Job ID = 2589719 sra ファイルのダウンロード中... Read layout: SINGLE fastq に変換中... spots read : 8,054,469 reads read : 8,054,469 reads written : 8,054,469 rm: cannot remove ‘[DSE]RR*’: No such file or directory rm: cannot remove ‘/home/okishinya/ncbi/public/sra/SRR947322.sra.cache’: No such file or directory fastq に変換しました。 bowtie でマッピング中... Time loading reference: 00:00:00 Time loading forward index: 00:00:00 Time loading mirror index: 00:00:00 Multiseed full-index search: 00:01:16 8054469 reads; of these: 8054469 (100.00%) were unpaired; of these: 2750337 (34.15%) aligned 0 times 4478191 (55.60%) aligned exactly 1 time 825941 (10.25%) aligned >1 times 65.85% overall alignment rate Time searching: 00:01:16 Overall time: 00:01:16 マッピングが完了しました。 samtools でBAM に変換中... [samopen] SAM header is present: 7 sequences. [bam_rmdupse_core] 842262 / 5304132 = 0.1588 in library ' ' BAM に変換しました。 Bed ファイルを作成中... BedGraph に変換中... INFO @ Mon, 12 Aug 2019 18:20:46: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.05 -q 1e-05 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.05 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-05 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Mon, 12 Aug 2019 18:20:46: #1 read tag files... INFO @ Mon, 12 Aug 2019 18:20:46: #1 read treatment tags... INFO @ Mon, 12 Aug 2019 18:20:47: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.10 -q 1e-10 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.10 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-10 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Mon, 12 Aug 2019 18:20:47: #1 read tag files... INFO @ Mon, 12 Aug 2019 18:20:47: #1 read treatment tags... INFO @ Mon, 12 Aug 2019 18:20:48: # Command line: callpeak -t /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.bam -f BAM -g ce -n /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.20 -q 1e-20 # ARGUMENTS LIST: # name = /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.20 # format = BAM # ChIP-seq file = ['/home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.bam'] # control file = None # effective genome size = 9.00e+07 # band width = 300 # model fold = [5, 50] # qvalue cutoff = 1.00e-20 # Larger dataset will be scaled towards smaller dataset. # Range for calculating regional lambda is: 10000 bps # Broad region calling is off # Paired-End mode is off INFO @ Mon, 12 Aug 2019 18:20:48: #1 read tag files... INFO @ Mon, 12 Aug 2019 18:20:48: #1 read treatment tags... INFO @ Mon, 12 Aug 2019 18:20:54: 1000000 INFO @ Mon, 12 Aug 2019 18:20:55: 1000000 INFO @ Mon, 12 Aug 2019 18:20:56: 1000000 INFO @ Mon, 12 Aug 2019 18:21:01: 2000000 INFO @ Mon, 12 Aug 2019 18:21:02: 2000000 INFO @ Mon, 12 Aug 2019 18:21:03: 2000000 INFO @ Mon, 12 Aug 2019 18:21:09: 3000000 INFO @ Mon, 12 Aug 2019 18:21:09: 3000000 INFO @ Mon, 12 Aug 2019 18:21:10: 3000000 INFO @ Mon, 12 Aug 2019 18:21:16: 4000000 INFO @ Mon, 12 Aug 2019 18:21:17: 4000000 INFO @ Mon, 12 Aug 2019 18:21:17: 4000000 INFO @ Mon, 12 Aug 2019 18:21:19: #1 tag size is determined as 32 bps INFO @ Mon, 12 Aug 2019 18:21:19: #1 tag size = 32 INFO @ Mon, 12 Aug 2019 18:21:19: #1 total tags in treatment: 4461870 INFO @ Mon, 12 Aug 2019 18:21:19: #1 user defined the maximum tags... INFO @ Mon, 12 Aug 2019 18:21:19: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Mon, 12 Aug 2019 18:21:19: #1 tags after filtering in treatment: 4461870 INFO @ Mon, 12 Aug 2019 18:21:19: #1 Redundant rate of treatment: 0.00 INFO @ Mon, 12 Aug 2019 18:21:19: #1 finished! INFO @ Mon, 12 Aug 2019 18:21:19: #2 Build Peak Model... INFO @ Mon, 12 Aug 2019 18:21:19: #2 looking for paired plus/minus strand peaks... INFO @ Mon, 12 Aug 2019 18:21:20: #2 number of paired peaks: 444 WARNING @ Mon, 12 Aug 2019 18:21:20: Fewer paired peaks (444) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 444 pairs to build model! INFO @ Mon, 12 Aug 2019 18:21:20: start model_add_line... INFO @ Mon, 12 Aug 2019 18:21:20: #1 tag size is determined as 32 bps INFO @ Mon, 12 Aug 2019 18:21:20: #1 tag size = 32 INFO @ Mon, 12 Aug 2019 18:21:20: #1 total tags in treatment: 4461870 INFO @ Mon, 12 Aug 2019 18:21:20: #1 user defined the maximum tags... INFO @ Mon, 12 Aug 2019 18:21:20: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Mon, 12 Aug 2019 18:21:20: start X-correlation... INFO @ Mon, 12 Aug 2019 18:21:20: end of X-cor INFO @ Mon, 12 Aug 2019 18:21:20: #2 finished! INFO @ Mon, 12 Aug 2019 18:21:20: #2 predicted fragment length is 33 bps INFO @ Mon, 12 Aug 2019 18:21:20: #2 alternative fragment length(s) may be 2,33,555,581 bps INFO @ Mon, 12 Aug 2019 18:21:20: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.10_model.r WARNING @ Mon, 12 Aug 2019 18:21:20: #2 Since the d (33) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Mon, 12 Aug 2019 18:21:20: #2 You may need to consider one of the other alternative d(s): 2,33,555,581 WARNING @ Mon, 12 Aug 2019 18:21:20: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Mon, 12 Aug 2019 18:21:20: #3 Call peaks... INFO @ Mon, 12 Aug 2019 18:21:20: #3 Pre-compute pvalue-qvalue table... INFO @ Mon, 12 Aug 2019 18:21:20: #1 tags after filtering in treatment: 4461870 INFO @ Mon, 12 Aug 2019 18:21:20: #1 Redundant rate of treatment: 0.00 INFO @ Mon, 12 Aug 2019 18:21:20: #1 finished! INFO @ Mon, 12 Aug 2019 18:21:20: #2 Build Peak Model... INFO @ Mon, 12 Aug 2019 18:21:20: #2 looking for paired plus/minus strand peaks... INFO @ Mon, 12 Aug 2019 18:21:20: #1 tag size is determined as 32 bps INFO @ Mon, 12 Aug 2019 18:21:20: #1 tag size = 32 INFO @ Mon, 12 Aug 2019 18:21:20: #1 total tags in treatment: 4461870 INFO @ Mon, 12 Aug 2019 18:21:20: #1 user defined the maximum tags... INFO @ Mon, 12 Aug 2019 18:21:20: #1 filter out redundant tags at the same location and the same strand by allowing at most 1 tag(s) INFO @ Mon, 12 Aug 2019 18:21:20: #2 number of paired peaks: 444 WARNING @ Mon, 12 Aug 2019 18:21:20: Fewer paired peaks (444) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 444 pairs to build model! INFO @ Mon, 12 Aug 2019 18:21:20: start model_add_line... INFO @ Mon, 12 Aug 2019 18:21:20: #1 tags after filtering in treatment: 4461870 INFO @ Mon, 12 Aug 2019 18:21:20: #1 Redundant rate of treatment: 0.00 INFO @ Mon, 12 Aug 2019 18:21:20: #1 finished! INFO @ Mon, 12 Aug 2019 18:21:20: #2 Build Peak Model... INFO @ Mon, 12 Aug 2019 18:21:20: #2 looking for paired plus/minus strand peaks... INFO @ Mon, 12 Aug 2019 18:21:20: start X-correlation... INFO @ Mon, 12 Aug 2019 18:21:20: end of X-cor INFO @ Mon, 12 Aug 2019 18:21:20: #2 finished! INFO @ Mon, 12 Aug 2019 18:21:20: #2 predicted fragment length is 33 bps INFO @ Mon, 12 Aug 2019 18:21:20: #2 alternative fragment length(s) may be 2,33,555,581 bps INFO @ Mon, 12 Aug 2019 18:21:20: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.20_model.r WARNING @ Mon, 12 Aug 2019 18:21:20: #2 Since the d (33) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Mon, 