Job ID = 1298162 sra ファイルのダウンロード中... Read layout: PAIRED fastq に変換中... 2019-06-03T08:10:50 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) 2019-06-03T08:10:50 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) 2019-06-03T08:13:01 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) 2019-06-03T08:14:03 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) 2019-06-03T08:14:03 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) 2019-06-03T08:14:03 fasterq-dump.2.9.6 sys: timeout exhausted while reading file within network system module - mbedtls_ssl_read returned -76 ( NET - Reading information from the socket failed ) spots read : 13,585,306 reads read : 27,170,612 reads written : 27,170,612 rm: cannot remove ‘[DSE]RR*’: No such file or directory rm: cannot remove ‘fastqDump_tmp*’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:01 Multiseed full-index search: 00:03:21 13585306 reads; of these: 13585306 (100.00%) were paired; of these: 13222955 (97.33%) aligned concordantly 0 times 263683 (1.94%) aligned concordantly exactly 1 time 98668 (0.73%) aligned concordantly >1 times ---- 13222955 pairs aligned concordantly 0 times; of these: 1443 (0.01%) aligned discordantly 1 time ---- 13221512 pairs aligned 0 times concordantly or discordantly; of these: 26443024 mates make up the pairs; of these: 26111726 (98.75%) aligned 0 times 106199 (0.40%) aligned exactly 1 time 225099 (0.85%) aligned >1 times 3.90% overall alignment rate Time searching: 00:03:22 Overall time: 00:03:22 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 15 sequences. [bam_rmdup_core] processing reference chr2L... [bam_rmdup_core] processing reference chr2LHet... [bam_rmdup_core] processing reference chr2R... [bam_rmdup_core] processing reference chr2RHet... [bam_rmdup_core] processing reference chr3L... [bam_rmdup_core] processing reference chr3LHet... [bam_rmdup_core] processing reference chr3R... [bam_rmdup_core] processing reference chr3RHet... [bam_rmdup_core] processing reference chr4... [bam_rmdup_core] processing reference chrM... [bam_rmdup_core] processing reference chrU... [bam_rmdup_core] processing reference chrUextra... [bam_rmdup_core] processing reference chrX... [bam_rmdup_core] processing reference chrXHet... [bam_rmdup_core] processing reference chrYHet... [bam_rmdup_core] 8042 / 362811 = 0.0222 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Mon, 03 Jun 2019 17:19:25: # Command line: callpeak -t /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.bam -f BAM -g dm -n /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.bam'] # control file = None # effective genome size = 1.20e+08 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Mon, 03 Jun 2019 17:19:25: #1 read tag files... INFO @ Mon, 03 Jun 2019 17:19:25: #1 read treatment tags... INFO @ Mon, 03 Jun 2019 17:19:25: # Command line: callpeak -t /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.bam -f BAM -g dm -n /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.bam'] # control file = None # effective genome size = 1.20e+08 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Mon, 03 Jun 2019 17:19:25: #1 read tag files... INFO @ Mon, 03 Jun 2019 17:19:25: #1 read treatment tags... INFO @ Mon, 03 Jun 2019 17:19:25: # Command line: callpeak -t /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.bam -f BAM -g dm -n /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.bam'] # control file = None # effective genome size = 1.20e+08 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Mon, 03 Jun 2019 17:19:25: #1 read tag files... INFO @ Mon, 03 Jun 2019 17:19:25: #1 read treatment tags... INFO @ Mon, 03 Jun 2019 17:19:31: 1000000 INFO @ Mon, 03 Jun 2019 17:19:31: #1 tag size is determined as 39 bps INFO @ Mon, 03 Jun 2019 17:19:31: #1 tag size = 39 INFO @ Mon, 03 Jun 2019 17:19:31: #1 total tags in treatment: 354321 INFO @ Mon, 03 Jun 2019 17:19:31: #1 user defined the maximum tags... INFO @ Mon, 03 Jun 2019 17:19:31: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Mon, 03 Jun 2019 17:19:31: #1 tags after filtering in treatment: 350462 INFO @ Mon, 03 Jun 2019 17:19:31: #1 Redundant rate of treatment: 0.01 INFO @ Mon, 03 Jun 2019 17:19:31: #1 finished! INFO @ Mon, 03 Jun 2019 17:19:31: #2 Build Peak Model... INFO @ Mon, 03 Jun 2019 17:19:31: #2 looking for paired plus/minus strand peaks... INFO @ Mon, 03 Jun 2019 17:19:31: 1000000 INFO @ Mon, 03 Jun 2019 17:19:31: #2 number of paired peaks: 935 WARNING @ Mon, 03 Jun 2019 17:19:31: Fewer paired peaks (935) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 935 pairs to build model! INFO @ Mon, 03 Jun 2019 17:19:31: start model_add_line... INFO @ Mon, 03 Jun 2019 17:19:31: start X-correlation... INFO @ Mon, 03 Jun 2019 17:19:31: end of X-cor INFO @ Mon, 03 Jun 2019 17:19:31: #2 finished! INFO @ Mon, 03 Jun 2019 17:19:31: #2 predicted fragment length is 96 bps INFO @ Mon, 03 Jun 2019 17:19:31: #2 alternative fragment length(s) may be 96,159 bps INFO @ Mon, 03 Jun 2019 17:19:31: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.20_model.r