16:17:34: #1 tag size is determined as 25 bps INFO @ Fri, 05 Jul 2019 16:17:34: #1 tag size = 25 INFO @ Fri, 05 Jul 2019 16:17:34: #1 total tags in treatment: 15259 INFO @ Fri, 05 Jul 2019 16:17:34: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 16:17:34: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 16:17:34: #1 tags after filtering in treatment: 15249 INFO @ Fri, 05 Jul 2019 16:17:34: #1 Redundant rate of treatment: 0.00 INFO @ Fri, 05 Jul 2019 16:17:34: #1 finished! INFO @ Fri, 05 Jul 2019 16:17:34: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 16:17:34: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 16:17:34: #2 number of paired peaks: 362 WARNING @ Fri, 05 Jul 2019 16:17:34: Fewer paired peaks (362) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 362 pairs to build model! INFO @ Fri, 05 Jul 2019 16:17:34: start model_add_line... INFO @ Fri, 05 Jul 2019 16:17:34: start X-correlation... INFO @ Fri, 05 Jul 2019 16:17:34: end of X-cor INFO @ Fri, 05 Jul 2019 16:17:34: #2 finished! INFO @ Fri, 05 Jul 2019 16:17:34: #2 predicted fragment length is 302 bps INFO @ Fri, 05 Jul 2019 16:17:34: #2 alternative fragment length(s) may be 61,225,254,270,302 bps INFO @ Fri, 05 Jul 2019 16:17:34: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.10_model.r INFO @ Fri, 05 Jul 2019 16:17:34: #3 Call peaks... INFO @ Fri, 05 Jul 2019 16:17:34: #3 Pre-compute pvalue-qvalue table... INFO @ Fri, 05 Jul 2019 16:17:34: #3 Call peaks for each chromosome... INFO @ Fri, 05 Jul 2019 16:17:34: #4 Write output xls file... /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.10_peaks.xls INFO @ Fri, 05 Jul 2019 16:17:34: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.10_peaks.narrowPeak INFO @ Fri, 05 Jul 2019 16:17:34: #4 Write summits bed file... /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.10_summits.bed INFO @ Fri, 05 Jul 2019 16:17:34: Done! CompletedMACS2peakCalling INFO @ Fri, 05 Jul 2019 16:17:35: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 16:17:35: #1 read tag files... INFO @ Fri, 05 Jul 2019 16:17:35: #1 read treatment tags... pass1 - making usageList (0 chroms): 425 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) INFO @ Fri, 05 Jul 2019 16:17:35: #1 tag size is determined as 25 bps INFO @ Fri, 05 Jul 2019 16:17:35: #1 tag size = 25 INFO @ Fri, 05 Jul 2019 16:17:35: #1 total tags in treatment: 15259 INFO @ Fri, 05 Jul 2019 16:17:35: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 16:17:35: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 16:17:35: #1 tags after filtering in treatment: 15249 INFO @ Fri, 05 Jul 2019 16:17:35: #1 Redundant rate of treatment: 0.00 INFO @ Fri, 05 Jul 2019 16:17:35: #1 finished! INFO @ Fri, 05 Jul 2019 16:17:35: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 16:17:35: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 16:17:35: #2 number of paired peaks: 362 WARNING @ Fri, 05 Jul 2019 16:17:35: Fewer paired peaks (362) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 362 pairs to build model! INFO @ Fri, 05 Jul 2019 16:17:35: start model_add_line... INFO @ Fri, 05 Jul 2019 16:17:35: start X-correlation... INFO @ Fri, 05 Jul 2019 16:17:35: end of X-cor INFO @ Fri, 05 Jul 2019 16:17:35: #2 finished! INFO @ Fri, 05 Jul 2019 16:17:35: #2 predicted fragment length is 302 bps INFO @ Fri, 05 Jul 2019 16:17:35: #2 alternative fragment length(s) may be 61,225,254,270,302 bps INFO @ Fri, 05 Jul 2019 16:17:35: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.20_model.r INFO @ Fri, 05 Jul 2019 16:17:35: #3 Call peaks... INFO @ Fri, 05 Jul 2019 16:17:35: #3 Pre-compute pvalue-qvalue table... CompletedMACS2peakCalling INFO @ Fri, 05 Jul 2019 16:17:35: #3 Call peaks for each chromosome... INFO @ Fri, 05 Jul 2019 16:17:35: #4 Write output xls file... /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.20_peaks.xls INFO @ Fri, 05 Jul 2019 16:17:35: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.20_peaks.narrowPeak INFO @ Fri, 05 Jul 2019 16:17:35: #4 Write summits bed file... /home/okishinya/chipatlas/results/sacCer3/ERX433650/ERX433650.20_summits.bed INFO @ Fri, 05 Jul 2019 16:17:35: Done! pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) CompletedMACS2peakCalling