Job ID = 6367117 SRX = SRX277074 Genome = ce11 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... 2020-06-15T23:18:31 prefetch.2.10.7: 1) Downloading 'SRR849750'... 2020-06-15T23:18:31 prefetch.2.10.7: Downloading via HTTPS... 2020-06-15T23:19:00 prefetch.2.10.7: HTTPS download succeed 2020-06-15T23:19:00 prefetch.2.10.7: 'SRR849750' is valid 2020-06-15T23:19:00 prefetch.2.10.7: 1) 'SRR849750' was downloaded successfully Read 4768767 spots for SRR849750/SRR849750.sra Written 4768767 spots for SRR849750/SRR849750.sra fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:00:43 4768767 reads; of these: 4768767 (100.00%) were unpaired; of these: 834462 (17.50%) aligned 0 times 3296237 (69.12%) aligned exactly 1 time 638068 (13.38%) aligned >1 times 82.50% overall alignment rate Time searching: 00:00:43 Overall time: 00:00:43 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 7 sequences. [bam_rmdupse_core] 330225 / 3934305 = 0.0839 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Tue, 16 Jun 2020 08:21:13: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 16 Jun 2020 08:21:13: #1 read tag files... INFO @ Tue, 16 Jun 2020 08:21:13: #1 read treatment tags... INFO @ Tue, 16 Jun 2020 08:21:19: 1000000 INFO @ Tue, 16 Jun 2020 08:21:26: 2000000 INFO @ Tue, 16 Jun 2020 08:21:32: 3000000 INFO @ Tue, 16 Jun 2020 08:21:35: #1 tag size is determined as 32 bps INFO @ Tue, 16 Jun 2020 08:21:35: #1 tag size = 32 INFO @ Tue, 16 Jun 2020 08:21:35: #1 total tags in treatment: 3604080 INFO @ Tue, 16 Jun 2020 08:21:35: #1 user defined the maximum tags... INFO @ Tue, 16 Jun 2020 08:21:35: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 16 Jun 2020 08:21:36: #1 tags after filtering in treatment: 3604080 INFO @ Tue, 16 Jun 2020 08:21:36: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 16 Jun 2020 08:21:36: #1 finished! INFO @ Tue, 16 Jun 2020 08:21:36: #2 Build Peak Model... INFO @ Tue, 16 Jun 2020 08:21:36: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 16 Jun 2020 08:21:36: #2 number of paired peaks: 404 WARNING @ Tue, 16 Jun 2020 08:21:36: Fewer paired peaks (404) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 404 pairs to build model! INFO @ Tue, 16 Jun 2020 08:21:36: start model_add_line... INFO @ Tue, 16 Jun 2020 08:21:36: start X-correlation... INFO @ Tue, 16 Jun 2020 08:21:36: end of X-cor INFO @ Tue, 16 Jun 2020 08:21:36: #2 finished! INFO @ Tue, 16 Jun 2020 08:21:36: #2 predicted fragment length is 31 bps INFO @ Tue, 16 Jun 2020 08:21:36: #2 alternative fragment length(s) may be 4,31,424,428,537,578,586 bps INFO @ Tue, 16 Jun 2020 08:21:36: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.05_model.r WARNING @ Tue, 16 Jun 2020 08:21:36: #2 Since the d (31) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Tue, 16 Jun 2020 08:21:36: #2 You may need to consider one of the other alternative d(s): 4,31,424,428,537,578,586 WARNING @ Tue, 16 Jun 2020 08:21:36: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Tue, 16 Jun 2020 08:21:36: #3 Call peaks... INFO @ Tue, 16 Jun 2020 08:21:36: #3 Pre-compute pvalue-qvalue table... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Tue, 16 Jun 2020 08:21:42: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 16 Jun 2020 08:21:42: #1 read tag files... INFO @ Tue, 16 Jun 2020 08:21:42: #1 read treatment tags... INFO @ Tue, 16 Jun 2020 08:21:44: #3 Call peaks for each chromosome... INFO @ Tue, 16 Jun 2020 08:21:47: #4 Write output xls file... /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.05_peaks.xls INFO @ Tue, 16 Jun 2020 08:21:47: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.05_peaks.narrowPeak INFO @ Tue, 16 Jun 2020 08:21:47: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.05_summits.bed INFO @ Tue, 16 Jun 2020 08:21:47: Done! pass1 - making usageList (6 chroms): 0 millis pass2 - checking and writing primary data (359 records, 4 fields): 2 millis CompletedMACS2peakCalling INFO @ Tue, 16 Jun 2020 08:21:48: 1000000 INFO @ Tue, 16 Jun 2020 08:21:53: 2000000 INFO @ Tue, 16 Jun 2020 08:21:58: 3000000 INFO @ Tue, 16 Jun 2020 08:22:01: #1 tag size is determined as 32 bps INFO @ Tue, 16 Jun 2020 08:22:01: #1 tag size = 32 INFO @ Tue, 16 Jun 2020 08:22:01: #1 total tags in treatment: 3604080 INFO @ Tue, 16 Jun 2020 08:22:01: #1 user defined the maximum tags... INFO @ Tue, 16 Jun 2020 08:22:01: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 16 Jun 2020 08:22:01: #1 tags after filtering in treatment: 3604080 INFO @ Tue, 16 Jun 2020 08:22:01: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 16 Jun 2020 08:22:01: #1 finished! INFO @ Tue, 16 