INFO @ Mon, 03 Jun 2019 17:19:31: #3 Call peaks... INFO @ Mon, 03 Jun 2019 17:19:31: #3 Pre-compute pvalue-qvalue table... INFO @ Mon, 03 Jun 2019 17:19:32: #1 tag size is determined as 39 bps INFO @ Mon, 03 Jun 2019 17:19:32: #1 tag size = 39 INFO @ Mon, 03 Jun 2019 17:19:32: #1 total tags in treatment: 354321 INFO @ Mon, 03 Jun 2019 17:19:32: #1 user defined the maximum tags... INFO @ Mon, 03 Jun 2019 17:19:32: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Mon, 03 Jun 2019 17:19:32: #1 tags after filtering in treatment: 350462 INFO @ Mon, 03 Jun 2019 17:19:32: #1 Redundant rate of treatment: 0.01 INFO @ Mon, 03 Jun 2019 17:19:32: #1 finished! INFO @ Mon, 03 Jun 2019 17:19:32: #2 Build Peak Model... INFO @ Mon, 03 Jun 2019 17:19:32: #2 looking for paired plus/minus strand peaks... INFO @ Mon, 03 Jun 2019 17:19:32: #2 number of paired peaks: 935 WARNING @ Mon, 03 Jun 2019 17:19:32: Fewer paired peaks (935) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 935 pairs to build model! INFO @ Mon, 03 Jun 2019 17:19:32: start model_add_line... INFO @ Mon, 03 Jun 2019 17:19:32: start X-correlation... INFO @ Mon, 03 Jun 2019 17:19:32: end of X-cor INFO @ Mon, 03 Jun 2019 17:19:32: #2 finished! INFO @ Mon, 03 Jun 2019 17:19:32: #2 predicted fragment length is 96 bps INFO @ Mon, 03 Jun 2019 17:19:32: #2 alternative fragment length(s) may be 96,159 bps INFO @ Mon, 03 Jun 2019 17:19:32: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.10_model.r INFO @ Mon, 03 Jun 2019 17:19:32: #3 Call peaks... INFO @ Mon, 03 Jun 2019 17:19:32: #3 Pre-compute pvalue-qvalue table... INFO @ Mon, 03 Jun 2019 17:19:33: #3 Call peaks for each chromosome... INFO @ Mon, 03 Jun 2019 17:19:33: 1000000 INFO @ Mon, 03 Jun 2019 17:19:33: #3 Call peaks for each chromosome... INFO @ Mon, 03 Jun 2019 17:19:33: #1 tag size is determined as 39 bps INFO @ Mon, 03 Jun 2019 17:19:33: #1 tag size = 39 INFO @ Mon, 03 Jun 2019 17:19:33: #1 total tags in treatment: 354321 INFO @ Mon, 03 Jun 2019 17:19:33: #1 user defined the maximum tags... INFO @ Mon, 03 Jun 2019 17:19:33: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Mon, 03 Jun 2019 17:19:33: #1 tags after filtering in treatment: 350462 INFO @ Mon, 03 Jun 2019 17:19:33: #1 Redundant rate of treatment: 0.01 INFO @ Mon, 03 Jun 2019 17:19:33: #1 finished! INFO @ Mon, 03 Jun 2019 17:19:33: #2 Build Peak Model... INFO @ Mon, 03 Jun 2019 17:19:33: #2 looking for paired plus/minus strand peaks... INFO @ Mon, 03 Jun 2019 17:19:33: #4 Write output xls file... /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.20_peaks.xls INFO @ Mon, 03 Jun 2019 17:19:33: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.20_peaks.narrowPeak INFO @ Mon, 03 Jun 2019 17:19:33: #4 Write summits bed file... /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.20_summits.bed INFO @ Mon, 03 Jun 2019 17:19:33: Done! INFO @ Mon, 03 Jun 2019 17:19:33: #2 number of paired peaks: 935 WARNING @ Mon, 03 Jun 2019 17:19:33: Fewer paired peaks (935) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 935 pairs to build model! INFO @ Mon, 03 Jun 2019 17:19:33: start model_add_line... INFO @ Mon, 03 Jun 2019 17:19:33: start X-correlation... INFO @ Mon, 03 Jun 2019 17:19:33: end of X-cor INFO @ Mon, 03 Jun 2019 17:19:33: #2 finished! INFO @ Mon, 03 Jun 2019 17:19:33: #2 predicted fragment length is 96 bps INFO @ Mon, 03 Jun 2019 17:19:33: #2 alternative fragment length(s) may be 96,159 bps INFO @ Mon, 03 Jun 2019 17:19:33: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.05_model.r INFO @ Mon, 03 Jun 2019 17:19:33: #3 Call peaks... INFO @ Mon, 03 Jun 2019 17:19:33: #3 Pre-compute pvalue-qvalue table... pass1 - making usageList (3 chroms): 1 millis pass2 - checking and writing primary data (30 records, 4 fields): 1 millis CompletedMACS2peakCalling INFO @ Mon, 03 Jun 2019 17:19:34: #4 Write output xls file... /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.10_peaks.xls INFO @ Mon, 03 Jun 2019 17:19:34: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.10_peaks.narrowPeak INFO @ Mon, 03 Jun 2019 17:19:34: #4 Write summits bed file... /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.10_summits.bed INFO @ Mon, 03 Jun 2019 17:19:34: Done! pass1 - making usageList (4 chroms): 1 millis pass2 - checking and writing primary data (47 records, 4 fields): 2 millis CompletedMACS2peakCalling INFO @ Mon, 03 Jun 2019 17:19:34: #3 Call peaks for each chromosome... INFO @ Mon, 03 Jun 2019 17:19:35: #4 Write output xls file... /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.05_peaks.xls INFO @ Mon, 03 Jun 2019 17:19:35: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.05_peaks.narrowPeak INFO @ Mon, 03 Jun 2019 17:19:35: #4 Write summits bed file... /home/okishinya/chipatlas/results/dm3/SRX4650890/SRX4650890.05_summits.bed INFO @ Mon, 03 Jun 2019 17:19:35: Done! pass1 - making usageList (7 chroms): 1 millis pass2 - checking and writing primary data (84 records, 4 fields): 2 millis CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。