Job ID = 5720179 sra ファイルのダウンロード中... Read layout: PAIRED fastq に変換中... 2020-04-15T12:26:24 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) 2020-04-15T12:56:28 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) spots read : 28,793,155 reads read : 57,586,310 reads written : 57,586,310 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 01:38:19 28793155 reads; of these: 28793155 (100.00%) were paired; of these: 10876596 (37.77%) aligned concordantly 0 times 13037508 (45.28%) aligned concordantly exactly 1 time 4879051 (16.95%) aligned concordantly >1 times ---- 10876596 pairs aligned concordantly 0 times; of these: 4917807 (45.21%) aligned discordantly 1 time ---- 5958789 pairs aligned 0 times concordantly or discordantly; of these: 11917578 mates make up the pairs; of these: 9347831 (78.44%) aligned 0 times 749966 (6.29%) aligned exactly 1 time 1819781 (15.27%) aligned >1 times 83.77% overall alignment rate Time searching: 01:38:19 Overall time: 01:38:19 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 7 sequences. [bam_sort_core] merging from 36 files... [bam_rmdup_core] processing reference chrI... [bam_rmdup_core] processing reference chrII... [bam_rmdup_core] processing reference chrIII... [bam_rmdup_core] processing reference chrIV... [bam_rmdup_core] processing reference chrV... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] 3380049 / 22513973 = 0.1501 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Thu, 16 Apr 2020 00:19:38: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Thu, 16 Apr 2020 00:19:38: #1 read tag files... INFO @ Thu, 16 Apr 2020 00:19:38: #1 read treatment tags... INFO @ Thu, 16 Apr 2020 00:19:46: 1000000 INFO @ Thu, 16 Apr 2020 00:19:53: 2000000 INFO @ Thu, 16 Apr 2020 00:20:00: 3000000 WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Thu, 16 Apr 2020 00:20:07: 4000000 INFO @ Thu, 16 Apr 2020 00:20:08: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Thu, 16 Apr 2020 00:20:08: #1 read tag files... INFO @ Thu, 16 Apr 2020 00:20:08: #1 read treatment tags... INFO @ Thu, 16 Apr 2020 00:20:15: 5000000 INFO @ Thu, 16 Apr 2020 00:20:15: 1000000 INFO @ Thu, 16 Apr 2020 00:20:22: 6000000 INFO @ Thu, 16 Apr 2020 00:20:22: 2000000 INFO @ Thu, 16 Apr 2020 00:20:29: 3000000 INFO @ Thu, 16 Apr 2020 00:20:30: 7000000 BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Thu, 16 Apr 2020 00:20:37: 4000000 INFO @ Thu, 16 Apr 2020 00:20:37: 8000000 INFO @ Thu, 16 Apr 2020 00:20:38: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Thu, 16 Apr 2020 00:20:38: #1 read tag files... INFO @ Thu, 16 Apr 2020 00:20:38: #1 read treatment tags... INFO @ Thu, 16 Apr 2020 00:20:44: 9000000 INFO @ Thu, 16 Apr 2020 00:20:45: 5000000 INFO @ Thu, 16 Apr 2020 00:20:46: 1000000 INFO @ Thu, 16 Apr 2020 00:20:52: 10000000 INFO @ Thu, 16 Apr 2020 00:20:53: 6000000 INFO @ Thu, 16 Apr 2020 