Job ID = 2007233 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... spots read : 1,679,039 reads read : 1,679,039 reads written : 1,679,039 spots read : 1,588,066 reads read : 1,588,066 reads written : 1,588,066 spots read : 1,575,256 reads read : 1,575,256 reads written : 1,575,256 spots read : 1,515,493 reads read : 1,515,493 reads written : 1,515,493 rm: cannot remove ‘/home/okishinya/ncbi/public/sra/ERR2529654.sra.cache’: No such file or directory rm: cannot remove ‘/home/okishinya/ncbi/public/sra/ERR2529656.sra.cache’: No such file or directory rm: cannot remove ‘/home/okishinya/ncbi/public/sra/ERR2529657.sra.cache’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:02:51 6357854 reads; of these: 6357854 (100.00%) were unpaired; of these: 348166 (5.48%) aligned 0 times 5340351 (84.00%) aligned exactly 1 time 669337 (10.53%) aligned >1 times 94.52% overall alignment rate Time searching: 00:02:51 Overall time: 00:02:51 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdupse_core] 5821705 / 6009688 = 0.9687 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Fri, 05 Jul 2019 15:58:19: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 15:58:19: #1 read tag files... INFO @ Fri, 05 Jul 2019 15:58:19: #1 read treatment tags... INFO @ Fri, 05 Jul 2019 15:58:20: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 15:58:20: #1 read tag files... INFO @ Fri, 05 Jul 2019 15:58:20: #1 read treatment tags... INFO @ Fri, 05 Jul 2019 15:58:20: #1 tag size is determined as 75 bps INFO @ Fri, 05 Jul 2019 15:58:20: #1 tag size = 75 INFO @ Fri, 05 Jul 2019 15:58:20: #1 total tags in treatment: 187983 INFO @ Fri, 05 Jul 2019 15:58:20: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 15:58:20: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 15:58:20: #1 tags after filtering in treatment: 187983 INFO @ Fri, 05 Jul 2019 15:58:20: #1 Redundant rate of treatment: 0.00 INFO @ Fri, 05 Jul 2019 15:58:20: #1 finished! INFO @ Fri, 05 Jul 2019 15:58:20: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 15:58:20: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 15:58:20: #2 number of paired peaks: 378 WARNING @ Fri, 05 Jul 2019 15:58:20: Fewer paired peaks (378) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 378 pairs to build model! INFO @ Fri, 05 Jul 2019 15:58:20: start model_add_line... INFO @ Fri, 05 Jul 2019 15:58:20: start X-correlation... INFO @ Fri, 05 Jul 2019 15:58:20: end of X-cor INFO @ Fri, 05 Jul 2019 15:58:20: #2 finished! INFO @ Fri, 05 Jul 2019 15:58:20: #2 predicted fragment length is 136 bps INFO @ Fri, 05 Jul 2019 15:58:20: #2 alternative fragment length(s) may be 124,136,181,556,597 bps INFO @ Fri, 05 Jul 2019 15:58:20: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.05_model.r WARNING @ Fri, 05 Jul 2019 15:58:20: #2 Since the d (136) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Fri, 05 Jul 2019 15:58:20: #2 You may need to consider one of the other alternative d(s): 124,136,181,556,597 WARNING @ Fri, 05 Jul 2019 15:58:20: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Fri, 05 Jul 2019 15:58:20: #3 Call peaks... INFO @ Fri, 05 Jul 2019 15:58:20: #3 Pre-compute pvalue-qvalue table... INFO @ Fri, 05 Jul 2019 15:58:21: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 05 Jul 2019 15:58:21: #1 read tag files... INFO @ Fri, 05 Jul 2019 15:58:21: #1 read treatment tags... INFO @ Fri, 05 Jul 2019 15:58:21: #3 Call peaks for each chromosome... INFO @ Fri, 05 Jul 2019 15:58:21: #1 tag size is determined as 75 bps INFO @ Fri, 05 Jul 2019 15:58:21: #1 tag size = 75 INFO @ Fri, 05 Jul 2019 15:58:21: #1 total tags in treatment: 187983 INFO @ Fri, 05 Jul 2019 15:58:21: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 15:58:21: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 15:58:21: #1 tags after filtering in treatment: 187983 INFO @ Fri, 05 Jul 2019 15:58:21: #1 Redundant rate of treatment: 0.00 INFO @ Fri, 05 Jul 2019 15:58:21: #1 finished! INFO @ Fri, 05 Jul 2019 15:58:21: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 15:58:21: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 15:58:21: #2 number of paired peaks: 378 WARNING @ Fri, 05 Jul 2019 15:58:21: Fewer paired peaks (378) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 378 pairs to build model! INFO @ Fri, 05 Jul 2019 15:58:21: start model_add_line... INFO @ Fri, 05 Jul 2019 15:58:21: start X-correlation... INFO @ Fri, 05 