12 Aug 2019 18:21:20: #2 You may need to consider one of the other alternative d(s): 2,33,555,581 WARNING @ Mon, 12 Aug 2019 18:21:20: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Mon, 12 Aug 2019 18:21:20: #3 Call peaks... INFO @ Mon, 12 Aug 2019 18:21:20: #3 Pre-compute pvalue-qvalue table... INFO @ Mon, 12 Aug 2019 18:21:21: #2 number of paired peaks: 444 WARNING @ Mon, 12 Aug 2019 18:21:21: Fewer paired peaks (444) than 1000! Model may not be build well! Lower your MFOLD parameter may erase this warning. Now I will use 444 pairs to build model! INFO @ Mon, 12 Aug 2019 18:21:21: start model_add_line... INFO @ Mon, 12 Aug 2019 18:21:21: start X-correlation... INFO @ Mon, 12 Aug 2019 18:21:21: end of X-cor INFO @ Mon, 12 Aug 2019 18:21:21: #2 finished! INFO @ Mon, 12 Aug 2019 18:21:21: #2 predicted fragment length is 33 bps INFO @ Mon, 12 Aug 2019 18:21:21: #2 alternative fragment length(s) may be 2,33,555,581 bps INFO @ Mon, 12 Aug 2019 18:21:21: #2.2 Generate R script for model : /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.05_model.r WARNING @ Mon, 12 Aug 2019 18:21:21: #2 Since the d (33) calculated from paired-peaks are smaller than 2*tag length, it may be influenced by unknown sequencing problem! WARNING @ Mon, 12 Aug 2019 18:21:21: #2 You may need to consider one of the other alternative d(s): 2,33,555,581 WARNING @ Mon, 12 Aug 2019 18:21:21: #2 You can restart the process with --nomodel --extsize XXX with your choice or an arbitrary number. Nontheless, MACS will continute computing. INFO @ Mon, 12 Aug 2019 18:21:21: #3 Call peaks... INFO @ Mon, 12 Aug 2019 18:21:21: #3 Pre-compute pvalue-qvalue table... INFO @ Mon, 12 Aug 2019 18:21:33: #3 Call peaks for each chromosome... INFO @ Mon, 12 Aug 2019 18:21:33: #3 Call peaks for each chromosome... INFO @ Mon, 12 Aug 2019 18:21:34: #3 Call peaks for each chromosome... INFO @ Mon, 12 Aug 2019 18:21:39: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.10_peaks.xls INFO @ Mon, 12 Aug 2019 18:21:39: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.10_peaks.narrowPeak INFO @ Mon, 12 Aug 2019 18:21:39: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.10_summits.bed INFO @ Mon, 12 Aug 2019 18:21:39: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (187 records, 4 fields): 2 millis CompletedMACS2peakCalling INFO @ Mon, 12 Aug 2019 18:21:40: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.20_peaks.xls INFO @ Mon, 12 Aug 2019 18:21:40: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.20_peaks.narrowPeak INFO @ Mon, 12 Aug 2019 18:21:40: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.20_summits.bed INFO @ Mon, 12 Aug 2019 18:21:40: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (34 records, 4 fields): 2 millis CompletedMACS2peakCalling INFO @ Mon, 12 Aug 2019 18:21:40: #4 Write output xls file... /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.05_peaks.xls INFO @ Mon, 12 Aug 2019 18:21:40: #4 Write peak in narrowPeak format file... /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.05_peaks.narrowPeak INFO @ Mon, 12 Aug 2019 18:21:40: #4 Write summits bed file... /home/okishinya/chipatlas/results/ce10/SRX331092/SRX331092.05_summits.bed INFO @ Mon, 12 Aug 2019 18:21:40: Done! pass1 - making usageList (6 chroms): 1 millis pass2 - checking and writing primary data (434 records, 4 fields): 3 millis CompletedMACS2peakCalling BedGraph に変換しました。 BigWig に変換中... BigWig に変換しました。