Job ID = 14160580 SRX = SRX10399023 Genome = ce10 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... Read 30237542 spots for SRR14022411/SRR14022411.sra Written 30237542 spots for SRR14022411/SRR14022411.sra fastq に変換しました。 bowtie でマッピング中... Your job 14160777 ("srTce11") has been submitted Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:21:47 30237542 reads; of these: 30237542 (100.00%) were unpaired; of these: 30217486 (99.93%) aligned 0 times 13145 (0.04%) aligned exactly 1 time 6911 (0.02%) aligned >1 times 0.07% overall alignment rate Time searching: 00:21:47 Overall time: 00:21:47 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 7 sequences. [bam_rmdupse_core] 7159 / 20056 = 0.3570 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Thu, 09 Dec 2021 03:41:02: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Thu, 09 Dec 2021 03:41:02: #1 read tag files... INFO @ Thu, 09 Dec 2021 03:41:02: #1 read treatment tags... INFO @ Thu, 09 Dec 2021 03:41:02: #1 tag size is determined as 152 bps INFO @ Thu, 09 Dec 2021 03:41:02: #1 tag size = 152 INFO @ Thu, 09 Dec 2021 03:41:02: #1 total tags in treatment: 12897 INFO @ Thu, 09 Dec 2021 03:41:02: #1 user defined the maximum tags... INFO @ Thu, 09 Dec 2021 03:41:02: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Thu, 09 Dec 2021 03:41:02: #1 tags after filtering in treatment: 12897 INFO @ Thu, 09 Dec 2021 03:41:02: #1 Redundant rate of treatment: 0.00 INFO @ Thu, 09 Dec 2021 03:41:02: #1 finished! INFO @ Thu, 09 Dec 2021 03:41:02: #2 Build Peak Model... INFO @ Thu, 09 Dec 2021 03:41:02: #2 looking for paired plus/minus strand peaks... INFO @ Thu, 09 Dec 2021 03:41:02: #2 number of paired peaks: 535 WARNING @ Thu, 09 Dec 2021 03:41:02: Fewer paired peaks (535) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 535 pairs to build model! INFO @ Thu, 09 Dec 2021 03:41:02: start model_add_line... INFO @ Thu, 09 Dec 2021 03:41:02: start X-correlation... INFO @ Thu, 09 Dec 2021 03:41:02: end of X-cor INFO @ Thu, 09 Dec 2021 03:41:02: #2 finished! INFO @ Thu, 09 Dec 2021 03:41:02: #2 predicted fragment length is 265 bps INFO @ Thu, 09 Dec 2021 03:41:02: #2 alternative fragment length(s) may be 14,60,265,597 bps INFO @ Thu, 09 Dec 2021 03:41:02: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.05_model.r WARNING @ Thu, 09 Dec 2021 03:41:02: #2 Since the d (265) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Thu, 09 Dec 2021 03:41:02: #2 You may need to consider one of the other alternative d(s): 14,60,265,597 WARNING @ Thu, 09 Dec 2021 03:41:02: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Thu, 09 Dec 2021 03:41:02: #3 Call peaks... INFO @ Thu, 09 Dec 2021 03:41:02: #3 Pre-compute pvalue-qvalue table... INFO @ Thu, 09 Dec 2021 03:41:02: #3 Call peaks for each chromosome... INFO @ Thu, 09 Dec 2021 03:41:02: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.05_peaks.xls INFO @ Thu, 09 Dec 2021 03:41:02: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.05_peaks.narrowPeak INFO @ Thu, 09 Dec 2021 03:41:02: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.05_summits.bed INFO @ Thu, 09 Dec 2021 03:41:02: Done! pass1 - making usageList (7 chroms): 1 millis pass2 - checking and writing primary data (47 records, 4 fields): 1 millis CompletedMACS2peakCalling WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Thu, 09 Dec 2021 03:41:32: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Thu, 09 Dec 2021 03:41:32: #1 read tag files... INFO @ Thu, 09 Dec 2021 03:41:32: #1 read treatment tags... INFO @ Thu, 09 Dec 2021 03:41:32: #1 tag size is determined as 152 bps INFO @ Thu, 09 Dec 2021 03:41:32: #1 tag size = 152 INFO @ Thu, 09 Dec 2021 03:41:32: #1 total tags in treatment: 12897 INFO @ Thu, 09 Dec 2021 03:41:32: #1 user defined the maximum tags... INFO @ Thu, 09 Dec 2021 03:41:32: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Thu, 09 Dec 2021 03:41:32: #1 tags after filtering in treatment: 12897 INFO @ Thu, 09 Dec 2021 03:41:32: #1 Redundant rate of treatment: 0.00 INFO @ Thu, 09 Dec 2021 03:41:32: #1 finished! INFO @ Thu, 09 Dec 2021 03:41:32: #2 Build Peak Model... INFO @ Thu, 09 Dec 2021 03:41:32: #2 looking for paired plus/minus strand peaks... INFO @ Thu, 09 Dec 2021 03:41:32: #2 number of paired peaks: 535 WARNING @ Thu, 09 Dec 2021 03:41:32: Fewer paired peaks (535) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 535 pairs to build model! INFO @ Thu, 09 Dec 2021 03:41:32: start model_add_line... INFO @ Thu, 09 Dec 2021 03:41:32: start X-correlation... INFO @ Thu, 09 Dec 2021 03:41:32: end of X-cor INFO @ Thu, 09 Dec 2021 03:41:32: #2 finished! INFO @ Thu, 09 Dec 2021 03:41:32: #2 predicted fragment length is 265 bps INFO @ Thu, 09 Dec 2021 03:41:32: #2 alternative fragment length(s) may be 14,60,265,597 bps INFO @ Thu, 09 Dec 2021 03:41:32: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.10_model.r WARNING @ Thu, 09 Dec 2021 03:41:32: #2 Since the d (265) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Thu, 09 Dec 2021 03:41:32: #2 You may need to consider one of the other alternative d(s): 14,60,265,597 WARNING @ Thu, 09 Dec 2021 03:41:32: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Thu, 09 Dec 2021 03:41:32: #3 Call peaks... INFO @ Thu, 09 Dec 2021 03:41:32: #3 Pre-compute pvalue-qvalue table... INFO @ Thu, 09 Dec 2021 03:41:32: #3 Call peaks for each chromosome... INFO @ Thu, 09 Dec 2021 03:41:32: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.10_peaks.xls INFO @ Thu, 09 Dec 2021 03:41:32: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.10_peaks.narrowPeak INFO @ Thu, 09 Dec 2021 03:41:32: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.10_summits.bed INFO @ Thu, 09 Dec 2021 03:41:32: Done! pass1 - making usageList (6 chroms): 0 millis pass2 - checking and writing primary data (11 records, 4 fields): 3 millis CompletedMACS2peakCalling BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。 INFO @ Thu, 09 Dec 2021 03:42:02: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Thu, 09 Dec 2021 03:42:02: #1 read tag files... INFO @ Thu, 09 Dec 2021 03:42:02: #1 read treatment tags... INFO @ Thu, 09 Dec 2021 03:42:02: #1 tag size is determined as 152 bps INFO @ Thu, 09 Dec 2021 03:42:02: #1 tag size = 152 INFO @ Thu, 09 Dec 2021 03:42:02: #1 total tags in treatment: 12897 INFO @ Thu, 09 Dec 2021 03:42:02: #1 user defined the maximum tags... INFO @ Thu, 09 Dec 2021 03:42:02: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Thu, 09 Dec 2021 03:42:02: #1 tags after filtering in treatment: 12897 INFO @ Thu, 09 Dec 2021 03:42:02: #1 Redundant rate of treatment: 0.00 INFO @ Thu, 09 Dec 2021 03:42:02: #1 finished! INFO @ Thu, 09 Dec 2021 03:42:02: #2 Build Peak Model... INFO @ Thu, 09 Dec 2021 03:42:02: #2 looking for paired plus/minus strand peaks... INFO @ Thu, 09 Dec 2021 03:42:02: #2 number of paired peaks: 535 WARNING @ Thu, 09 Dec 2021 03:42:02: Fewer paired peaks (535) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 535 pairs to build model! INFO @ Thu, 09 Dec 2021 03:42:02: start model_add_line... INFO @ Thu, 09 Dec 2021 03:42:02: start X-correlation... INFO @ Thu, 09 Dec 2021 03:42:02: end of X-cor INFO @ Thu, 09 Dec 2021 03:42:02: #2 finished! INFO @ Thu, 09 Dec 2021 03:42:02: #2 predicted fragment length is 265 bps INFO @ Thu, 09 Dec 2021 03:42:02: #2 alternative fragment length(s) may be 14,60,265,597 bps INFO @ Thu, 09 Dec 2021 03:42:02: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.20_model.r WARNING @ Thu, 09 Dec 2021 03:42:02: #2 Since the d (265) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Thu, 09 Dec 2021 03:42:02: #2 You may need to consider one of the other alternative d(s): 14,60,265,597 WARNING @ Thu, 09 Dec 2021 03:42:02: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Thu, 09 Dec 2021 03:42:02: #3 Call peaks... INFO @ Thu, 09 Dec 2021 03:42:02: #3 Pre-compute pvalue-qvalue table... INFO @ Thu, 09 Dec 2021 03:42:02: #3 Call peaks for each chromosome... INFO @ Thu, 09 Dec 2021 03:42:02: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.20_peaks.xls INFO @ Thu, 09 Dec 2021 03:42:02: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.20_peaks.narrowPeak INFO @ Thu, 09 Dec 2021 03:42:02: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX10399023/SRX10399023.20_summits.bed INFO @ Thu, 09 Dec 2021 03:42:02: Done! pass1 - making usageList (4 chroms): 0 millis pass2 - checking and writing primary data (4 records, 4 fields): 1 millis CompletedMACS2peakCalling