Job ID = 11633189 sra ファイルのダウンロード中... Completed: 280176K bytes transferred in 6 seconds (345762K bits/sec), in 1 file. sra ファイルのダウンロードが完了しました。 Read layout: PAIRED fastq に変換中... Read 4000000 spots for /home/okishinya/chipatlas/results/sacCer3/ERX1174125/ERR1094639.sra Written 4000000 spots for /home/okishinya/chipatlas/results/sacCer3/ERX1174125/ERR1094639.sra rm: cannot remove `[DSE]RX*': そのようなファイルやディレクトリはありません rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:02:44 4000000 reads; of these: 4000000 (100.00%) were paired; of these: 293056 (7.33%) aligned concordantly 0 times 3492634 (87.32%) aligned concordantly exactly 1 time 214310 (5.36%) aligned concordantly >1 times ---- 293056 pairs aligned concordantly 0 times; of these: 38711 (13.21%) aligned discordantly 1 time ---- 254345 pairs aligned 0 times concordantly or discordantly; of these: 508690 mates make up the pairs; of these: 435710 (85.65%) aligned 0 times 63027 (12.39%) aligned exactly 1 time 9953 (1.96%) aligned >1 times 94.55% overall alignment rate Time searching: 00:02:44 Overall time: 00:02:44 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 253575 / 3744545 = 0.0677 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Fri, 15 Feb 2019 08:32:30: # Command line: callpeak -t ERX1174125.bam -f BAM -g 12100000 -n ERX1174125.10 -q 1e-10 # ARGUMENTS LIST: # name = ERX1174125.10 # format = BAM # ChIP-seq file = ['ERX1174125.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 15 Feb 2019 08:32:30: #1 read tag files... INFO @ Fri, 15 Feb 2019 08:32:30: #1 read treatment tags... INFO @ Fri, 15 Feb 2019 08:32:30: # Command line: callpeak -t ERX1174125.bam -f BAM -g 12100000 -n ERX1174125.05 -q 1e-05 # ARGUMENTS LIST: # name = ERX1174125.05 # format = BAM # ChIP-seq file = ['ERX1174125.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 15 Feb 2019 08:32:30: #1 read tag files... INFO @ Fri, 15 Feb 2019 08:32:30: #1 read treatment tags... INFO @ Fri, 15 Feb 2019 08:32:30: # Command line: callpeak -t ERX1174125.bam -f BAM -g 12100000 -n ERX1174125.20 -q 1e-20 # ARGUMENTS LIST: # name = ERX1174125.20 # format = BAM # ChIP-seq file = ['ERX1174125.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 15 Feb 2019 08:32:30: #1 read tag files... INFO @ Fri, 15 Feb 2019 08:32:30: #1 read treatment tags... INFO @ Fri, 15 Feb 2019 08:32:36: 1000000 INFO @ Fri, 15 Feb 2019 08:32:38: 1000000 INFO @ Fri, 15 Feb 2019 08:32:38: 1000000 INFO @ Fri, 15 Feb 2019 08:32:43: 2000000 INFO @ Fri, 15 Feb 2019 08:32:45: 2000000 INFO @ Fri, 15 Feb 2019 08:32:45: 2000000 INFO @ Fri, 15 Feb 2019 08:32:49: 3000000 INFO @ Fri, 15 Feb 2019 08:32:52: 3000000 INFO @ Fri, 15 Feb 2019 08:32:52: 3000000 INFO @ Fri, 15 Feb 2019 08:32:55: 4000000 INFO @ Fri, 15 Feb 2019 08:32:59: 4000000 INFO @ Fri, 15 Feb 2019 08:32:59: 4000000 INFO @ Fri, 15 Feb 2019 08:33:02: 5000000 INFO @ Fri, 15 Feb 2019 08:33:05: 5000000 INFO @ Fri, 15 Feb 2019 08:33:05: 5000000 INFO @ Fri, 15 Feb 2019 08:33:08: 6000000 INFO @ Fri, 15 Feb 2019 08:33:12: 6000000 INFO @ Fri, 15 Feb 2019 08:33:12: 6000000 INFO @ Fri, 15 Feb 2019 08:33:14: 7000000 INFO @ Fri, 15 Feb 2019 08:33:14: #1 tag size is determined as 51 bps INFO @ Fri, 15 Feb 2019 08:33:14: #1 tag size = 51 INFO @ Fri, 15 Feb 2019 08:33:14: #1 total tags in treatment: 3454961 INFO @ Fri, 15 Feb 2019 08:33:14: #1 user defined the maximum tags... INFO @ Fri, 15 Feb 2019 08:33:14: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 15 Feb 2019 