Job ID = 11632905 sra ファイルのダウンロード中... Completed: 259894K bytes transferred in 6 seconds (324245K bits/sec), in 1 file. sra ファイルのダウンロードが完了しました。 Read layout: PAIRED fastq に変換中... Read 4000000 spots for /home/okishinya/chipatlas/results/sacCer3/ERX1173846/ERR1094360.sra Written 4000000 spots for /home/okishinya/chipatlas/results/sacCer3/ERX1173846/ERR1094360.sra rm: cannot remove `[DSE]RX*': そのようなファイルやディレクトリはありません rm: cannot remove `[DSE]RR*.fastq': そのようなファイルやディレクトリはありません fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:03:24 4000000 reads; of these: 4000000 (100.00%) were paired; of these: 156123 (3.90%) aligned concordantly 0 times 3600975 (90.02%) aligned concordantly exactly 1 time 242902 (6.07%) aligned concordantly >1 times ---- 156123 pairs aligned concordantly 0 times; of these: 104459 (66.91%) aligned discordantly 1 time ---- 51664 pairs aligned 0 times concordantly or discordantly; of these: 103328 mates make up the pairs; of these: 70727 (68.45%) aligned 0 times 16400 (15.87%) aligned exactly 1 time 16201 (15.68%) aligned >1 times 99.12% overall alignment rate Time searching: 00:03:24 Overall time: 00:03:24 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrIX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrVI... [bam_rmdup_core] processing reference chrVII... [bam_rmdup_core] processing reference chrVIII... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXI... [bam_rmdup_core] processing reference chrXII... [bam_rmdup_core] processing reference chrXIII... [bam_rmdup_core] processing reference chrXIV... [bam_rmdup_core] processing reference chrXV... [bam_rmdup_core] processing reference chrXVI... [bam_rmdup_core] 24495 / 3916013 = 0.0063 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Fri, 15 Feb 2019 08:18:30: # Command line: callpeak -t ERX1173846.bam -f BAM -g 12100000 -n ERX1173846.10 -q 1e-10 # ARGUMENTS LIST: # name = ERX1173846.10 # format = BAM # ChIP-seq file = ['ERX1173846.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 15 Feb 2019 08:18:30: #1 read tag files... INFO @ Fri, 15 Feb 2019 08:18:30: #1 read treatment tags... INFO @ Fri, 15 Feb 2019 08:18:30: # Command line: callpeak -t ERX1173846.bam -f BAM -g 12100000 -n ERX1173846.20 -q 1e-20 # ARGUMENTS LIST: # name = ERX1173846.20 # format = BAM # ChIP-seq file = ['ERX1173846.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 15 Feb 2019 08:18:30: #1 read tag files... INFO @ Fri, 15 Feb 2019 08:18:30: #1 read treatment tags... INFO @ Fri, 15 Feb 2019 08:18:30: # Command line: callpeak -t ERX1173846.bam -f BAM -g 12100000 -n ERX1173846.05 -q 1e-05 # ARGUMENTS LIST: # name = ERX1173846.05 # format = BAM # ChIP-seq file = ['ERX1173846.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Fri, 15 Feb 2019 08:18:30: #1 read tag files... INFO @ Fri, 15 Feb 2019 08:18:30: #1 read treatment tags... INFO @ Fri, 15 Feb 2019 08:18:37: 1000000 INFO @ Fri, 15 Feb 2019 08:18:38: 1000000 INFO @ Fri, 15 Feb 2019 08:18:38: 1000000 INFO @ Fri, 15 Feb 2019 08:18:45: 2000000 INFO @ Fri, 15 Feb 2019 08:18:46: 2000000 INFO @ Fri, 15 Feb 2019 08:18:46: 2000000 INFO @ Fri, 15 Feb 2019 08:18:53: 3000000 INFO @ Fri, 15 Feb 2019 08:18:54: 3000000 INFO @ Fri, 15 Feb 2019 08:18:54: 3000000 INFO @ Fri, 15 Feb 2019 08:19:00: 4000000 INFO @ Fri, 15 Feb 2019 08:19:02: 4000000 INFO @ Fri, 15 Feb 2019 08:19:02: 4000000 INFO @ Fri, 15 Feb 2019 08:19:08: 5000000 INFO @ Fri, 15 Feb 2019 08:19:10: 5000000 INFO @ Fri, 15 Feb 2019 08:19:10: 5000000 INFO @ Fri, 15 Feb 2019 08:19:16: 6000000 INFO @ Fri, 15 Feb 2019 08:19:18: 6000000 INFO @ Fri, 15 Feb 2019 08:19:19: 6000000 INFO @ Fri, 15 Feb 2019 08:19:25: 7000000 INFO @ Fri, 15 Feb 2019 08:19:27: 7000000 INFO @ Fri, 15 Feb 2019 08:19:27: 7000000 