Job ID = 11633611 sra ファイルのダウンロード中... Completed: 282403K bytes transferred in 6 seconds (335097K bits/sec), in 1 file. sra ファイルのダウンロードが完了しました。 Read layout: PAIRED fastq に変換中... Read 4000000 spots for /home/okishinya/chipatlas/results/sacCer3/ERX1420230/ERR1348706.sra Written 4000000 spots for /home/okishinya/chipatlas/results/sacCer3/ERX1420230/ERR1348706.sra rm: cannot remove `[DSE]RX*': そのようなファイルやディレクトリはありません rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:00:57 4000000 reads; of these: 4000000 (100.00%) were paired; of these: 3777796 (94.44%) aligned concordantly 0 times 198651 (4.97%) aligned concordantly exactly 1 time 23553 (0.59%) aligned concordantly >1 times ---- 3777796 pairs aligned concordantly 0 times; of these: 207399 (5.49%) aligned discordantly 1 time ---- 3570397 pairs aligned 0 times concordantly or discordantly; of these: 7140794 mates make up the pairs; of these: 6896139 (96.57%) aligned 0 times 186614 (2.61%) aligned exactly 1 time 58041 (0.81%) aligned >1 times 13.80% overall alignment rate Time searching: 00:00:57 Overall time: 00:00:57 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 112151 / 297970 = 0.3764 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Fri, 15 Feb 2019 09:05:24: # Command line: callpeak -t ERX1420230.bam -f BAM -g 12100000 -n ERX1420230.05 -q 1e-05 # ARGUMENTS LIST: # name = ERX1420230.05 # format = BAM # ChIP-seq file = ['ERX1420230.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 15 Feb 2019 09:05:24: #1 read tag files... INFO @ Fri, 15 Feb 2019 09:05:24: #1 read treatment tags... INFO @ Fri, 15 Feb 2019 09:05:24: # Command line: callpeak -t ERX1420230.bam -f BAM -g 12100000 -n ERX1420230.20 -q 1e-20 # ARGUMENTS LIST: # name = ERX1420230.20 # format = BAM # ChIP-seq file = ['ERX1420230.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 15 Feb 2019 09:05:24: #1 read tag files... INFO @ Fri, 15 Feb 2019 09:05:24: #1 read treatment tags... INFO @ Fri, 15 Feb 2019 09:05:24: # Command line: callpeak -t ERX1420230.bam -f BAM -g 12100000 -n ERX1420230.10 -q 1e-10 # ARGUMENTS LIST: # name = ERX1420230.10 # format = BAM # ChIP-seq file = ['ERX1420230.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 15 Feb 2019 09:05:24: #1 read tag files... INFO @ Fri, 15 Feb 2019 09:05:24: #1 read treatment tags... INFO @ Fri, 15 Feb 2019 09:05:29: #1 tag size is determined as 51 bps INFO @ Fri, 15 Feb 2019 09:05:29: #1 tag size = 51 INFO @ Fri, 15 Feb 2019 09:05:29: #1 total tags in treatment: 137573 INFO @ Fri, 15 Feb 2019 09:05:29: #1 user defined the maximum tags... INFO @ Fri, 15 Feb 2019 09:05:29: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 15 Feb 2019 09:05:29: #1 tags after filtering in treatment: 131638 INFO @ Fri, 15 Feb 2019 09:05:29: #1 Redundant rate of treatment: 0.04 INFO @ Fri, 15 Feb 2019 09:05:29: #1 finished! INFO @ Fri, 15 Feb 2019 09:05:29: #2 Build Peak Model... INFO @ Fri, 15 Feb 2019 09:05:29: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 15 Feb 2019 09:05:29: #2 number of paired peaks: 139 WARNING @ Fri, 15 Feb 2019 09:05:29: Fewer paired peaks (139) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 139 pairs to build model! INFO @ Fri, 15 Feb 2019 09:05:29: start model_add_line... INFO @ Fri, 15 Feb 2019 09:05:29: start X-correlation... INFO @ Fri, 15 Feb 2019 09:05:29: end of X-cor INFO @ Fri, 15 Feb 2019 09:05:29: #2 finished! INFO @ Fri, 15 Feb 2019 09:05:29: #2 predicted fragment length is 333 bps INFO @ Fri, 15 Feb 2019 09:05:29: #2 alternative fragment length(s) may be 0,71,204,237,303,333,388 bps INFO @ Fri, 15 Feb 2019 09:05:29: #2.2 Generate R script for model : ERX1420230.10_model.r INFO @ Fri, 15 Feb 2019 09:05:29: #3 Call peaks... INFO @ Fri, 15 Feb 2019 09:05:29: #3 Pre-compute pvalue-qvalue table... INFO @ Fri, 15 Feb 2019 09:05:29: #1 tag size is determined as 51 bps INFO @ Fri, 15 Feb 2019 09:05:29: #1 tag size = 51 INFO @ Fri, 15 Feb 2019 09:05:29: #1 total tags in treatment: 137573 INFO @ Fri, 15 Feb 2019 09:05:29: #1 user defined the maximum tags... INFO @ Fri, 15 Feb 2019 09:05:29: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 15 Feb 2019 09:05:29: #1 tag size is determined as 51 bps INFO @ Fri, 15 Feb 2019 09:05:29: #1 tag size = 51 INFO @ Fri, 15 Feb 2019 09:05:29: #1 total tags in treatment: 137573 INFO @ Fri, 15 Feb 2019 09:05:29: #1 user defined the maximum tags... INFO @ Fri, 15 Feb 2019 09:05:29: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 15 Feb 2019 09:05:29: #1 tags after filtering in treatment: 131638 INFO @ Fri, 15 Feb 2019 09:05:29: #1 Redundant rate of treatment: 0.04 INFO @ Fri, 15 Feb 2019 09:05:29: #1 finished! INFO @ Fri, 15 Feb 2019 09:05:29: #2 Build Peak Model... INFO @ Fri, 15 Feb 2019 09:05:29: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 15 Feb 2019 09:05:29: #1 tags after filtering in treatment: 131638 INFO @ Fri, 15 Feb 2019 09:05:29: #1 Redundant rate of treatment: 0.04 INFO @ Fri, 15 Feb 2019 09:05:29: #1 finished! INFO @ Fri, 15 Feb 2019 09:05:29: #2 Build Peak Model... INFO @ Fri, 15 Feb 2019 09:05:29: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 15 Feb 2019 09:05:29: #2 number of paired peaks: 139 WARNING @ Fri, 15 Feb 2019 09:05:29: Fewer paired peaks (139) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 139 pairs to build model! INFO @ Fri, 15 Feb 2019 09:05:29: start model_add_line... INFO @ Fri, 15 Feb 2019 09:05:29: start X-correlation... INFO @ Fri, 15 Feb 2019 09:05:29: #2 number of paired peaks: 139 WARNING @ Fri, 15 Feb 2019 09:05:29: Fewer paired peaks (139) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 139 pairs to build model! INFO @ Fri, 15 Feb 2019 09:05:29: start model_add_line... INFO @ Fri, 15 Feb 2019 09:05:29: start X-correlation... INFO @ Fri, 15 Feb 2019 09:05:29: end of X-cor INFO @ Fri, 15 Feb 2019 09:05:29: #2 finished! INFO @ Fri, 15 Feb 2019 09:05:29: #2 predicted fragment length is 333 bps INFO @ Fri, 15 Feb 2019 09:05:29: #2 alternative fragment length(s) may be 0,71,204,237,303,333,388 bps INFO @ Fri, 15 Feb 2019 09:05:29: #2.2 Generate R script for model : ERX1420230.20_model.r INFO @ Fri, 15 Feb 2019 09:05:29: end of X-cor INFO @ Fri, 15 Feb 2019 09:05:29: #2 finished! INFO @ Fri, 15 Feb 2019 09:05:29: #2 predicted fragment length is 333 bps INFO @ Fri, 15 Feb 2019 09:05:29: #2 alternative fragment length(s) may be 0,71,204,237,303,333,388 bps INFO @ Fri, 15 Feb 2019 09:05:29: #2.2 Generate R script for model : ERX1420230.05_model.r INFO @ Fri, 15 Feb 2019 09:05:29: #3 Call peaks... INFO @ Fri, 15 Feb 2019 09:05:29: #3 Pre-compute pvalue-qvalue table... INFO @ Fri, 15 Feb 2019 09:05:29: #3 Call peaks... INFO @ Fri, 15 Feb 2019 09:05:29: #3 Pre-compute pvalue-qvalue table... INFO @ Fri, 15 Feb 2019 09:05:29: #3 Call peaks for each chromosome... INFO @ Fri, 15 Feb 2019 09:05:29: #3 Call peaks for each chromosome... INFO @ Fri, 15 Feb 2019 09:05:29: #3 Call peaks for each chromosome... INFO @ Fri, 15 Feb 2019 09:05:29: #4 Write output xls file... ERX1420230.10_peaks.xls INFO @ Fri, 15 Feb 2019 09:05:29: #4 Write peak in narrowPeak format file... ERX1420230.10_peaks.narrowPeak INFO @ Fri, 15 Feb 2019 09:05:29: #4 Write summits bed file... ERX1420230.10_summits.bed INFO @ Fri, 15 Feb 2019 09:05:29: Done! pass1 - making usageList (11 chroms): 3 millis pass2 - checking and writing primary data (22 records, 4 fields): 3 millis CompletedMACS2peakCalling INFO @ Fri, 15 Feb 2019 09:05:29: #4 Write output xls file... ERX1420230.05_peaks.xls INFO @ Fri, 15 Feb 2019 09:05:29: #4 Write peak in narrowPeak format file... ERX1420230.05_peaks.narrowPeak INFO @ Fri, 15 Feb 2019 09:05:29: #4 Write summits bed file... ERX1420230.05_summits.bed INFO @ Fri, 15 Feb 2019 09:05:29: Done! INFO @ Fri, 15 Feb 2019 09:05:29: #4 Write output xls file... ERX1420230.20_peaks.xls INFO @ Fri, 15 Feb 2019 09:05:29: #4 Write peak in narrowPeak format file... ERX1420230.20_peaks.narrowPeak INFO @ Fri, 15 Feb 2019 09:05:29: #4 Write summits bed file... ERX1420230.20_summits.bed INFO @ Fri, 15 Feb 2019 09:05:29: Done! pass1 - making usageList (15 chroms): 2 millis pass2 - checking and writing primary data (62 records, 4 fields): 3 millis CompletedMACS2peakCalling pass1 - making usageList (4 chroms): 1 millis pass2 - checking and writing primary data (4 records, 4 fields): 3 millis CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。