Job ID = 14160696 SRX = SRX10399021 Genome = ce11 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:01:56 8400752 reads; of these: 8400752 (100.00%) were unpaired; of these: 76747 (0.91%) aligned 0 times 7041827 (83.82%) aligned exactly 1 time 1282178 (15.26%) aligned >1 times 99.09% overall alignment rate Time searching: 00:01:56 Overall time: 00:01:56 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 7 sequences. [bam_rmdupse_core] 595657 / 8324005 = 0.0716 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Thu, 09 Dec 2021 03:50:08: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Thu, 09 Dec 2021 03:50:08: #1 read tag files... INFO @ Thu, 09 Dec 2021 03:50:08: #1 read treatment tags... INFO @ Thu, 09 Dec 2021 03:50:15: 1000000 INFO @ Thu, 09 Dec 2021 03:50:22: 2000000 INFO @ Thu, 09 Dec 2021 03:50:29: 3000000 INFO @ Thu, 09 Dec 2021 03:50:36: 4000000 WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Thu, 09 Dec 2021 03:50:38: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Thu, 09 Dec 2021 03:50:38: #1 read tag files... INFO @ Thu, 09 Dec 2021 03:50:38: #1 read treatment tags... INFO @ Thu, 09 Dec 2021 03:50:44: 5000000 INFO @ Thu, 09 Dec 2021 03:50:45: 1000000 INFO @ Thu, 09 Dec 2021 03:50:51: 6000000 INFO @ Thu, 09 Dec 2021 03:50:51: 2000000 INFO @ Thu, 09 Dec 2021 03:50:58: 3000000 INFO @ Thu, 09 Dec 2021 03:50:59: 7000000 INFO @ Thu, 09 Dec 2021 03:51:04: #1 tag size is determined as 51 bps INFO @ Thu, 09 Dec 2021 03:51:04: #1 tag size = 51 INFO @ Thu, 09 Dec 2021 03:51:04: #1 total tags in treatment: 7728348 INFO @ Thu, 09 Dec 2021 03:51:04: #1 user defined the maximum tags... INFO @ Thu, 09 Dec 2021 03:51:04: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Thu, 09 Dec 2021 03:51:04: #1 tags after filtering in treatment: 7728348 INFO @ Thu, 09 Dec 2021 03:51:04: #1 Redundant rate of treatment: 0.00 INFO @ Thu, 09 Dec 2021 03:51:04: #1 finished! INFO @ Thu, 09 Dec 2021 03:51:04: #2 Build Peak Model... INFO @ Thu, 09 Dec 2021 03:51:04: #2 looking for paired plus/minus strand peaks... INFO @ Thu, 09 Dec 2021 03:51:04: 4000000 INFO @ Thu, 09 Dec 2021 03:51:05: #2 number of paired peaks: 318 WARNING @ Thu, 09 Dec 2021 03:51:05: Fewer paired peaks (318) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 318 pairs to build model! INFO @ Thu, 09 Dec 2021 03:51:05: start model_add_line... INFO @ Thu, 09 Dec 2021 03:51:05: start X-correlation... INFO @ Thu, 09 Dec 2021 03:51:05: end of X-cor INFO @ Thu, 09 Dec 2021 03:51:05: #2 finished! INFO @ Thu, 09 Dec 2021 03:51:05: #2 predicted fragment length is 50 bps INFO @ Thu, 09 Dec 2021 03:51:05: #2 alternative fragment length(s) may be 4,50,522,556,580 bps INFO @ Thu, 09 Dec 2021 03:51:05: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.05_model.r WARNING @ Thu, 09 Dec 2021 03:51:05: #2 Since the d (50) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Thu, 09 Dec 2021 03:51:05: #2 You may need to consider one of the other alternative d(s): 4,50,522,556,580 WARNING @ Thu, 09 Dec 2021 03:51:05: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Thu, 09 Dec 2021 03:51:05: #3 Call peaks... INFO @ Thu, 09 Dec 2021 03:51:05: #3 Pre-compute pvalue-qvalue table... BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.8.3/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Thu, 09 Dec 2021 03:51:08: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Thu, 09 Dec 2021 03:51:08: #1 read tag files... INFO @ Thu, 09 Dec 2021 03:51:08: #1 read treatment tags... INFO @ Thu, 09 Dec 2021 03:51:11: 5000000 INFO @ Thu, 09 Dec 2021 03:51:15: 1000000 INFO @ Thu, 09 Dec 2021 03:51:17: 6000000 INFO @ Thu, 09 Dec 2021 03:51:21: 2000000 INFO @ Thu, 09 Dec 2021 03:51:21: #3 Call peaks for each chromosome... INFO @ Thu, 09 Dec 2021 03:51:23: 7000000 INFO @ Thu, 09 Dec 2021 03:51:27: 3000000 INFO @ Thu, 09 Dec 2021 03:51:28: #1 tag size is determined as 51 bps INFO @ Thu, 09 Dec 2021 03:51:28: #1 tag size = 51 INFO @ Thu, 09 Dec 2021 03:51:28: #1 total tags in treatment: 7728348 INFO @ Thu, 09 Dec 2021 03:51:28: #1 user defined the maximum tags... INFO @ Thu, 09 Dec 2021 03:51:28: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Thu, 09 Dec 2021 03:51:28: #1 tags after filtering in treatment: 7728348 INFO @ Thu, 09 Dec 2021 03:51:28: #1 Redundant rate of treatment: 0.00 INFO @ Thu, 09 Dec 2021 03:51:28: #1 finished! INFO @ Thu, 09 Dec 2021 03:51:28: #2 Build Peak Model... INFO @ Thu, 09 Dec 2021 03:51:28: #2 looking for paired plus/minus strand peaks... INFO @ Thu, 09 Dec 2021 03:51:29: #2 number of paired peaks: 318 WARNING @ Thu, 09 Dec 2021 03:51:29: Fewer paired peaks (318) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 