Job ID = 6365959 SRX = SRX043971 Genome = ce11 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... 2020-06-15T22:36:36 prefetch.2.10.7: 1) Downloading 'SRR107546'... 2020-06-15T22:36:36 prefetch.2.10.7: Downloading via HTTPS... 2020-06-15T22:37:04 prefetch.2.10.7: HTTPS download succeed 2020-06-15T22:37:05 prefetch.2.10.7: 'SRR107546' is valid 2020-06-15T22:37:05 prefetch.2.10.7: 1) 'SRR107546' was downloaded successfully Read 4294421 spots for SRR107546/SRR107546.sra Written 4294421 spots for SRR107546/SRR107546.sra fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:00:47 4294421 reads; of these: 4294421 (100.00%) were unpaired; of these: 905181 (21.08%) aligned 0 times 2982395 (69.45%) aligned exactly 1 time 406845 (9.47%) aligned >1 times 78.92% overall alignment rate Time searching: 00:00:47 Overall time: 00:00:47 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 7 sequences. [bam_rmdupse_core] 235639 / 3389240 = 0.0695 in library ' ' BAM に変換しました。 Bed ファイルを作成中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Tue, 16 Jun 2020 07:39:34: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 16 Jun 2020 07:39:34: #1 read tag files... INFO @ Tue, 16 Jun 2020 07:39:34: #1 read treatment tags... INFO @ Tue, 16 Jun 2020 07:39:41: 1000000 INFO @ Tue, 16 Jun 2020 07:39:47: 2000000 INFO @ Tue, 16 Jun 2020 07:39:53: 3000000 INFO @ Tue, 16 Jun 2020 07:39:54: #1 tag size is determined as 34 bps INFO @ Tue, 16 Jun 2020 07:39:54: #1 tag size = 34 INFO @ Tue, 16 Jun 2020 07:39:54: #1 total tags in treatment: 3153601 INFO @ Tue, 16 Jun 2020 07:39:54: #1 user defined the maximum tags... INFO @ Tue, 16 Jun 2020 07:39:54: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 16 Jun 2020 07:39:54: #1 tags after filtering in treatment: 3153601 INFO @ Tue, 16 Jun 2020 07:39:54: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 16 Jun 2020 07:39:54: #1 finished! INFO @ Tue, 16 Jun 2020 07:39:54: #2 Build Peak Model... INFO @ Tue, 16 Jun 2020 07:39:54: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 16 Jun 2020 07:39:54: #2 number of paired peaks: 198 WARNING @ Tue, 16 Jun 2020 07:39:54: Fewer paired peaks (198) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 198 pairs to build model! INFO @ Tue, 16 Jun 2020 07:39:54: start model_add_line... INFO @ Tue, 16 Jun 2020 07:39:54: start X-correlation... INFO @ Tue, 16 Jun 2020 07:39:55: end of X-cor INFO @ Tue, 16 Jun 2020 07:39:55: #2 finished! INFO @ Tue, 16 Jun 2020 07:39:55: #2 predicted fragment length is 35 bps INFO @ Tue, 16 Jun 2020 07:39:55: #2 alternative fragment length(s) may be 4,35,176,323,464,466,478,566 bps INFO @ Tue, 16 Jun 2020 07:39:55: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.05_model.r WARNING @ Tue, 16 Jun 2020 07:39:55: #2 Since the d (35) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Tue, 16 Jun 2020 07:39:55: #2 You may need to consider one of the other alternative d(s): 4,35,176,323,464,466,478,566 WARNING @ Tue, 16 Jun 2020 07:39:55: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Tue, 16 Jun 2020 07:39:55: #3 Call peaks... INFO @ Tue, 16 Jun 2020 07:39:55: #3 Pre-compute pvalue-qvalue table... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Tue, 16 Jun 2020 07:40:02: #3 Call peaks for each chromosome... INFO @ Tue, 16 Jun 2020 07:40:04: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 16 Jun 2020 07:40:04: #1 read tag files... INFO @ Tue, 16 Jun 2020 07:40:04: #1 read treatment tags... INFO @ Tue, 16 Jun 2020 07:40:06: #4 Write output xls file... /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.05_peaks.xls INFO @ Tue, 16 Jun 2020 07:40:06: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.05_peaks.narrowPeak INFO @ Tue, 16 Jun 2020 07:40:06: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.05_summits.bed INFO @ Tue, 16 Jun 2020 07:40:06: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (188 records, 4 fields): 1 millis CompletedMACS2peakCalling INFO @ Tue, 16 Jun 2020 07:40:11: 1000000 INFO @ Tue, 16 Jun 2020 07:40:17: 2000000 INFO @ Tue, 16 Jun 2020 07:40:23: 3000000 INFO @ Tue, 16 Jun 2020 07:40:24: #1 tag size is determined as 34 bps INFO @ Tue, 16 Jun 2020 07:40:24: #1 tag size = 34 INFO @ Tue, 16 Jun 2020 07:40:24: #1 total tags in treatment: 3153601 INFO @ Tue, 16 Jun 2020 07:40:24: #1 user defined the maximum tags... INFO @ Tue, 16 Jun 2020 07:40:24: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 16 Jun 2020 07:40:24: #1 tags after filtering in treatment: 3153601 INFO @ Tue, 16 Jun 2020 07:40:24: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 16 Jun 2020 07:40:24: #1 finished! INFO @ Tue, 16 Jun 2020 07:40:24: #2 Build Peak Model... INFO @ Tue, 16 Jun 2020 07:40:24: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 16 Jun 2020 07:40:24: #2 number of paired peaks: 198 WARNING @ Tue, 16 Jun 2020 07:40:24: Fewer paired peaks (198) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 198 pairs to build model! INFO @ Tue, 16 Jun 2020 07:40:24: start model_add_line... INFO @ Tue, 16 Jun 2020 07:40:24: start X-correlation... INFO @ Tue, 16 Jun 2020 07:40:24: end of X-cor INFO @ Tue, 16 Jun 2020 07:40:24: #2 finished! INFO @ Tue, 16 Jun 2020 07:40:24: #2 predicted fragment length is 35 bps INFO @ Tue, 16 Jun 2020 07:40:24: #2 alternative fragment length(s) may be 4,35,176,323,464,466,478,566 bps INFO @ Tue, 16 Jun 2020 07:40:24: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.10_model.r WARNING @ Tue, 16 Jun 2020 07:40:24: #2 Since the d (35) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Tue, 16 Jun 2020 07:40:24: #2 You may need to consider one of the other alternative d(s): 4,35,176,323,464,466,478,566 WARNING @ Tue, 16 Jun 2020 07:40:24: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Tue, 16 Jun 2020 07:40:24: #3 Call peaks... INFO @ Tue, 16 Jun 2020 07:40:24: #3 Pre-compute pvalue-qvalue table... BedGraph に変換中... WARNING: Skipping mount /opt/pkg/singularity/3.5.2/var/singularity/mnt/session/etc/resolv.conf [files]: /etc/resolv.conf doesn't exist in container INFO @ Tue, 16 Jun 2020 07:40:32: #3 Call peaks for each chromosome... INFO @ Tue, 16 Jun 2020 07:40:34: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Tue, 16 Jun 2020 07:40:34: #1 read tag files... INFO @ Tue, 16 Jun 2020 07:40:34: #1 read treatment tags... INFO @ Tue, 16 Jun 2020 07:40:36: #4 Write output xls file... /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.10_peaks.xls INFO @ Tue, 16 Jun 2020 07:40:36: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.10_peaks.narrowPeak INFO @ Tue, 16 Jun 2020 07:40:36: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.10_summits.bed INFO @ Tue, 16 Jun 2020 07:40:36: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (62 records, 4 fields): 1 millis CompletedMACS2peakCalling INFO @ Tue, 16 Jun 2020 07:40:41: 1000000 INFO @ Tue, 16 Jun 2020 07:40:47: 2000000 BedGraph に変換しました。 BigWig に変換中... INFO @ Tue, 16 Jun 2020 07:40:54: 3000000 INFO @ Tue, 16 Jun 2020 07:40:54: #1 tag size is determined as 34 bps INFO @ Tue, 16 Jun 2020 07:40:54: #1 tag size = 34 INFO @ Tue, 16 Jun 2020 07:40:54: #1 total tags in treatment: 3153601 INFO @ Tue, 16 Jun 2020 07:40:54: #1 user defined the maximum tags... INFO @ Tue, 16 Jun 2020 07:40:54: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Tue, 16 Jun 2020 07:40:55: #1 tags after filtering in treatment: 3153601 INFO @ Tue, 16 Jun 2020 07:40:55: #1 Redundant rate of treatment: 0.00 INFO @ Tue, 16 Jun 2020 07:40:55: #1 finished! INFO @ Tue, 16 Jun 2020 07:40:55: #2 Build Peak Model... INFO @ Tue, 16 Jun 2020 07:40:55: #2 looking for paired plus/minus strand peaks... INFO @ Tue, 16 Jun 2020 07:40:55: #2 number of paired peaks: 198 WARNING @ Tue, 16 Jun 2020 07:40:55: Fewer paired peaks (198) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 198 pairs to build model! INFO @ Tue, 16 Jun 2020 07:40:55: start model_add_line... INFO @ Tue, 16 Jun 2020 07:40:55: start X-correlation... INFO @ Tue, 16 Jun 2020 07:40:55: end of X-cor INFO @ Tue, 16 Jun 2020 07:40:55: #2 finished! INFO @ Tue, 16 Jun 2020 07:40:55: #2 predicted fragment length is 35 bps INFO @ Tue, 16 Jun 2020 07:40:55: #2 alternative fragment length(s) may be 4,35,176,323,464,466,478,566 bps INFO @ Tue, 16 Jun 2020 07:40:55: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.20_model.r WARNING @ Tue, 16 Jun 2020 07:40:55: #2 Since the d (35) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Tue, 16 Jun 2020 07:40:55: #2 You may need to consider one of the other alternative d(s): 4,35,176,323,464,466,478,566 WARNING @ Tue, 16 Jun 2020 07:40:55: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Tue, 16 Jun 2020 07:40:55: #3 Call peaks... INFO @ Tue, 16 Jun 2020 07:40:55: #3 Pre-compute pvalue-qvalue table... BigWig に変換しました。 INFO @ Tue, 16 Jun 2020 07:41:03: #3 Call peaks for each chromosome... INFO @ Tue, 16 Jun 2020 07:41:07: #4 Write output xls file... /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.20_peaks.xls INFO @ Tue, 16 Jun 2020 07:41:07: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.20_peaks.narrowPeak INFO @ Tue, 16 Jun 2020 07:41:07: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce11/SRX043971/SRX043971.20_summits.bed INFO @ Tue, 16 Jun 2020 07:41:07: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (12 records, 4 fields): 2 millis CompletedMACS2peakCalling