Job ID = 5791689 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... 2020-04-22T01:29:25 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) 2020-04-22T01:29:36 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) 2020-04-22T01:29:36 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) 2020-04-22T01:29:36 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) 2020-04-22T01:29:36 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) spots read : 9,585,422 reads read : 19,170,844 reads written : 9,585,422 reads 0-length : 9,585,422 rm: cannot remove ‘[DSE]RR*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:01:53 9585422 reads; of these: 9585422 (100.00%) were unpaired; of these: 729282 (7.61%) aligned 0 times 7783954 (81.21%) aligned exactly 1 time 1072186 (11.19%) aligned >1 times 92.39% overall alignment rate Time searching: 00:01:53 Overall time: 00:01:53 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 17 sequences. [bam_rmdupse_core] 3026837 / 8856140 = 0.3418 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Wed, 22 Apr 2020 10:35:48: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 22 Apr 2020 10:35:48: #1 read tag files... INFO @ Wed, 22 Apr 2020 10:35:48: #1 read treatment tags... INFO @ Wed, 22 Apr 2020 10:35:54: 1000000 INFO @ Wed, 22 Apr 2020 10:36:00: 2000000 INFO @ Wed, 22 Apr 2020 10:36:05: 3000000 INFO @ Wed, 22 Apr 2020 10:36:11: 4000000 WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Wed, 22 Apr 2020 10:36:17: 5000000 INFO @ Wed, 22 Apr 2020 10:36:18: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 22 Apr 2020 10:36:18: #1 read tag files... INFO @ Wed, 22 Apr 2020 10:36:18: #1 read treatment tags... INFO @ Wed, 22 Apr 2020 10:36:22: #1 tag size is determined as 101 bps INFO @ Wed, 22 Apr 2020 10:36:22: #1 tag size = 101 INFO @ Wed, 22 Apr 2020 10:36:22: #1 total tags in treatment: 5829303 INFO @ Wed, 22 Apr 2020 10:36:22: #1 user defined the maximum tags... INFO @ Wed, 22 Apr 2020 10:36:22: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 22 Apr 2020 10:36:22: #1 tags after filtering in treatment: 5829303 INFO @ Wed, 22 Apr 2020 10:36:22: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 22 Apr 2020 10:36:22: #1 finished! INFO @ Wed, 22 Apr 2020 10:36:22: #2 Build Peak Model... INFO @ Wed, 22 Apr 2020 10:36:22: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 22 Apr 2020 10:36:23: #2 number of paired peaks: 0 WARNING @ Wed, 22 Apr 2020 10:36:23: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 22 Apr 2020 10:36:23: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 2 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling INFO @ Wed, 22 Apr 2020 10:36:24: 1000000 INFO @ Wed, 22 Apr 2020 10:36:30: 2000000 INFO @ Wed, 22 Apr 2020 10:36:36: 3000000 INFO @ Wed, 22 Apr 2020 10:36:41: 4000000 BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Wed, 22 Apr 2020 10:36:47: 5000000 INFO @ Wed, 22 Apr 2020 10:36:48: # Command line: callpeak -t /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.bam -f BAM -g 12100000 -n /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.bam'] # control file = None # effective genome size = 1.21e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Wed, 22 Apr 2020 10:36:48: #1 read tag files... INFO @ Wed, 22 Apr 2020 10:36:48: #1 read treatment tags... INFO @ Wed, 22 Apr 2020 10:36:52: #1 tag size is determined as 101 bps INFO @ Wed, 22 Apr 2020 10:36:52: #1 tag size = 101 INFO @ Wed, 22 Apr 2020 10:36:52: #1 total tags in treatment: 5829303 INFO @ Wed, 22 Apr 2020 10:36:52: #1 user defined the maximum tags... INFO @ Wed, 22 Apr 2020 10:36:52: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 22 Apr 2020 10:36:52: #1 tags after filtering in treatment: 5829303 INFO @ Wed, 22 Apr 2020 10:36:52: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 22 Apr 2020 10:36:52: #1 finished! INFO @ Wed, 22 Apr 2020 10:36:52: #2 Build Peak Model... INFO @ Wed, 22 Apr 2020 10:36:52: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 22 Apr 2020 10:36:53: #2 number of paired peaks: 0 WARNING @ Wed, 22 Apr 2020 10:36:53: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 22 Apr 2020 10:36:53: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling INFO @ Wed, 22 Apr 2020 10:36:54: 1000000 INFO @ Wed, 22 Apr 2020 10:37:00: 2000000 INFO @ Wed, 22 Apr 2020 10:37:06: 3000000 INFO @ Wed, 22 Apr 2020 10:37:12: 4000000 INFO @ Wed, 22 Apr 2020 10:37:18: 5000000 INFO @ Wed, 22 Apr 2020 10:37:23: #1 tag size is determined as 101 bps INFO @ Wed, 22 Apr 2020 10:37:23: #1 tag size = 101 INFO @ Wed, 22 Apr 2020 10:37:23: #1 total tags in treatment: 5829303 INFO @ Wed, 22 Apr 2020 10:37:23: #1 user defined the maximum tags... INFO @ Wed, 22 Apr 2020 10:37:23: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Wed, 22 Apr 2020 10:37:23: #1 tags after filtering in treatment: 5829303 INFO @ Wed, 22 Apr 2020 10:37:23: #1 Redundant rate of treatment: 0.00 INFO @ Wed, 22 Apr 2020 10:37:23: #1 finished! INFO @ Wed, 22 Apr 2020 10:37:23: #2 Build Peak Model... INFO @ Wed, 22 Apr 2020 10:37:23: #2 looking for paired plus/minus strand peaks... INFO @ Wed, 22 Apr 2020 10:37:23: #2 number of paired peaks: 0 WARNING @ Wed, 22 Apr 2020 10:37:23: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Wed, 22 Apr 2020 10:37:23: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 3 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/sacCer3/SRX7587250/SRX7587250.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。