00:20:54: 2000000 INFO @ Thu, 16 Apr 2020 00:21:00: 11000000 INFO @ Thu, 16 Apr 2020 00:21:01: 7000000 INFO @ Thu, 16 Apr 2020 00:21:02: 3000000 INFO @ Thu, 16 Apr 2020 00:21:07: 12000000 INFO @ Thu, 16 Apr 2020 00:21:09: 8000000 INFO @ Thu, 16 Apr 2020 00:21:11: 4000000 INFO @ Thu, 16 Apr 2020 00:21:14: 13000000 INFO @ Thu, 16 Apr 2020 00:21:17: 9000000 INFO @ Thu, 16 Apr 2020 00:21:19: 5000000 INFO @ Thu, 16 Apr 2020 00:21:22: 14000000 INFO @ Thu, 16 Apr 2020 00:21:26: 10000000 INFO @ Thu, 16 Apr 2020 00:21:27: 6000000 INFO @ Thu, 16 Apr 2020 00:21:29: 15000000 INFO @ Thu, 16 Apr 2020 00:21:35: 11000000 INFO @ Thu, 16 Apr 2020 00:21:36: 7000000 INFO @ Thu, 16 Apr 2020 00:21:37: 16000000 INFO @ Thu, 16 Apr 2020 00:21:43: 12000000 INFO @ Thu, 16 Apr 2020 00:21:43: 8000000 INFO @ Thu, 16 Apr 2020 00:21:44: 17000000 INFO @ Thu, 16 Apr 2020 00:21:51: 13000000 INFO @ Thu, 16 Apr 2020 00:21:51: 9000000 INFO @ Thu, 16 Apr 2020 00:21:52: 18000000 INFO @ Thu, 16 Apr 2020 00:21:59: 14000000 INFO @ Thu, 16 Apr 2020 00:22:00: 10000000 INFO @ Thu, 16 Apr 2020 00:22:00: 19000000 INFO @ Thu, 16 Apr 2020 00:22:07: 20000000 INFO @ Thu, 16 Apr 2020 00:22:08: 15000000 INFO @ Thu, 16 Apr 2020 00:22:08: 11000000 INFO @ Thu, 16 Apr 2020 00:22:14: 21000000 INFO @ Thu, 16 Apr 2020 00:22:16: 16000000 INFO @ Thu, 16 Apr 2020 00:22:16: 12000000 INFO @ Thu, 16 Apr 2020 00:22:22: 22000000 INFO @ Thu, 16 Apr 2020 00:22:24: 13000000 INFO @ Thu, 16 Apr 2020 00:22:24: 17000000 INFO @ Thu, 16 Apr 2020 00:22:30: 23000000 INFO @ Thu, 16 Apr 2020 00:22:32: 18000000 INFO @ Thu, 16 Apr 2020 00:22:33: 14000000 INFO @ Thu, 16 Apr 2020 00:22:38: 24000000 INFO @ Thu, 16 Apr 2020 00:22:40: 19000000 INFO @ Thu, 16 Apr 2020 00:22:41: 15000000 INFO @ Thu, 16 Apr 2020 00:22:46: 25000000 INFO @ Thu, 16 Apr 2020 00:22:49: 16000000 INFO @ Thu, 16 Apr 2020 00:22:49: 20000000 INFO @ Thu, 16 Apr 2020 00:22:54: 26000000 INFO @ Thu, 16 Apr 2020 00:22:57: 17000000 INFO @ Thu, 16 Apr 2020 00:22:57: 21000000 INFO @ Thu, 16 Apr 2020 00:23:01: 27000000 INFO @ Thu, 16 Apr 2020 00:23:05: 18000000 INFO @ Thu, 16 Apr 2020 00:23:05: 22000000 INFO @ Thu, 16 Apr 2020 00:23:09: 28000000 INFO @ Thu, 16 Apr 2020 00:23:13: 19000000 INFO @ Thu, 16 Apr 2020 00:23:13: 23000000 INFO @ Thu, 16 Apr 2020 00:23:16: 29000000 INFO @ Thu, 16 Apr 2020 00:23:22: 24000000 INFO @ Thu, 16 Apr 2020 00:23:22: 20000000 INFO @ Thu, 16 Apr 2020 00:23:25: 30000000 INFO @ Thu, 16 Apr 2020 00:23:30: 21000000 INFO @ Thu, 16 Apr 2020 00:23:30: 25000000 INFO @ Thu, 16 Apr 2020 00:23:33: 31000000 INFO @ Thu, 16 Apr 2020 00:23:38: 22000000 INFO @ Thu, 16 Apr 2020 00:23:38: 26000000 INFO @ Thu, 16 Apr 2020 00:23:41: 32000000 INFO @ Thu, 16 Apr 2020 00:23:46: 23000000 INFO @ Thu, 16 Apr 2020 00:23:46: 27000000 INFO @ Thu, 16 Apr 2020 00:23:48: 33000000 INFO @ Thu, 16 Apr 2020 00:23:55: 24000000 INFO @ Thu, 16 Apr 2020 