318 pairs to build model! INFO @ Thu, 09 Dec 2021 03:51:29: start model_add_line... INFO @ Thu, 09 Dec 2021 03:51:29: start X-correlation... INFO @ Thu, 09 Dec 2021 03:51:29: end of X-cor INFO @ Thu, 09 Dec 2021 03:51:29: #2 finished! INFO @ Thu, 09 Dec 2021 03:51:29: #2 predicted fragment length is 50 bps INFO @ Thu, 09 Dec 2021 03:51:29: #2 alternative fragment length(s) may be 4,50,522,556,580 bps INFO @ Thu, 09 Dec 2021 03:51:29: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.10_model.r WARNING @ Thu, 09 Dec 2021 03:51:29: #2 Since the d (50) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Thu, 09 Dec 2021 03:51:29: #2 You may need to consider one of the other alternative d(s): 4,50,522,556,580 WARNING @ Thu, 09 Dec 2021 03:51:29: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Thu, 09 Dec 2021 03:51:29: #3 Call peaks... INFO @ Thu, 09 Dec 2021 03:51:29: #3 Pre-compute pvalue-qvalue table... INFO @ Thu, 09 Dec 2021 03:51:29: #4 Write output xls file... /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.05_peaks.xls INFO @ Thu, 09 Dec 2021 03:51:29: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.05_peaks.narrowPeak INFO @ Thu, 09 Dec 2021 03:51:29: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.05_summits.bed INFO @ Thu, 09 Dec 2021 03:51:29: Done! pass1 - making usageList (7 chroms): 0 millis pass2 - checking and writing primary data (508 records, 4 fields): 12 millis CompletedMACS2peakCalling INFO @ Thu, 09 Dec 2021 03:51:33: 4000000 INFO @ Thu, 09 Dec 2021 03:51:39: 5000000 BedGraph に変換しました。 BigWig に変換中... INFO @ Thu, 09 Dec 2021 03:51:44: #3 Call peaks for each chromosome... INFO @ Thu, 09 Dec 2021 03:51:45: 6000000 INFO @ Thu, 09 Dec 2021 03:51:51: 7000000 INFO @ Thu, 09 Dec 2021 03:51:52: #4 Write output xls file... /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.10_peaks.xls INFO @ Thu, 09 Dec 2021 03:51:52: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.10_peaks.narrowPeak INFO @ Thu, 09 Dec 2021 03:51:52: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.10_summits.bed INFO @ Thu, 09 Dec 2021 03:51:52: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (301 records, 4 fields): 1 millis CompletedMACS2peakCalling INFO @ Thu, 09 Dec 2021 03:51:55: #1 tag size is determined as 51 bps INFO @ Thu, 09 Dec 2021 03:51:55: #1 tag size = 51 INFO @ Thu, 09 Dec 2021 03:51:55: #1 total tags in treatment: 7728348 INFO @ Thu, 09 Dec 2021 03:51:55: #1 user defined the maximum tags... INFO @ Thu, 09 Dec 2021 03:51:55: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Thu, 09 Dec 2021 03:51:55: #1 tags after filtering in treatment: 7728348 INFO @ Thu, 09 Dec 2021 03:51:55: #1 Redundant rate of treatment: 0.00 INFO @ Thu, 09 Dec 2021 03:51:55: #1 finished! INFO @ Thu, 09 Dec 2021 03:51:55: #2 Build Peak Model... INFO @ Thu, 09 Dec 2021 03:51:55: #2 looking for paired plus/minus strand peaks... INFO @ Thu, 09 Dec 2021 03:51:55: #2 number of paired peaks: 318 WARNING @ Thu, 09 Dec 2021 03:51:55: Fewer paired peaks (318) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 318 pairs to build model! INFO @ Thu, 09 Dec 2021 03:51:55: start model_add_line... INFO @ Thu, 09 Dec 2021 03:51:56: start X-correlation... INFO @ Thu, 09 Dec 2021 03:51:56: end of X-cor INFO @ Thu, 09 Dec 2021 03:51:56: #2 finished! INFO @ Thu, 09 Dec 2021 03:51:56: #2 predicted fragment length is 50 bps INFO @ Thu, 09 Dec 2021 03:51:56: #2 alternative fragment length(s) may be 4,50,522,556,580 bps INFO @ Thu, 09 Dec 2021 03:51:56: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.20_model.r WARNING @ Thu, 09 Dec 2021 03:51:56: #2 Since the d (50) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Thu, 09 Dec 2021 03:51:56: #2 You may need to consider one of the other alternative d(s): 4,50,522,556,580 WARNING @ Thu, 09 Dec 2021 03:51:56: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Thu, 09 Dec 2021 03:51:56: #3 Call peaks... INFO @ Thu, 09 Dec 2021 03:51:56: #3 Pre-compute pvalue-qvalue table... BigWig に変換しました。 INFO @ Thu, 09 Dec 2021 03:52:11: #3 Call peaks for each chromosome... INFO @ Thu, 09 Dec 2021 03:52:18: #4 Write output xls file... /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.20_peaks.xls INFO @ Thu, 09 Dec 2021 03:52:18: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.20_peaks.narrowPeak INFO @ Thu, 09 Dec 2021 03:52:18: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce11/SRX10399021/SRX10399021.20_summits.bed INFO @ Thu, 09 Dec 2021 03:52:19: Done! pass1 - making usageList (6 chroms): 0 millis pass2 - checking and writing primary data (114 records, 4 fields): 2 millis CompletedMACS2peakCalling