08:33:15: #1 tags after filtering in treatment: 3113844 INFO @ Fri, 15 Feb 2019 08:33:15: #1 Redundant rate of treatment: 0.10 INFO @ Fri, 15 Feb 2019 08:33:15: #1 finished! INFO @ Fri, 15 Feb 2019 08:33:15: #2 Build Peak Model... INFO @ Fri, 15 Feb 2019 08:33:15: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 15 Feb 2019 08:33:15: #2 number of paired peaks: 4 WARNING @ Fri, 15 Feb 2019 08:33:15: Too few paired peaks (4) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 15 Feb 2019 08:33:15: Process for pairing-model is terminated! cat: ERX1174125.20_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 2 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `ERX1174125.20_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `ERX1174125.20_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `ERX1174125.20_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Fri, 15 Feb 2019 08:33:20: 7000000 INFO @ Fri, 15 Feb 2019 08:33:20: 7000000 INFO @ Fri, 15 Feb 2019 08:33:20: #1 tag size is determined as 51 bps INFO @ Fri, 15 Feb 2019 08:33:20: #1 tag size = 51 INFO @ Fri, 15 Feb 2019 08:33:20: #1 total tags in treatment: 3454961 INFO @ Fri, 15 Feb 2019 08:33:20: #1 user defined the maximum tags... INFO @ Fri, 15 Feb 2019 08:33:20: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 15 Feb 2019 08:33:20: #1 tag size is determined as 51 bps INFO @ Fri, 15 Feb 2019 08:33:20: #1 tag size = 51 INFO @ Fri, 15 Feb 2019 08:33:20: #1 total tags in treatment: 3454961 INFO @ Fri, 15 Feb 2019 08:33:20: #1 user defined the maximum tags... INFO @ Fri, 15 Feb 2019 08:33:20: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 15 Feb 2019 08:33:20: #1 tags after filtering in treatment: 3113844 INFO @ Fri, 15 Feb 2019 08:33:20: #1 Redundant rate of treatment: 0.10 INFO @ Fri, 15 Feb 2019 08:33:20: #1 finished! INFO @ Fri, 15 Feb 2019 08:33:20: #2 Build Peak Model... INFO @ Fri, 15 Feb 2019 08:33:20: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 15 Feb 2019 08:33:20: #1 tags after filtering in treatment: 3113844 INFO @ Fri, 15 Feb 2019 08:33:20: #1 Redundant rate of treatment: 0.10 INFO @ Fri, 15 Feb 2019 08:33:20: #1 finished! INFO @ Fri, 15 Feb 2019 08:33:20: #2 Build Peak Model... INFO @ Fri, 15 Feb 2019 08:33:20: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 15 Feb 2019 08:33:20: #2 number of paired peaks: 4 WARNING @ Fri, 15 Feb 2019 08:33:20: Too few paired peaks (4) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 15 Feb 2019 08:33:20: Process for pairing-model is terminated! INFO @ Fri, 15 Feb 2019 08:33:20: #2 number of paired peaks: 4 WARNING @ Fri, 15 Feb 2019 08:33:20: Too few paired peaks (4) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 15 Feb 2019 08:33:20: Process for pairing-model is terminated! cat: ERX1174125.05_peaks.narrowPeak: そのようなファイルやディレクトリはありません cat: ERX1174125.10_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 5 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `ERX1174125.05_model.r': そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 2 millis rm: cannot remove `ERX1174125.05_*.xls': そのようなファイルやディレクトリはありません needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `ERX1174125.05_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling rm: cannot remove `ERX1174125.10_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `ERX1174125.10_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `ERX1174125.10_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。