00:23:55: 28000000 INFO @ Thu, 16 Apr 2020 00:23:56: 34000000 INFO @ Thu, 16 Apr 2020 00:24:03: 25000000 INFO @ Thu, 16 Apr 2020 00:24:03: 29000000 INFO @ Thu, 16 Apr 2020 00:24:03: 35000000 INFO @ Thu, 16 Apr 2020 00:24:10: 36000000 INFO @ Thu, 16 Apr 2020 00:24:11: 26000000 INFO @ Thu, 16 Apr 2020 00:24:11: 30000000 INFO @ Thu, 16 Apr 2020 00:24:17: 37000000 INFO @ Thu, 16 Apr 2020 00:24:19: 27000000 INFO @ Thu, 16 Apr 2020 00:24:19: 31000000 INFO @ Thu, 16 Apr 2020 00:24:24: 38000000 INFO @ Thu, 16 Apr 2020 00:24:27: 28000000 INFO @ Thu, 16 Apr 2020 00:24:28: 32000000 INFO @ Thu, 16 Apr 2020 00:24:33: 39000000 INFO @ Thu, 16 Apr 2020 00:24:35: 29000000 INFO @ Thu, 16 Apr 2020 00:24:36: 33000000 INFO @ Thu, 16 Apr 2020 00:24:41: 40000000 INFO @ Thu, 16 Apr 2020 00:24:44: 30000000 INFO @ Thu, 16 Apr 2020 00:24:45: 34000000 INFO @ Thu, 16 Apr 2020 00:24:49: 41000000 INFO @ Thu, 16 Apr 2020 00:24:52: 31000000 INFO @ Thu, 16 Apr 2020 00:24:53: 35000000 INFO @ Thu, 16 Apr 2020 00:24:53: #1 tag size is determined as 150 bps INFO @ Thu, 16 Apr 2020 00:24:53: #1 tag size = 150 INFO @ Thu, 16 Apr 2020 00:24:53: #1 total tags in treatment: 15045307 INFO @ Thu, 16 Apr 2020 00:24:53: #1 user defined the maximum tags... INFO @ Thu, 16 Apr 2020 00:24:53: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Thu, 16 Apr 2020 00:24:53: #1 tags after filtering in treatment: 11759563 INFO @ Thu, 16 Apr 2020 00:24:53: #1 Redundant rate of treatment: 0.22 INFO @ Thu, 16 Apr 2020 00:24:53: #1 finished! INFO @ Thu, 16 Apr 2020 00:24:53: #2 Build Peak Model... INFO @ Thu, 16 Apr 2020 00:24:53: #2 looking for paired plus/minus strand peaks... INFO @ Thu, 16 Apr 2020 00:24:54: #2 number of paired peaks: 539 WARNING @ Thu, 16 Apr 2020 00:24:54: Fewer paired peaks (539) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 539 pairs to build model! INFO @ Thu, 16 Apr 2020 00:24:54: start model_add_line... INFO @ Thu, 16 Apr 2020 00:24:54: start X-correlation... INFO @ Thu, 16 Apr 2020 00:24:54: end of X-cor INFO @ Thu, 16 Apr 2020 00:24:54: #2 finished! INFO @ Thu, 16 Apr 2020 00:24:54: #2 predicted fragment length is 220 bps INFO @ Thu, 16 Apr 2020 00:24:54: #2 alternative fragment length(s) may be 220 bps INFO @ Thu, 16 Apr 2020 00:24:54: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.05_model.r WARNING @ Thu, 16 Apr 2020 00:24:54: #2 Since the d (220) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Thu, 16 Apr 2020 00:24:54: #2 You may need to consider one of the other alternative d(s): 220 WARNING @ Thu, 16 Apr 2020 00:24:54: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Thu, 16 Apr 2020 00:24:54: #3 Call peaks... INFO @ Thu, 16 Apr 2020 00:24:54: #3 Pre-compute pvalue-qvalue table... INFO @ Thu, 16 Apr 2020 00:24:59: 32000000 INFO @ Thu, 16 Apr 2020 00:25:00: 36000000 INFO @ Thu, 16 Apr 2020 00:25:07: 33000000 INFO @ Thu, 