Jun 2020 08:22:01: #2 Build Peak Model... INFO @ Tue, 16 Jun 2020 08:22:01: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 16 Jun 2020 08:22:02: #2 number of paired peaks: 404 WARNING @ Tue, 16 Jun 2020 08:22:02: Fewer paired peaks (404) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 404 pairs to build model! INFO @ Tue, 16 Jun 2020 08:22:02: start model_add_line... INFO @ Tue, 16 Jun 2020 08:22:02: start X-correlation... INFO @ Tue, 16 Jun 2020 08:22:02: end of X-cor INFO @ Tue, 16 Jun 2020 08:22:02: #2 finished! INFO @ Tue, 16 Jun 2020 08:22:02: #2 predicted fragment length is 31 bps INFO @ Tue, 16 Jun 2020 08:22:02: #2 alternative fragment length(s) may be 4,31,424,428,537,578,586 bps INFO @ Tue, 16 Jun 2020 08:22:02: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.10_model.r WARNING @ Tue, 16 Jun 2020 08:22:02: #2 Since the d (31) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Tue, 16 Jun 2020 08:22:02: #2 You may need to consider one of the other alternative d(s): 4,31,424,428,537,578,586 WARNING @ Tue, 16 Jun 2020 08:22:02: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Tue, 16 Jun 2020 08:22:02: #3 Call peaks... INFO @ Tue, 16 Jun 2020 08:22:02: #3 Pre-compute pvalue-qvalue table... INFO @ Tue, 16 Jun 2020 08:22:10: #3 Call peaks for each chromosome... BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Tue, 16 Jun 2020 08:22:13: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 16 Jun 2020 08:22:13: #1 read tag files... INFO @ Tue, 16 Jun 2020 08:22:13: #1 read treatment tags... INFO @ Tue, 16 Jun 2020 08:22:14: #4 Write output xls file... /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.10_peaks.xls INFO @ Tue, 16 Jun 2020 08:22:14: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.10_peaks.narrowPeak INFO @ Tue, 16 Jun 2020 08:22:14: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.10_summits.bed INFO @ Tue, 16 Jun 2020 08:22:14: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (185 records, 4 fields): 1 millis CompletedMACS2peakCalling INFO @ Tue, 16 Jun 2020 08:22:18: 1000000 INFO @ Tue, 16 Jun 2020 08:22:24: 2000000 BedGraph に変換しました。 BigWig に変換中... INFO @ Tue, 16 Jun 2020 08:22:30: 3000000 INFO @ Tue, 16 Jun 2020 08:22:33: #1 tag size is determined as 32 bps INFO @ Tue, 16 Jun 2020 08:22:33: #1 tag size = 32 INFO @ Tue, 16 Jun 2020 08:22:33: #1 total tags in treatment: 3604080 INFO @ Tue, 16 Jun 2020 08:22:33: #1 user defined the maximum tags... INFO @ Tue, 16 Jun 2020 08:22:33: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 16 Jun 2020 08:22:33: #1 tags after filtering in treatment: 3604080 INFO @ Tue, 16 Jun 2020 08:22:33: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 16 Jun 2020 08:22:33: #1 finished! INFO @ Tue, 16 Jun 2020 08:22:33: #2 Build Peak Model... INFO @ Tue, 16 Jun 2020 08:22:33: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 16 Jun 2020 08:22:34: #2 number of paired peaks: 404 WARNING @ Tue, 16 Jun 2020 08:22:34: Fewer paired peaks (404) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 404 pairs to build model! INFO @ Tue, 16 Jun 2020 08:22:34: start model_add_line... INFO @ Tue, 16 Jun 2020 08:22:34: start X-correlation... INFO @ Tue, 16 Jun 2020 08:22:34: end of X-cor INFO @ Tue, 16 Jun 2020 08:22:34: #2 finished! INFO @ Tue, 16 Jun 2020 08:22:34: #2 predicted fragment length is 31 bps INFO @ Tue, 16 Jun 2020 08:22:34: #2 alternative fragment length(s) may be 4,31,424,428,537,578,586 bps INFO @ Tue, 16 Jun 2020 08:22:34: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.20_model.r WARNING @ Tue, 16 Jun 2020 08:22:34: #2 Since the d (31) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Tue, 16 Jun 2020 08:22:34: #2 You may need to consider one of the other alternative d(s): 4,31,424,428,537,578,586 WARNING @ Tue, 16 Jun 2020 08:22:34: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Tue, 16 Jun 2020 08:22:34: #3 Call peaks... INFO @ Tue, 16 Jun 2020 08:22:34: #3 Pre-compute pvalue-qvalue table... BigWig に変換しました。 INFO @ Tue, 16 Jun 2020 08:22:41: #3 Call peaks for each chromosome... INFO @ Tue, 16 Jun 2020 08:22:45: #4 Write output xls file... /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.20_peaks.xls INFO @ Tue, 16 Jun 2020 08:22:45: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.20_peaks.narrowPeak INFO @ Tue, 16 Jun 2020 08:22:45: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce11/SRX277074/SRX277074.20_summits.bed INFO @ Tue, 16 Jun 2020 08:22:45: Done! pass1 - making usageList (6 chroms): 0 millis pass2 - checking and writing primary data (54 records, 4 fields): 1 millis CompletedMACS2peakCalling