INFO @ Fri, 15 Feb 2019 08:19:32: #1 tag size is determined as 51 bps INFO @ Fri, 15 Feb 2019 08:19:32: #1 tag size = 51 INFO @ Fri, 15 Feb 2019 08:19:32: #1 total tags in treatment: 3819653 INFO @ Fri, 15 Feb 2019 08:19:32: #1 user defined the maximum tags... INFO @ Fri, 15 Feb 2019 08:19:32: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 15 Feb 2019 08:19:32: #1 tags after filtering in treatment: 3443813 INFO @ Fri, 15 Feb 2019 08:19:32: #1 Redundant rate of treatment: 0.10 INFO @ Fri, 15 Feb 2019 08:19:32: #1 finished! INFO @ Fri, 15 Feb 2019 08:19:32: #2 Build Peak Model... INFO @ Fri, 15 Feb 2019 08:19:32: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 15 Feb 2019 08:19:32: #2 number of paired peaks: 0 WARNING @ Fri, 15 Feb 2019 08:19:32: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 15 Feb 2019 08:19:32: Process for pairing-model is terminated! cat: ERX1173846.10_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 5 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `ERX1173846.10_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `ERX1173846.10_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `ERX1173846.10_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Fri, 15 Feb 2019 08:19:35: #1 tag size is determined as 51 bps INFO @ Fri, 15 Feb 2019 08:19:35: #1 tag size = 51 INFO @ Fri, 15 Feb 2019 08:19:35: #1 total tags in treatment: 3819653 INFO @ Fri, 15 Feb 2019 08:19:35: #1 user defined the maximum tags... INFO @ Fri, 15 Feb 2019 08:19:35: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 15 Feb 2019 08:19:35: #1 tags after filtering in treatment: 3443813 INFO @ Fri, 15 Feb 2019 08:19:35: #1 Redundant rate of treatment: 0.10 INFO @ Fri, 15 Feb 2019 08:19:35: #1 finished! INFO @ Fri, 15 Feb 2019 08:19:35: #2 Build Peak Model... INFO @ Fri, 15 Feb 2019 08:19:35: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 15 Feb 2019 08:19:35: #1 tag size is determined as 51 bps INFO @ Fri, 15 Feb 2019 08:19:35: #1 tag size = 51 INFO @ Fri, 15 Feb 2019 08:19:35: #1 total tags in treatment: 3819653 INFO @ Fri, 15 Feb 2019 08:19:35: #1 user defined the maximum tags... INFO @ Fri, 15 Feb 2019 08:19:35: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Fri, 15 Feb 2019 08:19:35: #2 number of paired peaks: 0 WARNING @ Fri, 15 Feb 2019 08:19:35: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 15 Feb 2019 08:19:35: Process for pairing-model is terminated! cat: ERX1173846.20_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 4 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `ERX1173846.20_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `ERX1173846.20_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `ERX1173846.20_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling INFO @ Fri, 15 Feb 2019 08:19:35: #1 tags after filtering in treatment: 3443813 INFO @ Fri, 15 Feb 2019 08:19:35: #1 Redundant rate of treatment: 0.10 INFO @ Fri, 15 Feb 2019 08:19:35: #1 finished! INFO @ Fri, 15 Feb 2019 08:19:35: #2 Build Peak Model... INFO @ Fri, 15 Feb 2019 08:19:35: #2 looking for paired plus/minus strand peaks... INFO @ Fri, 15 Feb 2019 08:19:35: #2 number of paired peaks: 0 WARNING @ Fri, 15 Feb 2019 08:19:35: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Fri, 15 Feb 2019 08:19:35: Process for pairing-model is terminated! cat: ERX1173846.05_peaks.narrowPeak: そのようなファイルやディレクトリはありません pass1 - making usageList (0 chroms): 5 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove `ERX1173846.05_model.r': そのようなファイルやディレクトリはありません rm: cannot remove `ERX1173846.05_*.xls': そのようなファイルやディレクトリはありません rm: cannot remove `ERX1173846.05_peaks.narrowPeak': そのようなファイルやディレクトリはありません CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。