Jul 2019 15:58:21: end of X-cor INFO @ Fri, 05 Jul 2019 15:58:21: #2 finished! INFO @ Fri, 05 Jul 2019 15:58:21: #2 predicted fragment length is 136 bps INFO @ Fri, 05 Jul 2019 15:58:21: #2 alternative fragment length(s) may be 124,136,181,556,597 bps INFO @ Fri, 05 Jul 2019 15:58:21: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.10_model.r WARNING @ Fri, 05 Jul 2019 15:58:21: #2 Since the d (136) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Fri, 05 Jul 2019 15:58:21: #2 You may need to consider one of the other alternative d(s): 124,136,181,556,597 WARNING @ Fri, 05 Jul 2019 15:58:21: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Fri, 05 Jul 2019 15:58:21: #3 Call peaks... INFO @ Fri, 05 Jul 2019 15:58:21: #3 Pre-compute pvalue-qvalue table... INFO @ Fri, 05 Jul 2019 15:58:21: #4 Write output xls file... /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.05_peaks.xls INFO @ Fri, 05 Jul 2019 15:58:21: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.05_peaks.narrowPeak INFO @ Fri, 05 Jul 2019 15:58:21: #4 Write summits bed file... /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.05_summits.bed INFO @ Fri, 05 Jul 2019 15:58:21: Done! pass1 - making usageList (16 chroms): 1 millis pass2 - checking and writing primary data (112 records, 4 fields): 3 millis INFO @ Fri, 05 Jul 2019 15:58:22: #3 Call peaks for each chromosome... INFO @ Fri, 05 Jul 2019 15:58:22: #1 tag size is determined as 75 bps INFO @ Fri, 05 Jul 2019 15:58:22: #1 tag size = 75 INFO @ Fri, 05 Jul 2019 15:58:22: #1 total tags in treatment: 187983 INFO @ Fri, 05 Jul 2019 15:58:22: #1 user defined the maximum tags... INFO @ Fri, 05 Jul 2019 15:58:22: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 05 Jul 2019 15:58:22: #1 tags after filtering in treatment: 187983 INFO @ Fri, 05 Jul 2019 15:58:22: #1 Redundant rate of treatment: 0.00 INFO @ Fri, 05 Jul 2019 15:58:22: #1 finished! INFO @ Fri, 05 Jul 2019 15:58:22: #2 Build Peak Model... INFO @ Fri, 05 Jul 2019 15:58:22: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 05 Jul 2019 15:58:22: #2 number of paired peaks: 378 WARNING @ Fri, 05 Jul 2019 15:58:22: Fewer paired peaks (378) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 378 pairs to build model! INFO @ Fri, 05 Jul 2019 15:58:22: start model_add_line... INFO @ Fri, 05 Jul 2019 15:58:22: start X-correlation... INFO @ Fri, 05 Jul 2019 15:58:22: end of X-cor INFO @ Fri, 05 Jul 2019 15:58:22: #2 finished! INFO @ Fri, 05 Jul 2019 15:58:22: #2 predicted fragment length is 136 bps INFO @ Fri, 05 Jul 2019 15:58:22: #2 alternative fragment length(s) may be 124,136,181,556,597 bps INFO @ Fri, 05 Jul 2019 15:58:22: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.20_model.r WARNING @ Fri, 05 Jul 2019 15:58:22: #2 Since the d (136) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Fri, 05 Jul 2019 15:58:22: #2 You may need to consider one of the other alternative d(s): 124,136,181,556,597 WARNING @ Fri, 05 Jul 2019 15:58:22: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Fri, 05 Jul 2019 15:58:22: #3 Call peaks... INFO @ Fri, 05 Jul 2019 15:58:22: #3 Pre-compute pvalue-qvalue table... INFO @ Fri, 05 Jul 2019 15:58:22: #4 Write output xls file... /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.10_peaks.xls INFO @ Fri, 05 Jul 2019 15:58:22: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.10_peaks.narrowPeak INFO @ Fri, 05 Jul 2019 15:58:22: #4 Write summits bed file... /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.10_summits.bed INFO @ Fri, 05 Jul 2019 15:58:22: Done! pass1 - making usageList (12 chroms): 1 millis pass2 - checking and writing primary data (37 records, 4 fields): 1 millis INFO @ Fri, 05 Jul 2019 15:58:23: #3 Call peaks for each chromosome... INFO @ Fri, 05 Jul 2019 15:58:23: #4 Write output xls file... /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.20_peaks.xls INFO @ Fri, 05 Jul 2019 15:58:23: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.20_peaks.narrowPeak INFO @ Fri, 05 Jul 2019 15:58:23: #4 Write summits bed file... /home/okishinya/chipatlas/results/sacCer3/ERX2548203/ERX2548203.20_summits.bed INFO @ Fri, 05 Jul 2019 15:58:23: Done! pass1 - making usageList (7 chroms): 1 millis pass2 - checking and writing primary data (17 records, 4 fields): 2 millis CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... CompletedMACS2peakCalling BigWig に変換しました。 CompletedMACS2peakCalling