Job ID = 2589820 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... spots read : 7,546,709 reads read : 7,546,709 reads written : 7,546,709 rm: cannot remove ‘[DSE]RR*’: No such file or directory rm: cannot remove ‘/home/okishinya/ncbi/public/sra/SRR947450.sra.cache’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:01 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:00:47 7546709 reads; of these: 7546709 (100.00%) were unpaired; of these: 5246235 (69.52%) aligned 0 times 1890234 (25.05%) aligned exactly 1 time 410240 (5.44%) aligned >1 times 30.48% overall alignment rate Time searching: 00:00:48 Overall time: 00:00:48 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 7 sequences. [bam_rmdupse_core] 125786 / 2300474 = 0.0547 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Mon, 12 Aug 2019 18:33:14: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Mon, 12 Aug 2019 18:33:14: #1 read tag files... INFO @ Mon, 12 Aug 2019 18:33:14: #1 read treatment tags... INFO @ Mon, 12 Aug 2019 18:33:15: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Mon, 12 Aug 2019 18:33:15: #1 read tag files... INFO @ Mon, 12 Aug 2019 18:33:15: #1 read treatment tags... INFO @ Mon, 12 Aug 2019 18:33:16: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Mon, 12 Aug 2019 18:33:16: #1 read tag files... INFO @ Mon, 12 Aug 2019 18:33:16: #1 read treatment tags... INFO @ Mon, 12 Aug 2019 18:33:21: 1000000 INFO @ Mon, 12 Aug 2019 18:33:23: 1000000 INFO @ Mon, 12 Aug 2019 18:33:24: 1000000 INFO @ Mon, 12 Aug 2019 18:33:28: 2000000 INFO @ Mon, 12 Aug 2019 18:33:29: #1 tag size is determined as 32 bps INFO @ Mon, 12 Aug 2019 18:33:29: #1 tag size = 32 INFO @ Mon, 12 Aug 2019 18:33:29: #1 total tags in treatment: 2174688 INFO @ Mon, 12 Aug 2019 18:33:29: #1 user defined the maximum tags... INFO @ Mon, 12 Aug 2019 18:33:29: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Mon, 12 Aug 2019 18:33:29: #1 tags after filtering in treatment: 2174688 INFO @ Mon, 12 Aug 2019 18:33:29: #1 Redundant rate of treatment: 0.00 INFO @ Mon, 12 Aug 2019 18:33:29: #1 finished! INFO @ Mon, 12 Aug 2019 18:33:29: #2 Build Peak Model... INFO @ Mon, 12 Aug 2019 18:33:29: #2 looking for paired plus/minus strand peaks... INFO @ Mon, 12 Aug 2019 18:33:30: #2 number of paired peaks: 441 WARNING @ Mon, 12 Aug 2019 18:33:30: Fewer paired peaks (441) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 441 pairs to build model! INFO @ Mon, 12 Aug 2019 18:33:30: start model_add_line... INFO @ Mon, 12 Aug 2019 18:33:30: start X-correlation... INFO @ Mon, 12 Aug 2019 18:33:30: end of X-cor INFO @ Mon, 12 Aug 2019 18:33:30: #2 finished! INFO @ Mon, 12 Aug 2019 18:33:30: #2 predicted fragment length is 35 bps INFO @ Mon, 12 Aug 2019 18:33:30: #2 alternative fragment length(s) may be 35,424 bps INFO @ Mon, 12 Aug 2019 18:33:30: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.05_model.r WARNING @ Mon, 12 Aug 2019 18:33:30: #2 Since the d (35) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Mon, 12 Aug 2019 18:33:30: #2 You may need to consider one of the other alternative d(s): 35,424 WARNING @ Mon, 12 Aug 2019 18:33:30: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Mon, 12 Aug 2019 18:33:30: #3 Call peaks... INFO @ Mon, 12 Aug 2019 18:33:30: #3 Pre-compute pvalue-qvalue table... INFO @ Mon, 12 Aug 2019 18:33:30: 2000000 INFO @ Mon, 12 Aug 2019 18:33:30: 2000000 INFO @ Mon, 12 Aug 2019 18:33:31: #1 tag size is determined as 32 bps INFO @ Mon, 12 Aug 2019 18:33:31: #1 tag size = 32 INFO @ Mon, 12 Aug 2019 18:33:31: #1 total tags in treatment: 2174688 INFO @ Mon, 12 Aug 2019 18:33:31: #1 user defined the maximum tags... INFO @ Mon, 12 Aug 2019 18:33:31: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Mon, 12 Aug 2019 18:33:32: #1 tags after filtering in treatment: 2174688 INFO @ Mon, 12 Aug 2019 18:33:32: #1 Redundant rate of treatment: 0.00 INFO @ Mon, 12 Aug 2019 18:33:32: #1 finished! INFO @ Mon, 12 Aug 2019 18:33:32: #2 Build Peak Model... INFO @ Mon, 12 Aug 2019 18:33:32: #2 looking for paired plus/minus strand peaks... INFO @ Mon, 12 Aug 2019 18:33:32: #1 tag size is determined as 32 bps INFO @ Mon, 12 Aug 2019 18:33:32: #1 tag size = 32 INFO @ Mon, 12 Aug 2019 18:33:32: #1 total tags in treatment: 2174688 INFO @ Mon, 12 Aug 2019 18:33:32: #1 user defined the maximum tags... INFO @ Mon, 12 Aug 2019 18:33:32: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Mon, 12 Aug 2019 18:33:32: #1 tags after filtering in treatment: 2174688 INFO @ Mon, 12 Aug 2019 18:33:32: #1 Redundant rate of treatment: 0.00 INFO @ Mon, 12 Aug 2019 18:33:32: #1 finished! INFO @ Mon, 12 Aug 2019 18:33:32: #2 Build Peak Model... INFO @ Mon, 12 Aug 2019 18:33:32: #2 looking for paired plus/minus strand peaks... INFO @ Mon, 12 Aug 2019 18:33:32: #2 number of paired peaks: 441 WARNING @ Mon, 12 Aug 2019 18:33:32: Fewer paired peaks (441) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 441 pairs to build model! INFO @ Mon, 12 Aug 2019 18:33:32: start model_add_line... INFO @ Mon, 12 Aug 2019 18:33:32: start X-correlation... INFO @ Mon, 12 Aug 2019 18:33:32: end of X-cor INFO @ Mon, 12 Aug 2019 18:33:32: #2 finished! INFO @ Mon, 12 Aug 2019 18:33:32: #2 predicted fragment length is 35 bps INFO @ Mon, 12 Aug 2019 18:33:32: #2 alternative fragment length(s) may be 35,424 bps INFO @ Mon, 12 Aug 2019 18:33:32: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.10_model.r WARNING @ Mon, 12 Aug 2019 18:33:32: #2 Since the d (35) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Mon, 12 Aug 2019 18:33:32: #2 You may need to consider one of the other alternative d(s): 35,424 WARNING @ Mon, 12 Aug 2019 18:33:32: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Mon, 12 Aug 2019 18:33:32: #3 Call peaks... INFO @ Mon, 12 Aug 2019 18:33:32: #3 Pre-compute pvalue-qvalue table... INFO @ Mon, 12 Aug 2019 18:33:32: #2 number of paired peaks: 441 WARNING @ Mon, 12 Aug 2019 18:33:32: Fewer paired peaks (441) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 441 pairs to build model! INFO @ Mon, 12 Aug 2019 18:33:32: start model_add_line... INFO @ Mon, 12 Aug 2019 18:33:32: start X-correlation... INFO @ Mon, 12 Aug 2019 18:33:32: end of X-cor INFO @ Mon, 12 Aug 2019 18:33:32: #2 finished! INFO @ Mon, 12 Aug 2019 18:33:32: #2 predicted fragment length is 35 bps INFO @ Mon, 12 Aug 2019 18:33:32: #2 alternative fragment length(s) may be 35,424 bps INFO @ Mon, 12 Aug 2019 18:33:32: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.20_model.r WARNING @ Mon, 12 Aug 2019 18:33:32: #2 Since the d (35) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Mon, 12 Aug 2019 18:33:32: #2 You may need to consider one of the other alternative d(s): 35,424 WARNING @ Mon, 12 Aug 2019 18:33:32: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Mon, 12 Aug 2019 18:33:32: #3 Call peaks... INFO @ Mon, 12 Aug 2019 18:33:32: #3 Pre-compute pvalue-qvalue table... INFO @ Mon, 12 Aug 2019 18:33:36: #3 Call peaks for each chromosome... INFO @ Mon, 12 Aug 2019 18:33:39: #3 Call peaks for each chromosome... INFO @ Mon, 12 Aug 2019 18:33:39: #3 Call peaks for each chromosome... INFO @ Mon, 12 Aug 2019 18:33:40: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.05_peaks.xls INFO @ Mon, 12 Aug 2019 18:33:40: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.05_peaks.narrowPeak INFO @ Mon, 12 Aug 2019 18:33:40: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.05_summits.bed INFO @ Mon, 12 Aug 2019 18:33:40: Done! pass1 - making usageList (7 chroms): 1 millis pass2 - checking and writing primary data (360 records, 4 fields): 3 millis CompletedMACS2peakCalling INFO @ Mon, 12 Aug 2019 18:33:42: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.10_peaks.xls INFO @ Mon, 12 Aug 2019 18:33:42: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.10_peaks.narrowPeak INFO @ Mon, 12 Aug 2019 18:33:42: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.10_summits.bed INFO @ Mon, 12 Aug 2019 18:33:42: Done! INFO @ Mon, 12 Aug 2019 18:33:42: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.20_peaks.xls INFO @ Mon, 12 Aug 2019 18:33:42: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.20_peaks.narrowPeak INFO @ Mon, 12 Aug 2019 18:33:42: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX331218/SRX331218.20_summits.bed INFO @ Mon, 12 Aug 2019 18:33:42: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (135 records, 4 fields): 2 millis CompletedMACS2peakCalling pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (48 records, 4 fields): 2 millis CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。