16 Apr 2020 00:25:09: 37000000 INFO @ Thu, 16 Apr 2020 00:25:15: 34000000 INFO @ Thu, 16 Apr 2020 00:25:17: 38000000 INFO @ Thu, 16 Apr 2020 00:25:21: #3 Call peaks for each chromosome... INFO @ Thu, 16 Apr 2020 00:25:23: 35000000 INFO @ Thu, 16 Apr 2020 00:25:25: 39000000 INFO @ Thu, 16 Apr 2020 00:25:31: 36000000 INFO @ Thu, 16 Apr 2020 00:25:33: 40000000 INFO @ Thu, 16 Apr 2020 00:25:34: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.05_peaks.xls INFO @ Thu, 16 Apr 2020 00:25:34: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.05_peaks.narrowPeak INFO @ Thu, 16 Apr 2020 00:25:34: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.05_summits.bed INFO @ Thu, 16 Apr 2020 00:25:34: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (798 records, 4 fields): 2 millis CompletedMACS2peakCalling INFO @ Thu, 16 Apr 2020 00:25:39: 37000000 INFO @ Thu, 16 Apr 2020 00:25:41: 41000000 INFO @ Thu, 16 Apr 2020 00:25:45: #1 tag size is determined as 150 bps INFO @ Thu, 16 Apr 2020 00:25:45: #1 tag size = 150 INFO @ Thu, 16 Apr 2020 00:25:45: #1 total tags in treatment: 15045307 INFO @ Thu, 16 Apr 2020 00:25:45: #1 user defined the maximum tags... INFO @ Thu, 16 Apr 2020 00:25:45: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Thu, 16 Apr 2020 00:25:46: #1 tags after filtering in treatment: 11759563 INFO @ Thu, 16 Apr 2020 00:25:46: #1 Redundant rate of treatment: 0.22 INFO @ Thu, 16 Apr 2020 00:25:46: #1 finished! INFO @ Thu, 16 Apr 2020 00:25:46: #2 Build Peak Model... INFO @ Thu, 16 Apr 2020 00:25:46: #2 looking for paired plus/minus strand peaks... INFO @ Thu, 16 Apr 2020 00:25:47: #2 number of paired peaks: 539 WARNING @ Thu, 16 Apr 2020 00:25:47: Fewer paired peaks (539) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 539 pairs to build model! INFO @ Thu, 16 Apr 2020 00:25:47: start model_add_line... INFO @ Thu, 16 Apr 2020 00:25:47: start X-correlation... INFO @ Thu, 16 Apr 2020 00:25:47: end of X-cor INFO @ Thu, 16 Apr 2020 00:25:47: #2 finished! INFO @ Thu, 16 Apr 2020 00:25:47: #2 predicted fragment length is 220 bps INFO @ Thu, 16 Apr 2020 00:25:47: #2 alternative fragment length(s) may be 220 bps INFO @ Thu, 16 Apr 2020 00:25:47: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.10_model.r WARNING @ Thu, 16 Apr 2020 00:25:47: #2 Since the d (220) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Thu, 16 Apr 2020 00:25:47: #2 You may need to consider one of the other alternative d(s): 220 WARNING @ Thu, 16 Apr 2020 00:25:47: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Thu, 16 Apr 2020 00:25:47: #3 Call peaks... INFO @ Thu, 16 Apr 2020 00:25:47: #3 Pre-compute pvalue-qvalue table... INFO @ Thu, 16 Apr 2020 00:25:47: 38000000 INFO @ Thu, 16 Apr 2020 00:25:55: 39000000 INFO @ Thu, 16 Apr 2020 00:26:02: 40000000 INFO @ Thu, 16 Apr 2020 00:26:10: 41000000 INFO @ Thu, 16 Apr 2020 00:26:13: #1 tag size is determined as 150 bps INFO @ Thu, 16 Apr 2020 00:26:13: #1 tag size = 150 INFO @ Thu, 16 Apr 2020 00:26:13: #1 total tags in treatment: 15045307 INFO @ Thu, 16 Apr 2020 00:26:13: #1 user defined the maximum tags... INFO @ Thu, 16 Apr 2020 00:26:13: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Thu, 16 Apr 2020 00:26:13: #1 tags after filtering in treatment: 11759563 INFO @ Thu, 16 Apr 2020 00:26:13: #1 Redundant rate of treatment: 0.22 INFO @ Thu, 16 Apr 2020 00:26:13: #1 finished! INFO @ Thu, 16 Apr 2020 00:26:13: #2 Build Peak Model... INFO @ Thu, 16 Apr 2020 00:26:13: #2 looking for paired plus/minus strand peaks... INFO @ Thu, 16 Apr 2020 00:26:14: #2 number of paired peaks: 539 WARNING @ Thu, 16 Apr 2020 00:26:14: Fewer paired peaks (539) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 539 pairs to build model! INFO @ Thu, 16 Apr 2020 00:26:14: start model_add_line... INFO @ Thu, 16 Apr 2020 00:26:14: start X-correlation... INFO @ Thu, 16 Apr 2020 00:26:14: end of X-cor INFO @ Thu, 16 Apr 2020 00:26:14: #2 finished! INFO @ Thu, 16 Apr 2020 00:26:14: #2 predicted fragment length is 220 bps INFO @ Thu, 16 Apr 2020 00:26:14: #2 alternative fragment length(s) may be 220 bps INFO @ Thu, 16 Apr 2020 00:26:14: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.20_model.r WARNING @ Thu, 16 Apr 2020 00:26:14: #2 Since the d (220) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Thu, 16 Apr 2020 00:26:14: #2 You may need to consider one of the other alternative d(s): 220 WARNING @ Thu, 16 Apr 2020 00:26:14: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Thu, 16 Apr 2020 00:26:14: #3 Call peaks... INFO @ Thu, 16 Apr 2020 00:26:14: #3 Pre-compute pvalue-qvalue table... INFO @ Thu, 16 Apr 2020 00:26:15: #3 Call peaks for each chromosome... INFO @ Thu, 16 Apr 2020 00:26:27: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.10_peaks.xls INFO @ Thu, 16 Apr 2020 00:26:27: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.10_peaks.narrowPeak INFO @ Thu, 16 Apr 2020 00:26:27: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.10_summits.bed INFO @ Thu, 16 Apr 2020 00:26:27: Done! pass1 - making usageList (6 chroms): 0 millis pass2 - checking and writing primary data (474 records, 4 fields): 2 millis CompletedMACS2peakCalling INFO @ Thu, 16 Apr 2020 00:26:42: #3 Call peaks for each chromosome... INFO @ Thu, 16 Apr 2020 00:26:55: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.20_peaks.xls INFO @ Thu, 16 Apr 2020 00:26:55: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.20_peaks.narrowPeak INFO @ Thu, 16 Apr 2020 00:26:55: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX6619550/SRX6619550.20_summits.bed INFO @ Thu, 16 Apr 2020 00:26:55: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (303 records, 4 fields): 1 millis CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。