Job ID = 12266086 SRX = SRX7282614 Genome = dm6 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:00:01 10657 reads; of these: 10657 (100.00%) were unpaired; of these: 9572 (89.82%) aligned 0 times 734 (6.89%) aligned exactly 1 time 351 (3.29%) aligned >1 times 10.18% overall alignment rate Time searching: 00:00:01 Overall time: 00:00:01 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 1870 sequences. [bam_rmdupse_core] 645 / 1085 = 0.5945 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.7.1/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 03 Apr 2021 08:47:20: # Command line: callpeak -t /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.bam -f BAM -g dm -n /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.bam'] # control file = None # effective genome size = 1.20e+08 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 03 Apr 2021 08:47:20: #1 read tag files... INFO @ Sat, 03 Apr 2021 08:47:20: #1 read treatment tags... INFO @ Sat, 03 Apr 2021 08:47:20: #1 tag size is determined as 54 bps INFO @ Sat, 03 Apr 2021 08:47:20: #1 tag size = 54 INFO @ Sat, 03 Apr 2021 08:47:20: #1 total tags in treatment: 440 INFO @ Sat, 03 Apr 2021 08:47:20: #1 user defined the maximum tags... INFO @ Sat, 03 Apr 2021 08:47:20: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 03 Apr 2021 08:47:20: #1 tags after filtering in treatment: 388 INFO @ Sat, 03 Apr 2021 08:47:20: #1 Redundant rate of treatment: 0.12 INFO @ Sat, 03 Apr 2021 08:47:20: #1 finished! INFO @ Sat, 03 Apr 2021 08:47:20: #2 Build Peak Model... INFO @ Sat, 03 Apr 2021 08:47:20: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 03 Apr 2021 08:47:20: #2 number of paired peaks: 0 WARNING @ Sat, 03 Apr 2021 08:47:20: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 03 Apr 2021 08:47:20: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.05_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.05_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.05_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.05_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling WARNING: Skipping mount /opt/pkg/singularity/3.7.1/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Sat, 03 Apr 2021 08:47:50: # Command line: callpeak -t /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.bam -f BAM -g dm -n /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.bam'] # control file = None # effective genome size = 1.20e+08 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 03 Apr 2021 08:47:50: #1 read tag files... INFO @ Sat, 03 Apr 2021 08:47:50: #1 read treatment tags... INFO @ Sat, 03 Apr 2021 08:47:50: #1 tag size is determined as 54 bps INFO @ Sat, 03 Apr 2021 08:47:50: #1 tag size = 54 INFO @ Sat, 03 Apr 2021 08:47:50: #1 total tags in treatment: 440 INFO @ Sat, 03 Apr 2021 08:47:50: #1 user defined the maximum tags... INFO @ Sat, 03 Apr 2021 08:47:50: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 03 Apr 2021 08:47:50: #1 tags after filtering in treatment: 388 INFO @ Sat, 03 Apr 2021 08:47:50: #1 Redundant rate of treatment: 0.12 INFO @ Sat, 03 Apr 2021 08:47:50: #1 finished! INFO @ Sat, 03 Apr 2021 08:47:50: #2 Build Peak Model... INFO @ Sat, 03 Apr 2021 08:47:50: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 03 Apr 2021 08:47:50: #2 number of paired peaks: 0 WARNING @ Sat, 03 Apr 2021 08:47:50: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 03 Apr 2021 08:47:50: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.10_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.10_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.10_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.10_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.7.1/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。 INFO @ Sat, 03 Apr 2021 08:48:20: # Command line: callpeak -t /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.bam -f BAM -g dm -n /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.bam'] # control file = None # effective genome size = 1.20e+08 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Sat, 03 Apr 2021 08:48:20: #1 read tag files... INFO @ Sat, 03 Apr 2021 08:48:20: #1 read treatment tags... INFO @ Sat, 03 Apr 2021 08:48:20: #1 tag size is determined as 54 bps INFO @ Sat, 03 Apr 2021 08:48:20: #1 tag size = 54 INFO @ Sat, 03 Apr 2021 08:48:20: #1 total tags in treatment: 440 INFO @ Sat, 03 Apr 2021 08:48:20: #1 user defined the maximum tags... INFO @ Sat, 03 Apr 2021 08:48:20: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Sat, 03 Apr 2021 08:48:20: #1 tags after filtering in treatment: 388 INFO @ Sat, 03 Apr 2021 08:48:20: #1 Redundant rate of treatment: 0.12 INFO @ Sat, 03 Apr 2021 08:48:20: #1 finished! INFO @ Sat, 03 Apr 2021 08:48:20: #2 Build Peak Model... INFO @ Sat, 03 Apr 2021 08:48:20: #2 looking for paired plus/minus strand peaks... INFO @ Sat, 03 Apr 2021 08:48:20: #2 number of paired peaks: 0 WARNING @ Sat, 03 Apr 2021 08:48:20: Too few paired peaks (0) so I can not build the model! Broader your MFOLD range parameter may erase this error. If it still can't build the model, we suggest to use --nomodel and --extsize 147 or other fixed number instead. WARNING @ Sat, 03 Apr 2021 08:48:20: Process for pairing-model is terminated! cut: /home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.20_peaks.narrowPeak: No such file or directory pass1 - making usageList (0 chroms): 1 millis needLargeMem: trying to allocate 0 bytes (limit: 17179869184) rm: cannot remove ‘/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.20_model.r’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.20_*.xls’: No such file or directory rm: cannot remove ‘/home/okishinya/chipatlas/results/dm6/SRX7282614/SRX7282614.20_peaks.narrowPeak’: No such file or directory CompletedMACS2peakCalling